Linux version are changed to 4.19.16 (LTS) for all qemu defconfigs,
except for riscv. riscv defconfigs are left unchanged because they have
a custom Linux repository causing more difficulties when upgrading to
4.19 for riscv32. And for the riscv64, it has been updated recently to
Linux 4.20 by another contributor.
Patch for arm-versatile-nommu is changed into a git format
Add cache attributes for xtensa-lx60-nommu config because the commit
7bb516ca54
added a new config variable for memory cache attribute:
CONFIG_MEMMAP_CACHEATTR
All these updated configs have been built successfully.
Signed-off-by: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build currently fails with:
*** dtoc needs the Python libfdt library. Either
*** install it on your system, or try:
***
*** sudo apt-get install swig libpython-dev
***
*** to have U-Boot build its own version.
Adding BR2_TARGET_UBOOT_NEEDS_PYLIBFDT should fix this build issue,
which was reported at:
https://gitlab.com/buildroot.org/buildroot/-/jobs/158295223
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contrary to what the comment in the defconfig says, the
orangepi_lite2_defconfig was not using the "same as kernel" option for
kernel headers, but really selecting explicitly Linux 4.18 headers,
independently from the kernel version.
Except that in the mean time, BR2_KERNEL_HEADERS_4_18 has been
removed, causing a build failure due to the legacy checking:
Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop.
This commit fixes that by using the proper
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18 option.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/158295163
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configuration contains:
- building tpl, spl and u-boot (forked u-boot repository)
- booting from SD card and network via PXE
- working ethernet, usb and uart
- minimal rootfs with busybox
- ready to flash SD card image
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since all EFI-based systems support GPT, this commit changes
pc_x86_64_efi to use a GPT partition table. It shows an example of how
to craft a disk image with GPT partitioning instead of MBR. This is
achieved by means of a post-image script which uses
mkdosfs+mcopy+sfdisk, since genimage is unable to deal with GPT. Long
term, it would be ideal if genimage had GPT support, but until then,
this script shows how to achieve creating a GPT-based disk image.
The script was kept as simple as possible to make it easy to understand
and adapt for other purposes.
The root filesystem location is passed to the kernel by a partition
UUID, so it is possible to boot on QEMU, directly from the disk image,
or dump the image to a physical device.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the kernel is built by Buildroot BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_X_YY
must be used and not BR2_KERNEL_HEADERS_X_YY.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu_aarch64_virt_defconfig (implicitly) specifies cortex-a53, so adjust the
QEMU command line to also emulate a a53 instead of a57.
Also adjust the defconfig to explicitly specify a53 for consistency/clarity.
Signed-off-by: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since riscv64 works with linux default defconfig, this patch drop custom config.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Tested-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables a riscv32 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This requires a custom version of glibc 2.26 from the riscv-glibc
repository. Note that there are no tags in this repository, so the
glibc version just consists of the 40 character commit id string.
Thanks to Fabrice Bellard for pointing me towards the 32-bit glibc
repository and for providing the necessary patch to get it to build.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to version 4.14.91 and U-Boot to version 2018.11.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot and kernel to their latest releases.
Remove the documented limitations. Recent kernels added support for the
SOM SPI flash, and the carrier SFP port.
Mention the 'dd' command in the warning text. No script is involved.
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before this commit, the grub configuration file was copied to the
TARGET_DIR in a post-image hook, after the filesystem has been
generated. It was kinda working because the board/pc's grub
configuration and the default one are the same and the later was
copied during the build process of the grub2 package.
This commit ensures the custom board/pc grub configuration is copied at
the right time.
Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This updates LEGO MINDSTORMS EV3 to Linux kernel 4.19 and U-Boot
2018.11. This kernel brings Bluetooth support, so some Bluez packages
are also added. Also, we now have proper device tree support, so a few
things are rearranged in the flash and SD card images since the DTB is
no longer appended to the kernel image.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP U-Boot tree has the following build issue:
MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx7dsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
make[2]: *** [u-boot-dtb.imx] Error 1
Makefile:877: recipe for target 'u-boot-dtb.imx' failed
This issue has been fixed by commit f916757300c1 ("imx: Create
distinct pre-processed mkimage config files"), so backport this
commit to the NXP U-Boot tree in order to fix the build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/136980027
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot 2017.11 has the following build issue:
MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx6slevk/imximage.cfg.cfgtmp
arch/arm/mach-imx/Makefile:86: recipe for target 'u-boot-dtb.imx' failed
make[2]: *** [u-boot-dtb.imx] Error 1
Makefile:907: recipe for target 'u-boot-dtb.imx' failed
make[1]: *** [u-boot-dtb.imx] Error 2
make[1]: *** Waiting for unfinished jobs....
This issue has been fixed by commit f916757300c1 ("imx: Create
distinct pre-processed mkimage config files"), which landed in
U-Boot 2018.05.
Bump the U-Boot version to fix this build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/136980040
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the csky custom external toolchain to fix a broken
host dependency of gdb on libexpat.so.0 (most hosts now ship
libexpat.so.1). gdb is required to copy and and boot the kernel (see
board/csky/readme.txt). The updated gdb no longer has this host
dependency, which solves the issue.
Since this external toolchain was built and tested with csky kernel
4.9.56, this patch also updates to that kernel version.
Finally, this 4.9.56 csky kernel changed its default bootargs. So we
add a patch to preserve the same behavior as the previous version.
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Orangepi lite2 board has AP6356S WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add broadcom wireless firmware package to image
- add basic wireless tools to image
- add rootfs overlay with proper NVRAM file for on-board AP6356S chip
- add mdev to image to enable module autoloading
- update readme.txt to test wifi
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Lite2 board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi One Plus board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, U-Boot is failing to build, due to some issues
with the toolchain and the U-Boot port.
Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel, U-Boot and ATF packages to the NXP imx_4.14.62_1.0.0_beta
release.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Using default value (console) works well, so there is no reason to set
tty explicitly.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using default value (console) works well, so there is no reason to set
tty explicitly. Additionally after selecting newer kernels (tested
with 4.19 and 4.20-rc3) ttyO0 no longer works due to missing device
node.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 9f5b07fc64 ("configs: nexbox_a95x_defconfig: bump to
kernel 4.19.8"), the nexbox_a95x_defconfig needs host-openssl to build
the Linux kernel.
Fixes: https://gitlab.com/ymorin/buildroot/-/jobs/131924236
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel builds fails with:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
Because it needs host-openssl.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/131216892
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bananapi_m2_plus defconfig uses a 4.18 kernel, but doesn't specify
anything for the kernel headers version, so the Buildroot default gets
used, which currently is 4.19. Since 4.19 is newer than 4.18,
Buildroot rightfully whines:
Incorrect selection of kernel headers: expected 4.19.x, got 4.18.x
Let's fix this by telling this defconfig to use the headers from the
kernel, and that they are of version 4.18.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/131216938
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New generic defconfig for aarch64, to run on aarch64 servers compliant
with EFI firmware and ACPI.
This can also be tested with qemu, and is useful so that we have an
arm defconfig with grub enabled. Tested with qemu 2.11.2 and AAVMF,
the aarch64 virtual machine UEFI firmware.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas: extend readme.txt with more details]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
ondemand cpufreq govenor so the frequency is dynamically adjusted - So
enable it in linux-extra.config.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
driver for the sy8106a regulator used on the board or enable the ondemand
cpufreq govenor so the frequency is dynamically adjusted - So enable these in
linux.fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building U-Boot for this platform:
unable to execute 'swig': No such file or directory
error: command 'swig' failed with exit status 1
scripts/dtc/pylibfdt/Makefile:26: recipe for target 'scripts/dtc/pylibfdt/_libfdt.so' failed
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771103
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The old 3.4 Linux kernel used by this defconfig doesn't build with gcc 7.x:
include/linux/compiler-gcc.h:106:1: fatal error: linux/compiler-gcc7.h: No such file or directory
So let's use gcc 6.x for the time being.
Long term, we should use a newer or different kernel source for this
defconfig, or get rid of the defconfig entirely if there's no updated
kernel with a fix.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771091
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-Boot part of the defconfig was not specifying explicitly any
U-Boot version. Since commit 21e3ae8a18
("boot/uboot: default to kconfig buildsystem for latest version"), we
default to using the kconfig build system when the default U-Boot
version is used. Following this change, the apf27 defconfig therefore
started using kconfig, for which the BR2_TARGET_UBOOT_BOARDNAME
Config.in option is not used. Due to this, the build fails with:
boot/uboot/uboot.mk:411: *** No board defconfig name specified, check your BR2_TARGET_UBOOT_BOARD_DEFCONFIG setting. Stop.
Indeed, when Kconfig is used, the board defconfig must be specified
with BR2_TARGET_UBOOT_BOARD_DEFCONFIG.
As part of fixing this, we also set a fixed U-Boot version for this
defconfig, like we do in all other defconfigs.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771003
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building U-Boot for this platform:
unable to execute 'swig': No such file or directory
error: command 'swig' failed with exit status 1
scripts/dtc/pylibfdt/Makefile:27: recipe for target 'scripts/dtc/pylibfdt/_libfdt.so' failed
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771048
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-openssl is needed to build the Linux kernel. This is the same
issue that was fixed in commit
5dac3b9b8d ("configs/imx6-sabresd: needs
host-openssl for the Linux kernel build") for the minimal defconfig
for the same board.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771070
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2018.11. This version supports autodetection of
SD/eMMC boot source, so we can now enable environment load from SD card.
Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save
device. This avoids stale environment values from the SPI flash. That in
turn, allows to use the more convenient distro boot which is enabled in
the default environment.
Bump kernel to version 4.19.2. This version enables
CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from
the kernel kconfig fragment. Enable support for SFP modules detection
and configuration. Leave the PHY drivers for now to keep them built into
the kernel. The kernel defconfig builds these drivers as modules. But
that does not work as expected in the default configuration.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- sunxi mali mainline
- sunxi tools
like in olimex_a20_olinuxino_lime_legacy.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
