This module causes some build failures in certain setups and is not
very useful.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.
We have to use a 3.18-based kernel for that, but there are a few
limitations:
- we can not use the minimalist RPi defconfig bundled with the kernel,
namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;
- most importantly, the rpi-3.18.y branch is constantly rebased, so
there is no guarantee that the sha1 I use today will still be usable
in the long term. Using the name of hte branch is not better either.
So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Rename the VNSTAT_INSTALL_VNSTATI to VNSTAT_INSTALL_VNSTATI_CMDS,
and use 'define ... endef'.
- Use full paths for the destinations when using $(INSTALL)]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with RaspberryPi B+ and PiTFT Mini Kit - 320x240 2.8" TFT
(see [1] and [2]) and the following target configuration changes:
- cmdline.txt: add 'fbcon=map:10 fbcon=font:VGA8x8'
- add /etc/modules-load.d/fbtft.conf with 'fbtft_device'
- add /etc/modprobe.d/00-fbtft.conf with 'options fbtft_device name=adafruit28 rotate=90 gpios=dc:25'
[1] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9893.jpg
[2] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9897.jpg
[Thomas:
- Rename prompt of the Linux extension to "FB TFT drivers"
- Remove the full name of the kernel config options in the help
text. Giving their CONFIG_<foo> name is enough.
- Remove the mention of CONFIG_SPI_BCM2708, since this makes the
description RaspberryPi specific, while these drivers can work
with any SPI controller.
- Refactor the code in linux-ext-fbtft.mk to avoid duplication
between the < 3.15 and >= 3.15 cases.
- Make the fbtft package a promptless package, since there is no
point in selecting only this package, without the kernel
extension.
- Change the license to GPLv2, since it's kernel code.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove empty new line at end of .mk file.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
* Add hash file
* Tweak the initscript to use a pidfile to avoid nasty warnings
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As source url use the git repository instead of the unavaiable svn
repository.
Also because the git repository does not include the netsurf core
buildsystem source that are needed to build this package add as
dependency the netsurf-buildsystem package and use those files through a
symbolink link.
This fix the following error:
svn: E670002: Unable to connect to a repository at URL 'svn://svn.netsurf-browser.org/trunk/libsvgtiny'
svn: E670002: Unknown hostname 'svn.netsurf-browser.org'
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the NetSurf project shared build system, used by various NetSurf
sub-projects like the libsvgtiny project.
[Thomas: use cp -dpfr instead of just cp -r, to match what we do in
other Buildroot packages.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to install all the DTBs:
- standard DTBs for standalon A/B and A+/B+ models;
- overlay DTBs for the 'hats' addon boards.
Install the DTBs as per the traditional layout expected by all RPi
users, that is:
- base DTBs alongside the other boot files;
- overlay DTBs in a sub-directory.
This requires the user provide a specially configured Linux defconfig
file, as the default ones do not enable USE_OF.
[Thomas: adjust comment explaining why we use a different version when
installing the DTBs is selected.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Raspberry Pi can boot a kernel with device tree support. But at the
same time, the RPi folks wante to keep the old-fashioned, ATAG-based way
of booting (don't ask...).
So, the bootloader needs to know whether the kernel it is loading has DT
support or not. For that, it looks at the end of the kernel image for a
magic footer. If found, it loads a device tree and sets the registers
appropriately so that the kernel finds the DTB. If not found, it loads
the kernel with the traditional ATAGS.
Where it becomes a bit tricky, is that the DTB is different for models
A/B and A+/B+ (that is A and B use the same DTB, while the A+ and B+ use
a second DTB). The bootloader is capable to load the correct DTB from a
specially named file. That is:
- on A/B, it loads bcm2708-rpi-b.dtb
- on A+/B+, it loads bcm2708-rpi-b-plus.dtb
If the DTB is differently named, the bootloader won't find it, will not
load any DTB at all, and revert to booting with ATAGS.
It is possible to specify what DTB to load, by adding an new config
option 'device_tree=file.dtb' in config.txt, but then the firmware on
the SDcard is no longer bootable on both the original models and the
Plus models.
So, add a script that appends the appropriate footer to the kernel
image. The script is vampirised from the RPi's tools repository, but a
new package is *not* added just for that script: the whole repository is
300+ MiB, and a checkout is 600+ MiB; it is not pertinent to add this as
a new package for a script that weights a few KiB...
Install that script as a host utility, too.
Notes: lots of information is available in this thread on the RPi forums:
http://www.raspberrypi.org/forums/viewtopic.php?f=29&t=93015
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those files were previously installed, but that's no longer the case
since we select in the menuconfig which version of the bootloader we
install.
[Thomas: fix minor typo in commit log.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add 'cp -dpfr' instead of a convuluted use of 'tar c' + 'tar
x' do not a copy.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit slightly cleans up the newt patches: use Git formatted
patches, improve title and description. This was done in preparation
for the upstream submission of those patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typo in commit title.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 799c12e (xz-utils: needs threads) tried to fix an autobuild
failure by requiring threads. But xz-utils can be configured without
thread support (even though it is one of the most prominent
selling-points of the latest release!).
[Thomas: use --{enable,disable}-threads instead of
--enable-threads={yes,no}, to match what we generally do in most
autotools packages.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-9402 - denial of service in getnetbyname function.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Indicate in the Config.in help text that this policy compiler is
SELinux related.
- Rewrap Config.in help text and remove trailing white space.
- Add a comment in the .mk file to indicate why we're passing
DESTDIR= at build time.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Irqbalance is a daemon to help balance the cpu load generated by
interrupts across all of a systems cpus.
[Thomas:
- Add upstream URL in Config.in help text.
- Fix indentation of init script.]
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For portability. All other Buildroot scripts (i.e. scripts that run on
host) already use the "/usr/bin/env bash" shebang.
This change is needed for NixOS, which lacks a global /bin/bash.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libiio library will compile fine with a toolchain that doesn't
support threads (tested with br-arm-full-nothread.config).
Only the IIOD program requires support for threading.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-0559, CVE-2015-0560 - The WCCP dissector could crash.
CVE-2015-0561 - The LPP dissector could crash.
CVE-2015-0562 - The DEC DNA Routing Protocol dissector could crash.
CVE-2015-0563 - The SMTP dissector could crash.
CVE-2015-0564 - Wireshark could crash while decypting TLS/SSL sessions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-8150 - When libcurl sends a request to a server via a HTTP
proxy, it copies the entire URL into the request and sends if off.
If the given URL contains line feeds and carriage returns those will be
sent along to the proxy too, which allows the program to for example
send a separate HTTP request injected embedded in the URL.
CVE-2014-8151 - libcurl stores TLS Session IDs in its associated Session
ID cache when it connects to TLS servers. In subsequent connects it
re-uses the entry in the cache to resume the TLS connection faster than
when doing a full TLS handshake. The actual implementation for the
Session ID caching varies depending on the underlying TLS backend.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Getting the hashes from upstream is not always possible:
- Mentor's Sourcery: seems to require an account
- TI's Arago: not able to locate the upstream.
- Linaro: only signatures
- Misc other toolchains.
So, all hashes were locally computed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using a custom local tree, we're using the OVERRIDE_SRCDIR
internally, which means we do not apply patches. Since this is the
expected behavior, make BR2_LINUX_KERNEL_PATCH and
BR2_LINUX_KERNEL_CUSTOM_LOCAL options exclusive.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our curl package is really named libcurl.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This makes "make menuconfig" also work on systems where ncurses is not
installed in a standard location (such as on NixOS).
This patch changes ccflags() so that it tries pkg-config first, and only
if pkg-config fails does it go back to the fallback/manual checks. This
is the same algorithm that ldflags() already uses.
[This patch is already applied upstream (is part of linux v3.18):
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=be8af2d54a66911693eddc556e4f7a866670082b
I'm adding this instead of doing a full upstream kconfig sync because
there was a conflict in one of the Buildroot kconfig patches (against
linux 3.18-rc1), which I was unable to resolve. Just drop this patch next time
Buildroot kconfig is synced against upstream.
]
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot unexports PKG_CONFIG_PATH in the top-level Makefile for purity
reasons. But it has an unfortunate side-effect in that "make menuconfig"
will not (necessarily) be able to pick up ncurses via host pkg-config,
breaking "make menuconfig" on systems where ncurses is installed in a
non-standard location.
This patch saves the original PKG_CONFIG_PATH variable in
HOST_PKG_CONFIG_PATH and restores the original PKG_CONFIG_PATH variable
only in the sub-processes that builds the various menuconfig/nconfig/...
targets.
(PKG_CONFIG_PATH has to be placed in front of the make command so that it
propagates to sub-processes. If given as an argument, it doesn't work.)
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>