The existing Microblaze toolchains that we have have the annoying
property of being based on a very old glibc version: 2.3.6. Xilinx
provides newer toolchains with glibc 2.14, generated by Crosstool-NG,
but they are only available as part of a huge Git repository that
contains the gcc, Linux, binutils, glibc sources unpacked (4.4 GB
total), which makes is very unpractical.
I contacted the Xilinx person who did those toolchains, but they
apparently didn't intend to change that anytime soon.
So, we have created a tarball for those toolchains, adding a
README.txt file in the tarball that points back to the original
location that contains the source code for them. Those tarballs are
hosted on sources.buildroot.net.
This commit then adds support for those two new external toolchains,
one for little endian Microblaze, another one for big endian
Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Against all odds, vtun had a new release sometime last year.
Still, the code needs patching:
- the existing patch to fix installation has been refreshed
- the existing patch to fix blowfish header location has been
replaced (see below)
- configure looks in hard-coded, host paths (eg. /usr/include)
without any consideration for scross-compilation
--> new patch
- configure.in does not even pass an autoreconf without a
bit of love first (it's written in an ancient dialect that
autoreconf does no longer recognise)
--> new patch
Remove obsolete, unused, bit-rotting scripts and warning.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The dependency on zlib is correctly expresed in vtun.mk,
but was missing from the Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using the --with-icu option without specifying the directory, boost's
bootstrap.sh script will look at "common" locations (lines 289-294):
COMMON_ICU_PATHS="/usr /usr/local /sw"
for p in $COMMON_ICU_PATHS; do
if test -r $p/include/unicode/utypes.h; then
ICU_ROOT=$p
fi
done
With buildroot it may surely become problematic at some point.
Signed-off-by: Ignacy Gawędzki <i@lri.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgpg-error installs a gpg-error-config script, but it wasn't fixed
up properly. Use the <pkg>_CONFIG_SCRIPTS to handle this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The packages changed by this commit were not only changing prefix= and
exec_prefix= during their <foo>-config fixups, they were also changing
includedir= and/or libdir=. So, they could not be directly converted
to the new <pkg>_CONFIG_SCRIPTS infrastructure.
However, a careful analysis of their default <foo>-config shows that
includedir= and libdir= is defined relatively to either ${prefix} and
${exec_prefix}. Therefore, the manual fixing of includedir= and
libdir= is useless, and fixing prefix= and exec_prefix=, as done by
the <pkg>_CONFIG_SCRIPTS mechanism is sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism in all packages for which it
does all what the package was doing. A few packages, like libxslt, are
for now left out, since they need some additional fixup (for example a
fixup of includedir).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The <foo>-config scripts are useless on the target, since they are
only needed for development, so we remove them automatically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit renames the newly introduced <pkg>_CONFIG_FIXUP variable
to <pkg>_CONFIG_SCRIPTS, for two reasons:
* <pkg>_CONFIG_SCRIPTS will not only "fixup" the scripts in
$(STAGING_DIR)/usr/bin, but also remove them from
$(TARGET_DIR)/usr/bin. So it is not only about doing a "fixup".
* On the principle, it is strange that the variable carries an
indication of the action that will take place on those files. It
should rather be named to say "Here are the <foo>-config scripts",
and let the package infrastructure decide if it should fix them up,
remove them, etc.
This commit also updates the documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes it possible to put empty directories in the overlay.
Thanks to Aras Vaichas for pointing that out.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the post-image config option uses the plural for "Custom
scripts", do the same for the post-build config option, for
consistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The order of the solutions to customize the root filesystem is
changed: we now mention the post-build script mechanism *before* the
custom root filesystem skeleton mechanism, because the former is
preferred over the latter.
In addition to this, we give a few more details about direct
customization of the root filesystem in output/target, and about the
custom target skeleton solution.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This mechanism of root filesystem customization has been deprecated
since a long time, so let's remove it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix minor typos]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we have a post-build script mechanism that gets executed
after the build of all packages but before the creation of the
filesystem images, let's introduce a post-image script mechanism, that
gets executed once all filesystem images have been generated.
This can for example be used to call a tool building a firmware image
from different images generated by Buildroot, or automatically extract
the tarball root filesystem image into some location exported by NFS,
or any other custom action.
[Peter: fix image script check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Kconfig does not accepts that a symbol that is part of a choice
be affected a default value.
Fix this by introducing a dummy EABI symbol, and make the real
EABI symbol a prompt-less option that depends on !OABI.
[Peter: drop arm dependency, rename to EABI_CHOICE]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.org/results/e184fcb1c100e9d8aa3d9f18a8caee8c0839e207
Contrary to what the .mk file states, proxychains-ng doesn't use autotools.
Instead it uses a handwritten configure script, so convert it to
generic-package.
This handwritten configure script generates config.mak which is then
included by the Makefile. Unfortunately config.mak does:
CC ?= $(TARGET_CC)
But as make sets CC to 'cc' by default, this never does anything - So
it ends up using the host compiler (and target CFLAGS), breaking the build.
Fix it by passing the correct CC setting at build time as well.
While we're at it, also cleanup the package by using 'make install-config'
to install the configuration file.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update {ea3250,fdi3250,phy3250}_defconfig to lock down kernel headers to
an appropiate version.
Otherwise the target is building with, at the moment of this writing,
version 3.7 headers and a 2.6.34 kernel which usually isn't wise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_ARM_EABI config symbol is still kept in order to minimize
the impact.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The manual linux headers option may specify versions other than the 2.6
series, so drop the "2.6"
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
