host-autoconf-archive was added to libgpiod in commit
8df6ae3127 because of a patch to
configure.ac.
It is not needed by libgpiod2 as there is no patch since the addition
of the package in commit 57391fad2e
Fixes: 57391fad2e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- With uClibc-ng-1.0.48 we can restore this defconfig because uClibc-ng
now provides the fix for SPARC.
- The instructions in board/qemu/sparc-ss10/readme.txt are still valid
without any corrections. The system boots properly ang the login
prompt appears.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix following uclibc build failure raised since bump to version 4.3 in
commit 99e9ff08d0 and
https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git/commit/?id=577fd10486d8d1472a6b559066f344ac30a3a391:
Create.c: In function 'write_zeroes_fork':
Create.c:155:35: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
155 | if (fallocate(fd, FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE,
| ^~~~~~~~~~~~~~~~~~~~
as well as the following musl build failure:
util.c: In function 'get_md_name':
util.c:1031:29: error: 'NAME_MAX' undeclared (first use in this function); did you mean 'MD_NAME_MAX'?
1031 | static char devname[NAME_MAX];
| ^~~~~~~~
| MD_NAME_MAX
util.c:1031:29: note: each undeclared identifier is reported only once for each function it appears in
/home/buildroot/instance-0/output-1/host/bin/x86_64-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -DNO_LIBUDEV -DSendmail=\""/usr/sbin/sendmail -t"\" -DCONFFILE=\"/etc/mdadm.conf\" -DCONFFILE2=\"/etc/mdadm/mdadm.conf\" -DMAP_DIR=\"/run/mdadm\" -DMAP_FILE=\"map\" -DMDMON_DIR=\"/run/mdadm\" -DFAILED_SLOTS_DIR=\"/run/mdadm/failed-slots\" -DNO_COROSYNC -DNO_DLM -DUSE_PTHREADS -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DBINDIR=\"/sbin\" -o Monitor.o -c Monitor.c
/home/buildroot/instance-0/output-1/host/bin/x86_64-linux-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -DNO_LIBUDEV -DSendmail=\""/usr/sbin/sendmail -t"\" -DCONFFILE=\"/etc/mdadm.conf\" -DCONFFILE2=\"/etc/mdadm/mdadm.conf\" -DMAP_DIR=\"/run/mdadm\" -DMAP_FILE=\"map\" -DMDMON_DIR=\"/run/mdadm\" -DFAILED_SLOTS_DIR=\"/run/mdadm/failed-slots\" -DNO_COROSYNC -DNO_DLM -DUSE_PTHREADS -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -DBINDIR=\"/sbin\" -o dlink.o -c dlink.c
Create.c: In function 'write_zeroes_fork':
Create.c:155:35: error: 'FALLOC_FL_ZERO_RANGE' undeclared (first use in this function)
155 | if (fallocate(fd, FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE,
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 99e9ff08d0
- http://autobuild.buildroot.org/results/0e04bcdb591ca5642053e1f7e31384f06581e989
- http://autobuild.buildroot.org/results/c77ee2615e9d473e93d95c778648c7e897b7f234
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
openocd is not compatible with libgpiod2 resulting in the following
build failure since the addition of libgpiod2 in commit
57391fad2e:
src/jtag/drivers/linuxgpiod.c: In function 'helper_get_line':
src/jtag/drivers/linuxgpiod.c:283:19: error: 'GPIOD_LINE_REQUEST_DIRECTION_INPUT' undeclared (first use in this function); did you mean 'GPIOD_LINE_DIRECTION_INPUT'?
283 | int dir = GPIOD_LINE_REQUEST_DIRECTION_INPUT, flags = 0, val = 0, retval;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| GPIOD_LINE_DIRECTION_INPUT
Fixes: 57391fad2e
- http://autobuild.buildroot.org/results/7195e8b76350f26ab3b963702d88b254512e6928
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following static build failure raised since bump to version
version 6.0.14 in commit ce17f93e82 and
31ba4fd152:
configure:22378: checking for pcap_open_dead in -lpcap
configure:22407: /home/buildroot/autobuild/run/instance-3/output-1/host/bin/x86_64-linux-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -static -std=c11 -march=native -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -static -rdynamic conftest.c -lpcap -ljansson -lpthread -lyaml -lpcre -latomic -lz >&5
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/12.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/run/instance-3/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/lib/../lib64/libpcap.a(pcap-linux.o): in function `nl80211_init':
pcap-linux.c:(.text+0xc34): undefined reference to `nl_socket_alloc'
[...]
checking for pcap_open_dead in -lpcap... no
Fixes: ce17f93e82
- http://autobuild.buildroot.org/results/9e25c2508bd4100d2d1d3180e79060d762361213
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many of Intel based tablets (and all phones that were designed with
Intel SoCs) have Intel AtomISP v2 engine. Add an entry for recently
added firmwares for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Updated WHENCE hash due to various new entries for new blobs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this patch series we again allow building a Buildroot toolchain
for SPARC, because SPARC was fixed in uClibc-ng, so SPARC systems
work fine now.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- The 1.0.48 release of uClibc-ng includes the fix for the SPARC
related issue discussed at
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98784
- The hash for COPYING.LIB was changed because '^L' (0x0C) characters
were removed from COPYING.LIB in uClibc-ng repo.
Signed-off-by: Dmitry Chestnykh <dm.chestnykh@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that the TestPerlDBDmysql can be run normally, a new runtime issue
appear due to switch from oracle-mysql to MariaDB:
# perl -MDBI -e '1'
# echo $?
0
# perl -MDBD::mysql -e '1'
Can't load '/usr/lib/perl5/site_perl/5.38.2/arm-linux/auto/DBD/mysql/mysql.so'
for module DBD::mysql: /usr/lib/perl5/site_perl/5.38.2/arm-linux/auto/DBD/mysql/mysql.so:
undefined symbol: net_buffer_length at /usr/lib/perl5/5.38.2/arm-linux/DynaLoader.pm line 206.
This is fixed by an upstream commit [1] from 4.046_01 release.
[1] 0f0cebe87f
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6735654506
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CPIO filesystem generated by TestPerlDBDmysql is too large, and
doesn't fit as an initramfs in the 256MB of RAM available in the
versatilepb machine. This causes a failure while running a basic
test "perl -MDBI -e '1'" since "/usr/lib/perl5", and many files
being missing from the root filesystem, ultimately causing the test
to fail.
Can't locate DBI.pm in @INC (you may need to install the DBI module)
(@INC entries checked: /usr/lib/perl5/site_perl/5.38.2/arm-linux
/usr/lib/perl5/site_perl/5.38.2 /usr/lib/perl5/5.38.2/arm-linux
/usr/lib/perl5/5.38.2).
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6735654506
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop non-v3 fix patch as this was upstreamed
Signed-off-by: Jesse Van Gavere <jesseevg@gmail.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
linux-pam is an optional dependency which is enbled by default since
bump to version 2.5.0 in commit 0c15169f5a
and
2883dd0710
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add myself to the DEVELOPERS files to help review patches related to
TI's reference boards.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest kernel to pull in the latest bug fixes and features
for TI's SoCs and reference boards
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to the latest kernel to pull in the latest bug fixes and features
for TI's SoCs and reference boards
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the TFA firmware to the latest LTS tag for v2.10 release of
arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the TFA firmware to the latest LTS tag for v2.10 release of
arm-trusted-firmware
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 09.02.00.009 release of ti-linux-firmware has the latest updates to
TI's TIFS, DM and DMSC firmware needed for the K3 generation of
processors. Update to pull in these latest updates.
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ti-k3-r5-loader is just U-Boot with a different defconfig compiled
for the 32b MCU cores needed for TI's K3 generation of SoCs. Update to
match the U-Boot version
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PIE will be set by buildroot if the user wants it so set
{COMPILE,LINK}_PIE to an empty value to fix the following build failure
raised since the addition of the package in commit
02c818bc5c:
/home/buildroot/autobuild/run/instance-3/output-1/host/bin/m68k-linux-gcc -W -Wall -Waggregate-return -Wcast-align -Wconversion -Wdisabled-optimization -Wmissing-declarations -Wmissing-format-attribute -Wmissing-noreturn -Wmissing-prototypes -Wpointer-arith -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g0 -std=gnu99 -DLIBEXECDIR=\"/usr/lib\" -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wl,-z,relro -Wl,-stats -fPIE -pie -Wl,-z,now utempter.c -o utempter
[...]
/home/buildroot/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/12.3.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/run/instance-3/output-1/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/Scrt1.o: in function `lib_main':
(.text+0x4): undefined reference to `__shared_flat_add_library'
Fixes: 02c818bc5c
- http://autobuild.buildroot.org/results/3a5581fd4edf56bbdc48ab111a2351fc70f1c703
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds basic support for the new OrangePi Zero2W board:
- http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-2W.html
Brief summary of the board features:
- H618 Allwinner SoC
- Quad-Core ARM Cortex-A53 Processor 1.5GHz
- Mali G31 MP2 GPU
- LPDDR4: 1GB/2GB/4GB
- Wi-Fi5.0+BT 5.0
- 2x Type-C USB 2.0
- 1x Mini HDMI
- Wi-Fi 5.0 + BT 5.0
- 40-pin expansion interface (GPIO / UART / I2C / SPI / PWM)
- 24-pin expansion interface (2x USB 2.0 / ETH / IR / audio)
BSP includes the following components:
- mainline ATF v2.10
- mainline U-Boot v2024.04
- mainline Linux kernel v6.8
No custom scripts required: all is covered by common orangepi scripts.
However new option BR2_DOWNLOAD_FORCE_CHECK_HASHES requires checksums
for all the BSP components. They are added as board specific patches.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sframe library was added by binutils 2.40 and
19e559f1c9
resulting in the following static build failure:
/home/buildroot/autobuild/run/instance-1/output-1/build/binutils-2.41/bfd/elf-sframe.c:220: undefined reference to `sframe_decode'
[...]
configure: error: bfd library not found
Fixes:
- http://autobuild.buildroot.org/results/a9f3e09e6543b3773440c011e93bd41e357691e4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Generated by utils/add-custom-hashes, with the (redundant)
linux-headers.hash replaced by a symlink.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6761770801
The Linux kernel fails to build since commit e88225ed88 (package/binutils:
make 2.41 the default version):
arch/arm/mm/proc-feroceon.S: Assembler messages:
arch/arm/mm/proc-feroceon.S:587: Error: junk at end of line, first unrecognized character is `#'
make[3]: *** [scripts/Makefile.build:430: arch/arm/mm/proc-feroceon.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Fix the build by bumping the kernel to 4.14.336, which includes commit
3ab03df64f77 (ARM: 8933/1: replace Sun/Solaris style flag on section
directive):
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-4.14.y&id=3ab03df64f7754728a2257c47775a70a88428331
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following build failure with kernel < 4.7 raised since bump to
version 2.5.0 in commit 0c15169f5a and
81ad945630:
sys-linux.c: In function 'get_ppp_stats_rtnetlink':
sys-linux.c:1783:29: error: field 'ifsm' has incomplete type
1783 | struct if_stats_msg ifsm;
| ^~~~
Fixes:
- http://autobuild.buildroot.org/results/82392df447f650f241f23e59e65131fb4a930010
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NLS is an optional dependency since the addition of the package in
commit f78c5cb5ca:
/home/autobuild/autobuild/instance-0/output-1/host/lib/gcc/arm-buildroot-linux-musleabi/12.3.0/../../../../arm-buildroot-linux-musleabi/bin/ld: ../lib/.libs/libshadow.a(libshadow_la-alloc.o): in function `xcalloc':
alloc.c:(.text+0x7c): undefined reference to `libintl_gettext'
Fixes: f78c5cb5ca
- http://autobuild.buildroot.org/results/9f604d09745ffa1f4db3bdcfe0326c236effac0c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/x11r7/Config.in:14: syntax error
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '/'
package/x11r7/Config.in:14:warning: ignoring unsupported character '.'
package/x11r7/Config.in:14: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/python-pydal/Config.in:2: syntax error
package/python-pydal/Config.in:2: invalid statement
package/python-pydal/Config.in:3: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/dovecot/Config.in:36: syntax error
package/dovecot/Config.in:36:warning: ignoring unsupported character '/'
package/dovecot/Config.in:36:warning: ignoring unsupported character '/'
package/dovecot/Config.in:36:warning: ignoring unsupported character '.'
package/dovecot/Config.in:36: invalid statement
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
package/cmocka/Config.in:2: syntax error
package/cmocka/Config.in:2: invalid statement
package/cmocka/Config.in:3: invalid statement
package/cmocka/Config.in:4: invalid statement
[...]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following error/warnings with kconfig from linux-6.9-rc5:
boot/barebox/Config.in:79: syntax error
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '/'
boot/barebox/Config.in:79:warning: ignoring unsupported character '.'
boot/barebox/Config.in:79: invalid statement
boot/barebox/Config.in:93: syntax error
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '/'
boot/barebox/Config.in:93:warning: ignoring unsupported character '.'
boot/barebox/Config.in:93: invalid statement
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And enable BR2_DOWNLOAD_FORCE_CHECK_HASHES.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
