Utility for testing pluggable authentication modules (PAM) facility.
While specifically designed to help PAM module authors to test their
modules, that might also be handy for system administrators interested
in building a centralised authentication system using common standards
such as NIS, SASL and LDAP.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Peter: drop spelling fix patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The compiler recognizes a specific 'march' value for Octeon III processors,
so create a 'Target Architecture Variant' entry for it in the target menu.
Note: support for '-march=octeon3' was added in gcc 5.x. However, the
official compiler provided by Marvell (Cavium Networks) uses gcc 4.7.x (and
supports -march=octeon3 via their own modifications). For this reason, no
line 'select BR2_ARCH_NEEDS_GCC_AT_LEAST_5' is added.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The compiler recognizes a specific 'march' value for Octeon II processors,
so create a 'Target Architecture Variant' entry for it in the target menu.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's unclear why Buildroot only defined MIPS 32/64 releases 1, 2, 5 and 6
while 3 exists as well.
Interesting fact:
"Release 4 was skipped because the number four is perceived as unlucky in
many Asian cultures."
https://en.wikipedia.org/wiki/MIPS_architecture#MIPS32/MIPS64
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0001 is no longer needed as it has been ported to this version.
Also, the README changes but the licence is still GPL-2.0+
Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ld-*.so and libpthread*.so* are not stripped in the same way as other
binaries because some applications need symbols in these libraries in
order to operate correctly.
However, the special handling for these binaries ignores the usual
BR2_STRIP_EXCLUDE_* rules so it is not possible to build an image which
has debugging symbols in these binaries.
Pull out the common find functionality so that we can build two find
commands that re-use the common exclusion rules.
Fix-suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add one test case to ensure the hash is checked for git packages:
- correct hash;
- wrong hash;
- no hash file.
Add required infra:
- a GitRemote class, that can start a git server in the host machine to
emulate a remote git server under the control of the test;
- a new base class, called GitTestBase, that inherits from BRTest and
must be subclassed by all git test cases.
Its setUp() method takes care of configuring the build with a
br2-external, avoiding to hit http://sources.buildroot.net by using
an empty BR2_BACKUP_SITE. It also avoids downloading not
pre-installed dependencies (i.e. lzip) every time by calling 'make
dependencies' using the common dl directory, and it instantiates the
GitRemote object.
Besides the Python scripts, add some fixtures used during the tests:
- a br2-external (git-hash) with one package for each part of the test
case;
- a static git bare repo (repo.git) to be served using GitRemote class.
Neither the br2-external nor the check hash functionalities are the
subject of these tests per se, so for simplicity limit the check to the
error codes and don't look for the messages in the log.
Thanks to Arnout for the hint about how to add a bare repo to test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: split long line; reorder imports to satisfy flake8]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This tool is used to send commands to imx6 based hardware using NXP's
UTP protocol.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Initially used by the host build of the utp_com package.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a config option which will force buildroot to
build all host dependencies even if they are already present on the
host system. This may be a desirable option if different hosts are
used to build the same source. In this case, some packages will be
built on one host that are not built on another. This is problematic
if build source archives are cached afterwards for offline builds.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Peter: reword, drop exit 1, reshuffle]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The color for 'extract' is very similar to the one for 'install-images'.
Both are cyan-like.
Replace the former by a pale blue to make all colors sufficiently distinct.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Total build time also involves download. Getting a visibility on the impact
of that step can be important for users/admins, e.g. to evaluate different
methods of BR2_PRIMARY_SITE.
Colors used are some kind of purple (primary scheme) and light orange
(alternate scheme).
Signed-off-by: Mathias De Maré <mathias.de_mare@nokia.com>
[ThomasDS: rebase and update colors to avoid confusion]
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add config options for a few pugixml configurables.
- Xpath support is enabled by default but has a size impact. Disabling it
reduces the size significantly (it almost halves). Output of 'size' on the
library compiled for x86:
- Xpath support enabled
160374 1244 28 161646 2776e output/target/usr/lib/libpugixml.so.1.7
- Xpath support disabled
92754 880 8 93642 16dca usr/lib/libpugixml.so.1.7
- Compact and header-only modes are not strictly needed for our use case, but we
did the work anyway and may be useful for someone else.
Signed-off-by: Wouter Vermeiren <wouter.vermeiren@nokia.com>
[ThomasDS:
- align with Buildroot coding style
- retain only feature options: xpath, compact mode, header-only]
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Previously the sysv init script install was conditional based on ntpd
being selected, now that sntp also has an init script and could be
selected independent of ntpd, a common install is necessary.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch rework the use of query.yahooapis.com to do the conversion
from xml to json required by our script and moves to the use of a js
library. Datas are therefore now converted in json format on the client.
Unfortunately, cause of the CORS restriction on nabble and
buildroot.org, we cannot retrieve directly the xml data from these
servers and we need a CORS proxy to do that.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Peter: use sha256 integrity]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some of our cdn's are going discontinued (rawgit) and some others are
not recommended anymore, thus we update to the recommended cdnjs.
This patch enables also SRI protection on js to be sure the modules we
download are not manipulated in any way.
About SRI:
https://developer.mozilla.org/en-US/docs/Web/Security/Subresource_Integrity
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For symmetry with the Kconfig-based packages offering comprehensive
targets like linux-update-defconfig, barebox-update-defconfig and so
on, add a new top level update-defconfig target to run savedefconfig.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d2b52cebf3 disabled clapack on MIPS
platforms, to fix an autobuild failure (unfortunately, the results are no
longer available). The argument was:
"Disable this package for MIPS because it needs IRIX headers and
libraries."
Nevertheless, today compilation on MIPS seems to work fine. Testing was done
with test-pkg (armadillo depends on clapack):
$ echo "BR2_PACKAGE_ARMADILLO=y" > config.snippet;
$ utils/test-pkg -p armadillo -a -c config.snippet
br-mips32r6-el-hf-glibc [1/8]: OK
br-mips64-n64-full [2/8]: OK
br-mips64r6-el-hf-glibc [3/8]: OK
br-mipsel-o32-full [4/8]: OK
mips64el-ctng_n32-linux-gnu [5/8]: OK
mips64el-ctng_n64-linux-gnu [6/8]: OK
sourcery-mips64 [7/8]: OK
sourcery-mips [8/8]: OK
8 builds, 0 skipped, 0 build failed, 0 legal-info failed
Manual build tests were also done for mips32r2 with gcc 4.9.x and gcc 7.x,
and for M5150 with gcc 7.x (Buildroot-built toolchains in these three
cases).
Also building and running on Octeon III, using the toolchain provided by
Cavium Networks / Marvell, works fine.
Not seeing any problem (but also not understanding the original problem),
re-enable clapack (and armadillo) on MIPS. If any problems would pop up in
the future, they should be investigated in detail and a more fine-grained
solution should be taken than disabling on MIPS altogether.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that Buildroot requires python >= 2.7, qemu no longer needs a
host-python, as it does not use any external Python modules to build.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We now require python 2.7+, so update prerequisite.txt to match.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Older distributions such as CentOS6 come with python2.6, which causes build
failures in packages such as host-libglib2 because they require python2.7 and
above.
host-libglib2 will produce the error message:
/bin/sh: python2.7: command not found
Python2.7 is a hard-coded value in configure.ac. If one changes the value to
just "python," the following stack trace is produced:
Traceback (most recent call last):
File "./gdbus-2.0/codegen/gdbus-codegen.in", line 55, in <module>
self.outfile.write(LICENSE_STR.format(config.VERSION))
ValueError : sys.exit(codegen_main.codegen_main())
zero length field name in format
Instead of supporting an ancient version of Python that had its support ended
in October os 2013, it would be more pragmatic only to support Python2.7 and
above.
Luckily; CentOS6 has the centos-release-scl repository, which allows users to
install python2.7, and Debian 8 comes with Python2.7 already, making this patch
relatively low impact.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Peter: only look at major.minor to handle x.y.z with z < 10]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Disable Endace DAG card support as libdag is not available in
buildroot
- Add upstream patch to fix build on musl
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Tested-by: Yann E . MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
KCoreAddons provides classes built on top of QtCore to perform various
tasks such as manipulating mime types, autosaving files, creating
backup files, generating random sequences, performing text
manipulations such as macro replacement, accessing user information
and many more.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[yann.morin.1998@free.fr + titouan.christophe@railnova.eu:
- add missing qt5tools select
- fix hash for new version
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[Thomas:
- fix typo in LICENSE_FILE -> LICENSE_FILES
- add hash for license file
- change license to LGPL-2.1 instead of LGPL-2.1+, since at least one
file says "2.1" without the "or later" option, and so saying just
LGPL-2.1 is the safe choice
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It is set when the platform exposes the struct ucontext_t.
This avoids duplication of logic inside each package requiring
the use of that type.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not check for C++ compiler as libgeotiff is written in C otherwise
build will fail on toolchains without a working C++ compiler:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in
`/data/buildroot/buildroot-test/instance-1/output/build/libgeotiff-1.4.2':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
Fixes:
- http://autobuild.buildroot.org/results/72f1c5c1b8fc337a1cff4b280abe99afd65f945b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also added license hash
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[Thomas: use a sha256 hash for the license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The openssh privilege separation feature, enabled by default,
requires that the path /var/empty exists and has certain permissions
(not writable by the sshd user). Note that nothing ever gets writting
in this directory, so it works fine on a readonly rootfs.
See README.privsep included as part of the openssh distribution.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The netsurf build system creates a stamp file inside TMP_PREFIX to
know if the build was done, and if the stamp file exists, it doesn't
do any build. Therefore, having this stamp file in STAGING_DIR
prevents from rebuilding netsurf, even after removing its entire build
directory: the stamp file exists in STAGING_DIR, and netsurf doesn't
build anything, causing the installation to fail.
We fix this by putting this temporary directory inside the netsurf
build directory. We must mkdir this directory manually, otherwise the
build fails with:
COMPILE: src/stylesheet.c
In file included from src/stylesheet.c:12:0:
src/stylesheet.h:14:10: fatal error: libwapcaplet/libwapcaplet.h: No such file or directory
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: mkdir it first]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds the installation of a startup script if the sntp
utility is selected as an option. The utility is design to do a
one time step/slew adjustment of the system time (similar to the
ntpdate tool http://support.ntp.org/bin/view/Dev/DeprecatingNtpdate).
One nice benefit over ntpdate is that sntp can run while ntpd is still
running. However, ntpd may still need to be restarted if the time
step was large enough.
The script provides the ability to override the arguments as part of a
/etc/defaults/sntp file.
On a local LAN, the initial large step adjustment took less then
one second to be retrieved and system time updated. If a user already
has a RTC maintaining the time and the system was powered off for
a long period of time, the script assumes a slew adjustment when
+/- 128ms, rather then a time step(jump). This could be further
tuned by a user with the /etc/defaults/sntp configuration file.
One NTP pool server is being set as sntp uses all of the servers
provided when the DNS is resolved as servers to attempt to retrieve
time from before timing out. It looks like currently that is 4 servers
per *pool.ntp.org hostname.
Cc: Oscar Gomez Fuente <oscargomezf@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Oscar Gomez Fuente <oscargomezf@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add an option to compile device trees in Linux with symbol generation
such that device tree overlays can be loaded on the target system
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[Arnout: remove "default n" and move setting of LINUX_MAKE_ENV to the
place where the rest is set.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
bluez5_utils support has been added since version 1.8.0 and
b3776f3d50
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
canusb has been removed since version 1.8.1 and
93ca5ff703
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 2.4.0.2, compilation under glibc 2.28 is fixed (and our local patch can
thus be removed).
While at it, bump to the latest released version 2.5.0.0.
Note: change in COPYING file is only the copyright year.
>From the NEWS file:
"""
In 2.5.0.0
----------
- Optional nsss support.
- s6-devd, s6-uevent-listener, s6-uevent-spawner removed.
In 2.4.0.2
----------
- s6-logwatch rewrite.
- Better portability with old glibc versions.
- s6-uevent-listener and s6-uevent-spawner are marked as deprecated. (The
mdevd package obsoletes them.)
"""
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump opentracing-cpp from 1.2.0 to 1.5.1.
The license has changed from MIT to Apache-2.0.
The patch is removed because it has been upstreamed.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
[ThomasDS: Additional bump from v1.3.0 to v1.5.1]
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cmocka dependency has been added in version 1.3 with
e3a3a6db30
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
hwloc dependency has been added in version 1.4 with
c31b274499
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit de336584d2 (package/docker-engine: split docker-{cli, engine},
bump to v18.09.0), the docker-engine package only builds the daemon part,
and the .mk file no longer use the _DAEMON option, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
