Building host-python in parallel sometimes causes "Bus error" during
the installation step on our autobuilders, such as:
http://autobuild.buildroot.org/results/04bcc907c5e075fe1f39d4f49dcc50ec93708eb4/build-end.log
Extensive testing on one autobuilder has shown that building
host-python with MAKE1 work arounds this strange problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by Johan Sagaert in the mailing list, if it's building with
a uClibc toolchain with locale enabled the build fails since the new
gettext does a locale hack for glibc which isn't needed nor supported.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/5963d35b8933c452b8574c964e407c23a5d0412f
The microblaze toolchain has sys/inotify.h, but doesn't provide inotify_rm_*
functions, so disable inotify support.
Also disable the legacy dnotify support (which is used when inotify support
is disabled) as it has bitrotten upstream and no longer builds.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt configure option for specifying a custom qconfig.h
file changed from -config to -qconfig. This makes the
corresponding change in qt.mk.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump QEMU to 1.2.1.
Note: 1.3.0 is out now, but ./configure has changed a bit, and there are
new dependencies, so the bump to 1.3.0 is postponed for a litle while...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
'host-*' packages should depends on other 'host-*' packages,
not on target packages.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the upcoming introduction of qemu-on-target, we need to properly
separate the variables used for the host qemu, from the variables
used for the target qemu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Introduce a virtual 'jpeg' package, which pulls in either libjpeg or
jpeg-turbo depending on a choice selection.
Rename jpeg package to libjpeg so we can reuse 'jpeg' for the virtual
package, making the change transparent to existing users and all the
packages using libjpeg.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The uboot-tools.mk has a copy of BUSYBOX_UNINSTALL_TARGET_CMDS
in it, presumably due to a copy/paste error. This definition
is overriding the (identical) definition in busybox.mk.
Also, add license info.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to fix some other build problem of libhid, we'll need to do
modifications to the configure.ac. Therefore, let's first convert the
current patch on configure to a patch on configure.ac, and mark the
package as AUTORECONF=YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many configure scripts support an option like --disable-doc, --disable-docs
or --disable-documentation. Pass all of these to configure.
In addition, not all Xorg packages accept the --disable-xxx. Instead they
look for xmlto and/or fop and build documentation if they exist. For host
packages, this may lead to build errors because /usr/bin/xmlto uses libxml2
and we set LD_LIBRARY_PATH to point to $(HOST_DIR)/lib, which may contain
a libxml2 as well. So it's essential to disable xmlto for host packages.
Also some whitespace cleanup.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
QEMU is such a snakes-nest of licenses... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OpenSSL's assembly optimizations por PowerPC seem to be broken for at
least 4xx cores.
Thanks go to Jan Schunke for reporting and testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The longcalls option allows calls across a greater range of addresses.
This option may degrade both code size and performance, but
the linker can generally optimize away the unnecessary overhead
when a call ends up within range
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Downloads.sourceforge.net doesn't like the double '/'.
Reported-by: Viallard Anthony <viallard@syscom-instruments.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Danomi Manchego <danomimanchego123 at gmail.com>
We really only need the host build of libglib2 for a few helper
programs that are used for the target build of libglib2. Therefore,
trying to use bells and whistles like DTrace, GCov and SystemTap is
totally useless.
And it is actually harmful, since it is causing build failures on the
gcc110 PowerPC-based autobuilder that apparently has some
DTrace-feature installed. This commit therefore fixes:
http://autobuild.buildroot.org/results/1c62d1ce10937bd21f5afcb73782b939d10c2038/build-end.log
Which has been polluting our autobuilder logs since several weeks now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The rt-tests package extensively use threads, so this package should
only be available if the toolchain has thread support.
[Peter: add comment when not available]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we have deprecated the capability of building a toolchain for
the target, it makes sense to also deprecate ccache for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Move the git reference directly to git-ls-remote rather than
piping the output to grep, to help avoid reporting partial
matches rather than the actual requested reference. Also,
add quotes to protest "test" from failing when multiple
strings are reported.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Disable documentation build, it seems to break with older
texlive/kpathsea versions, fixes:
http://autobuild.buildroot.net/results/44327b543d8918929bf252c5284e8691fda87fd0/
Also switch to alioth mirror since the original tarball is gone from the
regular site when 1.0.23 was released.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The legal-info target (and possibly others as well) depends on
<pkg>-extract to make sure the license file is available. However,
when <PKG>_OVERRIDE_SRCDIR is active, the <pkg>-extract target
doesn't exist.
To solve this, we add <pkg>-extract which depends on <pkg>-rsync.
While we're at it, we do the same for <pkg>-patch. That avoids the
same problem in the future if something starts depending on
<pkg>-patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There is a check for OVERRIDE_SRCDIR in pkg-generic.mk that is
supposed to produce a warning when OVERRIDE_SRCDIR is active.
This does not work and instead the whole make terminates with
an error message.
This patch changes the check for active OVERRIDE_SRCDIR so that
it works as expected.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Netatalk need host-pkgconf, otherwise the configure script is complaining.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Requires java, javac and jar on the build machine, similar to how we
require gcc/g++.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
classpath: fixup
When openSSL is selected, cURL is configured to use it.
But in this case, the libcurl.pc file /forgets/ to require link
against -ldl.
This can happen, for example, when BR2_PREFER_STATIC_LIB is not set,
but an executable wants to be linked statically (for various reasons
which are irrelevant here).
Fix that by appending a 'Requires: openssl' line to libcurl.pc.in,
but only if openSSL is enabled.
As suggested by Arnout, do it in a post-patch hook, rather as a
post-install hook.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Pulseaudio selects libtool, so get rid of the deprecated annotation so
people don't get warnings about unmet dependencies when exiting menuconfig.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some git versions (e.g. 1.7.0) do not treat trying to shallow clone
a non existing branch or tag as a fatal error but report a warning
and clone HEAD instead. Thus the fallback mechanism does not work
in this case.
This patch introduces a check for the presence of the requested
version as a branch or tag before trying the shallow clone. It
also removes the need to do two clones when a sha1 is given as
a packege version.
[Peter: use cut -f2-]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
TuioServer.cpp uses usleep but did not include <unistd.h>. This
patch adds the missing #include. This issue has been reported
upstream.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libsigc++ developer documentation was being copied onto the target.
Add a clean-up to fix that.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Pyhton 2.7.3 includes several security fixes.
See: http://www.python.org/download/releases/2.7.3/
Also fixes the patch making sqlite optional and remove the symlink patch
(which has been fixed upstream).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Strip libthread_db the same as any other library, but strip libpthread
with --strip-debug. See the relevant mailing list discussion [1] for
additional details.
[1] http://lists.busybox.net/pipermail/buildroot/2012-October/060126.html
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
perlcross seems to set the installation paths differently than perl's
Configure, so adapt the reference to these paths in cpanminus.
[Francois: install into /usr/lib/perl]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's still broken, but is someone wants to try it out then at least
the dependency is there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Configure -A symbol=val generates a extra space in config.sh,
which causes failure like this :
Building Module-Runtime-0.013
Unknown OS type ' linux' - using default settings
[Arnout: use -A define:foo instead of patching config.sh]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
configure had to be called twice because with --mode=cross the
miniperl-step failed. However, just leaving out the --mode parameter
is sufficient to make it work. Since GNU_TARGET_NAME is always
different from the host's tuple (it has -buildroot- in it), we can
safely assume that the configure script will automatically enter
cross mode.
Also fix a type in perladmin definition.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Dan Pattison at ethertek ca.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now we are using perlcross, the patches to make perl work with qemu are
redundant, so remove them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The flex binary uses fork() so it breaks on !MMU builds.
Since we usually don't require flex in the target and the common
scenario is that we just want libfl in staging reverse the options so
that BR2_PACKAGE_FLEX just builds and install libfl.a and change the
LIBFL option to BR2_PACKAGE_FLEX_BINARY to install the binary in the
target.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is GPLv2+ as pointed out by Arnout]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also fix directfb build avoiding the following error to occur
(since FCEF_FOLLOW has been added in linux-fusion-8.9.0):
libtool: compile: /opt/br/output/host/usr/bin/ccache /opt/br/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -DHAVE_CONFIG_H -I. -I../.. -I../../include -I../../lib -I../../include -I../../lib -DDATADIR=\"/usr/share/directfb-1.4.17\" -DMODULEDIR=\"/usr/lib/directfb-1.4-6\" -D_REENTRANT -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -ffast-math -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Os -g2 -g3 -fno-inline -Wno-inline -D_GNU_SOURCE -finstrument-functions -std=gnu99 -Werror-implicit-function-declaration -MT call.lo -MD -MP -MF .deps/call.Tpo -c call.c -fPIC -DPIC -o .libs/call.o
call.c: In function 'fusion_call_execute3':
call.c:311:66: error 'FCEF_FOLLOW' undeclared (first use in this function)
call.c:311:66: note: each undeclared identifier is reported only once for each function it appears in
call.c: In function 'fusion_world_flush_calls':
call.c:444:54: error 'FCEF_FOLLOW' undeclared (first use in this function)
make[5]: *** [call.lo] Error 1
make[5]: Leaving directory `/opt/br/output/build/directfb-1.4.17/lib/fusion'
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The plugin registry can take a while to be generated when GStreamer is
initialized. Turning it off can speed up up GStreamer application launch
times. Default behaviour is unchanged.
Signed-off-by: Tim Sheridan <tim.sheridan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Changing it to Filesystem and flash utilities gives far better navigation
for mtd utils.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch is no longer necessary since strace-v4.5.15 which always
defines CTL_PROC. Specifically strace git commit
35a55785ea8ff44d214af52085e3a5ea624730aa.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libpcap package contained some interesting attempts to support a
static-only build, but it was not working:
http://autobuild.buildroot.org/results/01038d3b970092d894d2bae80679247e65722785/build-end.log
In fact the configure.in of libpcap has provision to support
--enable-shared/--disable-shared, but the generated configure script
in the libpcap package has not been regenerated with the configure.in
changes.
So basically, enabling LIBPCAP_AUTORECONF=YES ensures that the
configure script gets generated, which brings us a working
--enable-shared / --disable-shared.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The autobuilders are falling over building lcdproc, with failures like the
following.
http://autobuild.buildroot.net/results/622b7da10be751c725ba25eb40102269790b4b03/build-end.log
As Thomas Petazzoni has pointed out, the compile command lines incorrectly
contain host header and library search paths, such as the following.
-I/home/peko/scratch/host/usr/include/freetype2
-L/home/peko/scratch/host/usr/lib -lfreetype
This patch changes the lcdproc package to pass the freetype installation
prefixes on the configure command line.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox does partial linking of its modules before linking everything
together into the binary. Those partial links are done without the
standard libraries, but that also means -ltirpc can't be found. In
addition, this probably fails horribly with static linking (untested).
The problem is that the LDFLAGS are also used in the partial links.
So instead, use CFLAGS_busybox, which is only used for the busybox
link step. Also make sure that this is passed through the environment,
not on the command line, so the busybox Makefile can still append to
it.
Fixes e.g.
http://autobuild.buildroot.net/results/e8351e3ba86fdcdb2999548658271a6fde0526a9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.
In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc pretends to implement <fenv.h> as it installs the header, but
in practice, it only implements the functions for i386. This makes gsl
unhappy as it detects fenv.h, but then cannot use the fenv functions.
Fixes:
http://autobuild.buildroot.org/results/732cc07faeca2a9098dc5106e8f654eb1323451a/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 1.2 we were using doesn't build on ARM Thumb platforms:
http://autobuild.buildroot.org/results/94ef6be7dcb31021462e7313724217627d4b29df/build-end.log
Moreover, the 7.2 version is the one used by Debian/Ubuntu, and it has
been tested to build fine with the two packages that depend on
libatomic_ops: libdrm and pulseaudio.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
mesa3d now generates some C files at build time (related to the OpenGL
API) from XML files. This generation process is done using Python
scripts that require the libxml2 Python module.
Patch based on the initial work of Will Wagner (Thanks Will).
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch based on the initial work of Will Wagner (Thanks Will).
libxml2 host library with python support is required to build mesa3d (7.10.1)
Signed-off-by: Vellemans Noel <noel.vellemans@visionbms.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 3c90f75496 made Python use a
special ./configure command in order to avoid --enable-shared
--disable-static being passed, because it was causing issues when
building certain modules for a 64 bits system.
However, not having a shared libpython2.7 library for the host
prevents the libxml2 Python binding to get built.
So instead, we use the default configure command, but we add
--enable-static which is needed for Python to build correctly.
Note that we tested the build of Python on a 64 bits host as well as
the build of Python for a 64 bits target, and both went fine, with all
modules built properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
(Possibly) fixes#5354
The lua shared library patch was creating the shared library with
-nostdlib -lgcc for some unknown reason, which most likely is
the reason for the link issue reported in #5354.
Fix it by dropping these arguments, so gcc gets to figure out itself
what dependencies are needed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
automake, autoconf, libtool and make on the target are basically
useless if we don't support building a toolchain on the target. Of
course, the host variant of automake, autoconf and libtool will remain
available.
[Peter: fixup to apply after perl change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes multiple security isssues, most of them of the server component
though.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cpanminus is currently responsible for about half of the autobuilder
failures, due to the missing dependency on host-qemu. However, even
with the host-qemu proposed by Arnout, cpanminus will still not work
properly: it will try to execute on the build machine executables
built for the target. While qemu is here to emulate the instruction
set, there is still the unsolved problem of kernel headers version
mismatch between the target and the build environments.
So the whole approach that consists in using host-qemu for building
simply cannot work properly, and until it is solved, the package
should be marked as broken.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
kexec only supports the following architectures.
i?86
powerpc
powerpc64
arm*
s390x|s390
sh4|sh4a|sh3|sh
mips*
cris
crisv32
ia64
x86_64
alpha
The Buildroot kexec package is available when an unsupported target
architecture is selected, leading to autobuild failures like the following.
http://autobuild.buildroot.net/results/e706b08abb4fd1987fc4aa970d6be50fc92dc1fa/build-end.log
This patch makes the kexec package available only for the supported
architectures.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove an lcdproc patch which has been rejected upstream. It has been
decided by lcdproc developer Markus Dolze that the behaviour of the
client_add_key command when handling the minus key is "intentional to
some degree."
This patch also takes the opportunity to remove the version number from the
single remaining lcdproc patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The lcdproc version bump to 0.5.6 has resulted in autobuilder failures such as
the following.
http://autobuild.buildroot.org/results/9967bc20a6094e836c4c18ff2cd30edef143bb8e/build-end.log
The 0.5.6 release added a new glcd driver, which requires the freetype and zlib
libraries. This patch makes the lcdproc package depend on freetype and zlib.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that libnfc has also switched from Subversion to Git.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixing linking time error with certain toolchains. The issue caused by a missing explicit linking to
libpthread. The failed buildlog:
Linking CXX executable testgenerictypes_exec
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libQtCore.so: undefined reference to symbol 'pthread_cancel'
/home/buildroot12git/output/host/usr/lib/gcc/arm-buildroot-linux-uclibcgnueabi/4.6.3/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: note: 'pthread_cancel' is defined in DSO /home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0 so try adding it to the linker command line
/home/buildroot12git/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/lib/libpthread.so.0: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make[3]: *** [templates/tests/testgenerictypes_exec] Error 1
make[3]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[2]: *** [templates/tests/CMakeFiles/testgenerictypes_exec.dir/all] Error 2
make[2]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/home/buildroot12git/output/build/grantlee-0.2.0'
make: *** [/home/buildroot12git/output/build/grantlee-0.2.0/.stamp_built] Error
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: reformat Config.in to fit 80-col]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since perl no longer requires host-qemu, autoconf and automake work
again on the architectures that are not supported by host-qemu.
This reverts commit c65d92e8e2.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build failure:
extra/checksum.c:16:25: fatal error: netinet/ip6.h: No such file or directory
compilation terminated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
uClibc doesn't provide NSS support, so we shouldn't try to include nss
related headers or call nss related functions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow quota to use the non-reentrant version getrpcbynumber(). This
should not be a problem as quota tools are not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc does not implement the reentrant function getrpcbynumber_r(),
so allow nfs-utils to use the non-reentrant version
getrpcbynumber(). This should not be a problem as nfs-utils tools are
not multi-threaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we will need to add more patches to nfs-utils, we need a correct
ordering when applying patches. Therefore, reformat the patches to use
a git format and git naming.
The nfs-utils-dont-mix-flags.patch is no longer needed as it was
patching Makefile.in files that were being regenerated due to the
package having _AUTORECONF = YES. The Makefile.in are properly
regenerated thanks to the nfs-utils-0002-Patch-taken-from-Gentoo.patch
patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When uClibc has RPC support, it is not needed to define the 'struct
rpcent' structure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc-0005-rpcent-mark-getrpcbyname-name-argument-as-const-char.patch
fixes build failures like
http://autobuild.buildroot.org/results/7a3a751fe02c639ca75c575ca7fe20a72372b8d6/build-end.log.
libtirpc-0006-rpcent-remove-prototypes-of-reentrant-variants.patch
ensures that functions not implemented by libtirpc are not described
in a header file. It also allows to remove those prototypes that were
not matching the functions available in glibc or uClibc, causing
mismatch in prototypes.
libtirpc-0007-doc-Makefile.am-fix-out-of-tree-installation.patch is a
minor fix.
The following patches (8 to 9) allow libtirpc to provide sufficient
things to be able to build rpcbind on top of it.
All these patches have been submitted upstream on the libtirpc-devel@
mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch numbers in [PATCH x/y] are quite useless within the context
of Buildroot, and generate noise when patches are re-ordered.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The bluez-utils package does not build for the avr32 architecture; this
results in autobuilder failures such as the following.
http://autobuild.buildroot.net/results/d737d1220d7566289eee802fd580a49d8c456c97/build-end.log
The underlying problem is with the <sys/epoll.h> header provided by the
antiquated avr32 toolchain; this header lacks definitions for
epoll_create1() and EPOLL_CLOEXEC.
This patch disables support for the bluez-utils package on the avr32
architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
kexec does not support the avr32 architecture; this results in autobuilder
failures such as the following.
http://autobuild.buildroot.net/results/5f5e91c3eb622bce88402a9afc8a3e7bd5007136/build-end.log
This patch disables support for the kexec package on the avr32 architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The perlcross project makes it possible to properly cross-compile
perl. It creates a host-miniperl that is configured for the target
and uses that to cross-compile the perl modules.
Unfortunately there are still a few hacks needed to make it work.
Proper fixes can be developed and upstreamed later.
Since there is no longer a dependency on qemu, it works on all
architectures again.
Also removed some config options:
- BR2_PACKAGE_PERL_CUSTOM_INSTALL just allows a selection of modules;
this can also be encoded by an empty BR2_PACKAGE_PERL_MODULES.
- BR2_PACKAGE_PERL_DB_FILE and BR2_PACKAGE_PERL_GDBM_FILE can be
derived automatically from the package configs.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
xlib_libX11 builds a makekeys executable for the host, but uses the
targets X11_CFLAGS. This leads to build failures like
http://autobuild.buildroot.net/results/411eb3aefea859a7e31986a44acd50b475f174cb/
This problem was introduced by the version bump, because then also
the AUTORECONF was removed so the existing fix didn't work anymore.
As a slightly cleaner solution, just remove X11_CFLAGS from the
Makefile. We know we don't need it, because the X11 stuff is in
$(HOST_DIR)/usr/include which is already in HOST_CFLAGS.
[Peter: reword comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Give the path to the realdelf binary for the target, similar to how we
do for the other tools.
[Peter: reworded]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This release contains many improvements bug fixes, and major new features and
support for float point numbers and support for multi-telegram communication...
[Peter: also drop autoreconf]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Contrary to what was written in samba.mk, the sys-quotas option
apparently does not depend on RPC support in the toolchain: Samba
builds perfectly fine on an uClibc toolchain without RPC support with
sys-quotas enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we're using full perl (which needs qemu), only make auto{conf,make}
available on the supported archs.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build error message is:
glib-2.12 required to compile QEMU
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build error message is:
Error: zlib check failed
Make sure to have the zlib libs and headers installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes
http://autobuild.buildroot.org/results/ccb7d6da503a81015275ff1e4ba9a564203932ec/build-end.log
Even though the build failure happens on host-qemu, adding
host-pkgconf to QEMU_DEPENDENCIES seems like the right thing to do
since that this dependency will also be needed for the target qemu
once it gets included.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently packages can be described in two ways: proprietary (tarball not
saved, license not described in further detail), and others (tarball
saved, license described).
Split the logic to allow the license to be always described whether or not
the source code can be redistributed.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix Peter's reported build failure:
http://autobuild.buildroot.net/results/1dcf63799937f2216e3c712af8880ad431dbd47c/build-end.log
This is because the configure script uses absolute paths to detect dbi,
mysql and pgsql, so forcibly disable them.
Also add the optional sqlite dependency when it's selected.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Useful to produce extra warnings for packages that have special
licensing-related issues.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem has to do with const-correctness. This has been resolved
for various architectures, but not for the generic case.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cups uses /usr/lib64 if the HOST has it, no matter if it is cross compiling
for a 32bit arch, breaking the build for stuff looking in /usr/lib.
The fix of commit edd2716c didn't work, it would just force /usr/lib64 if
the target is 64 bit. Instead, force installation in /usr/lib regardless
of the host.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Graphics can be enabled for X11 as well.
Do not select DirectFB for graphics,
set DirectFB or X11 dependencies instead.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix a build issue similar to the one encountered on xapp_listres at
http://autobuild.buildroot.org/results/06d0ef38165769df38047c1f64d4cfae835e9e54/.
Note that this new version requires a minor cross-compilation fix in
configure.ac, which has already been committed upstream but is not yet
part of a release tarball.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is no longer being developed, the FTP is dead, and Debian has
removed it from the distribution.
Also it allows to not worry about adding RPC support through libtirpc
to this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of making the Busybox configuration more complicated by trying
to adjust it depending on whether RPC is available or not (which gets
complicated when RPC support can be provided by libtirpc), simplify
things by letting the user enable FEATURE_NFS_MOUNT or not depending
on whether RPC support is available or not.
Our default configuration do not enable FEATURE_NFS_MOUNT, so users
will not face any build problems by default. Only if they explicitly
enable FEATURE_NFS_MOUNT will they have to make sure that the
toolchain has RPC support, or that libtirpc is enabled (support for
this added in a followup patch).
[Peter: remove from CONFIGURE_CMDS as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libhid uses timerfd, which is not yet available in the uClibc-0.9.31
that we have to rely on for avr32. Since this is pretty much a corner
case, just disable libhid for avr32.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When downloading from git, we clone the whole repository and then only
use the latest commit. That's a lot of redundant stuff. So instead,
make a shallow clone. Unfortunately that's only possible when
downloading a branch or tag, so fall back to the old method if git gives
an error.
This speeds up the cloning of a linux git from more than 2 hours to
20 minutes on a 200KB/s link).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: adjust for BR changes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The avr32linux.org mirror has vanished and is replaced by a spam site
that returns HTML pages for whatever URL you request from it. So the
download helper thinks that download has succeeded, while actually it
failed.
Fortunately, there is still a mirror of the site alive, so we can use
that one.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The busybox web server isn't providing the same binary name / cmdline
arguments as the "big" webservers, so they aren't equivalent.
As discussed on the dev day, don't hide them when _SHOW_OTHERS isn't
enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
allows same behaviour (and footprint) as microperl
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
only user mode for the current target architecture
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/b2f28621bc9d6048057c406048b3f7d665cef165
ipnetns.c contains a replacement setns implementation, which is used
if the toolchain doesn't provide any (HAVE_SETNS not set).
We don't have any knowledge of toolchain setns support on buildroot
level, but the (handwritten) configure script contains a test for it,
so run the configure script before building.
The configure script isn't written for cross compilation, so it needs
to be massaged slightly to use the cross compiler / flags.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes security issues:
- CVE-2012-3524: Don't access environment variables (fd.o #52202)
Thanks to work and input from Colin Walters, Simon McVittie,
Geoffrey Thomas, and others.
- Be more careful about monotonic time vs. real time, fixing
DBUS_COOKIE_SHA1 spec-compliance (fd.o #48580, David Zeuthen)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes the autobuilder bug that shows up during the
libmbus build.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fluxbox uses xmodmap in its startup script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
strace fails to build on x86_64 because stat64 is not available. This
is because the automatic detection of stat64 in configure is overridden
by buildroot, by setting ac_cv_type_stat64. Just remove that override -
current strace seems to detect it correctly for non-largefile platforms.
Build-tested on x86_64 (with largefile), ARM (with and without largefile),
sh4, MIPS and ppc-32 (no largefile).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/6dcbf4ca3fcc5ec911ac7a1680f7cb381fd18fcb
qtuio appends _d to the library name when Qt was built with debug support,
breaking linking step for examples and staging/target install.
There's no real advantage to the _d suffix, so simply fix it by removing
the logic appending _d.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script tries to autodetect kerberos 5 support and seems to
fail under some circumnstances.
Just disable it since we don't have kerberos support in buildroot.
Fixes:
http://autobuild.buildroot.net/results/c9e590a1034c3869cb7391984ce8281ec4c3ef9c/build-end.log
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer need to specify PKG_CONFIG_PATH since it's handled by the
host-pkgconf wrapper.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove host-pkg-config in favour of host-pkgconf.
Also remove the sysroot support patch since it's only intended for the
host variant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
pkgconf is a drop-in replacement for pkg-config that doesn't need
itself to build and just requires a C89 compiler.
Instead of using a patch for hardcoded sysroot support (as the patch to
pkg-config does) we rely instead on a wrapper script that takes the
appropiate action.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
binutils version 2.23 is only available in .gz format, the older versions are in .bz2 format.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Problem was found when compiling libplayer with GStreamer support
on x86_64 with a Sourcery toolchain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Implementation of an interface connecting TUIO messages and QT events
https://github.com/x29a/qTUIO
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
build-tested with a minimal internal toolchain for ARM.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop uneeded configure args, full install to target]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the "Unknown parameter for tags/attrs" build error.
Backported from commit 88e08c43d0200a4b06a298b7d2541965eebc0afe
[PATCH] 2011-04-17 Thierry Reding
<thierry.reding@avionic-design.de>
Reviewed by Adam Barth.
Fix build with GCC 4.6.
* dom/make_names.pl: Execute preprocessor without the -P option. The
preprocessor in GCC 4.6 eats empty lines, effectively breaking the
parsing performed by this script. Dropping the -P option when invoking
the preprocessor keeps the empty lines but as a side-effect also adds
additional linemarkers.
From the cpp manpage:
-P Inhibit generation of linemarkers in the output from the
preprocessor. This might be useful when running the preprocessor
on something that is not C code, and will be sent to a program
which might be confused by the linemarkers.
The linemarkers are not problematic, however, because the script
properly handles them by ignoring all lines starting with a #.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
