Bernhard Reutner-Fischer
8564ba689d
- andersee, why was this duplicated and hardcoded here?
2007-01-15 17:34:58 +00:00
Bernhard Reutner-Fischer
82b3f197b0
- move setting the TARGET_DEVICE_DEPMOD up one level
2006-12-22 10:39:56 +00:00
Bernhard Reutner-Fischer
b6397015e4
- copy the final kernel (and System.map) to boot/
2006-12-18 14:10:46 +00:00
Bernhard Reutner-Fischer
fb1e7915e9
- stripped a bit too much for kernel-headers == target-kernel. Reinstate required rules.
2006-12-18 13:48:02 +00:00
Bernhard Reutner-Fischer
93af6cb26b
- put the full kernel's sources into build_/, install them into toolchain_build_. Saves quite some disk-space on the compile-host.
...
- Avoid overriding the linux26 target's rules if the kernel headers's and the target's kernel are the same. Avoids a warning.
2006-12-18 13:30:05 +00:00
Bernhard Reutner-Fischer
b3d0f31bdc
- make sure to agree on the installation CONFIG_PREFIX
2006-12-13 22:51:37 +00:00
Bernhard Reutner-Fischer
189ccbaf52
- remove BR2_PACKAGE_BUSYBOX_CONFIG from here since we already have a default for it in busybox/Config.in
2006-12-13 20:26:27 +00:00
Eric Andersen
6e2b255ad8
make this target current
2006-12-13 12:18:08 +00:00
Eric Andersen
0ac8b4c298
use the correct depmod for linux26
2006-12-13 11:59:53 +00:00
Eric Andersen
09d614de28
rename
2006-12-13 11:57:14 +00:00
Eric Andersen
1b7058694e
endianness is handled elsewhere
2006-12-13 11:53:38 +00:00
Eric Andersen
d699758c45
rework the default x86 target
2006-12-13 11:53:00 +00:00
Eric Andersen
162a23c220
update busybox defaults a bit
2006-12-13 09:14:10 +00:00
Eric Andersen
5eeac710ca
update uClibc config settings and update installation of kernel headers
2006-12-12 07:10:54 +00:00
Bernhard Reutner-Fischer
f7da61daa3
- +x
2006-12-04 13:39:50 +00:00
Bernhard Reutner-Fischer
f2e4ecf1d8
- add generic target. X86 for now, don't fork this but generalize it!
2006-12-02 19:34:17 +00:00
Bernhard Reutner-Fischer
6e2823c1fa
- add and use BR2_BZCAT config option.
2006-11-17 15:43:51 +00:00
Eric Andersen
ba70f94e62
subversion makes it so we do not need a separate tarball
...
to store empty directories and symlinks for the target_skeleton.
2006-11-15 06:52:00 +00:00
Eric Andersen
93c38651bd
update config files
2006-10-17 16:57:49 +00:00
Bernhard Reutner-Fischer
6342c83201
- use $(ZCAT) as configured by the user instead of hardcoded 'zcat' that may not exist; Closes #971
...
Silly, unchecked sed -i -e "/[^b]zcat/s/zcat/\$\(ZCAT\)/g" $(svngrep "[^b]zcat" * -rl | grep -v Config.in)
2006-10-01 15:17:52 +00:00
Bernhard Reutner-Fischer
c3c100b63f
- list defaults for BR2_GNU_TARGET_SUFFIX in help text
...
- fix a few typos
2006-07-04 11:44:32 +00:00
Eric Andersen
e8609e8ea7
Disable UCLIBC_HAS_GNU_GLOB, since gnu glob is a horrible bloated monster
...
and should NOT be enabled by default.
2006-07-04 11:06:43 +00:00
Eric Andersen
5787443321
sync target kernel version with reality
2006-06-23 16:43:52 +00:00
Eric Andersen
610595feca
fix url
2006-06-23 16:32:47 +00:00
Eric Andersen
b6ea2bdd2f
update config a bit
2006-06-23 07:45:00 +00:00
Eric Andersen
179d9671c0
version bump
2006-06-23 07:06:48 +00:00
Peter Korsgaard
027add8c56
Update squashfs patch to v3.0 (2.4.28 kernel)
...
Untested as I don't have the hw, but the patch applies cleanly.
2006-05-24 18:26:46 +00:00
Eric Andersen
f56a19707d
Fix missing /etc/mtab symlink
2006-04-14 19:57:28 +00:00
Eric Andersen
55d713a4ec
Make symlink targets use relative paths per bug 303
2006-04-14 19:10:24 +00:00
Eric Andersen
a85a7cfaf7
doh
2006-04-12 00:44:57 +00:00
Eric Andersen
8cf5026c6a
dont use depmod.pl, use cross depmod which I made work properly a while back.
...
Apply latest stable kernel patch
2006-04-12 00:33:42 +00:00
Eric Andersen
bfcb34c69f
accomodate a read only rootfs
2006-04-10 21:26:27 +00:00
Eric Andersen
ba46d4d7ca
update to linux 2.4.16 and current uClibc.
2006-03-25 19:09:09 +00:00
David Anders
88671dd358
add linux-2.4.32 kernel support for the q5 board per case 0000715
2006-02-10 18:00:56 +00:00
David Anders
3d8aa36b65
add the amd au1500 based q5 board per case 0000374
2006-01-25 14:59:21 +00:00
David Anders
59e9a3c8b8
added the soekris net4801 target per case 0000613
2006-01-23 20:13:15 +00:00
David Anders
29f6c535aa
fix kernel build from bug report 0000476
2006-01-20 20:51:48 +00:00
David Anders
5d46a9bb79
add Sharp LH79520 based LNode80 target
2006-01-19 13:51:23 +00:00
Eric Andersen
cf4ab1a045
Well that was stupid. It seems we were carrying about two copies of pre-built
...
binary terminfo stuff, which is supposed to be built by ncurses at compile time.
2005-11-04 16:55:09 +00:00
Eric Andersen
7e133da77d
terminfo stuff is created by ncurses, and should not be installed
...
unless ncurses is installed. It probably need to be byteswapped
for big endian anyway, so using pre-build stuff is bad regardless.
2005-11-04 16:50:28 +00:00
"Steven J. Hill"
4891f7e79d
Fix renaming of UCLIBC_HAS_THREADS_NATIVE option for buildroot.
2005-09-24 19:58:18 +00:00
"Steven J. Hill"
820e4ce7d2
Add new configuration option.
2005-09-12 22:24:35 +00:00
Eric Andersen
d81a10c94f
resync
2005-08-10 10:14:53 +00:00
Eric Andersen
a18f36417b
Only include linux makefile when properly selected
2005-08-01 21:13:40 +00:00
Eric Andersen
bc02c515f2
Via EPIA MII specific Linux config is (surprise) specific to the Via EPIA MII
...
and only should be selectable when BR2_TARGET_VIA_EPIA_MII has first been
selected.
2005-08-01 21:11:06 +00:00
"Steven J. Hill"
1ba78f57e1
Add in options for NPTL in uClibc. Users can select, but since NPTL is
...
on a branch it will not have any effect. Updated DBAu1500 configuration
files for latest uClibc snapshot and NPTL options.
2005-07-29 23:28:31 +00:00
Mike Frysinger
b5ad3a7944
Patrick Doyle writes:
...
target/device/Soekris/net4521/linux.mk is missing an endif for
the first if statement
target/device/Soekris/Makefile.in needs to set TARGETS before
including linux.mk since the file checks the TARGETS variables
2005-07-11 21:53:23 +00:00
Eric Andersen
819e51b309
New target/device: Via epia-mii:
...
Creates a target for the epia-mii board. Fairly generic, based on 2.6 kernel.
Doesn't override the busybox or uclibc configurations. Includes one patch,
which I still can't get to apply (it applies cleanly manually, but isn't
applied through buildroot).
http://bugs.busybox.net/view.php?id=188
2005-06-23 21:34:25 +00:00
Eric Andersen
8365078d61
routine .config update
2005-06-09 12:03:40 +00:00
Paul Mundt
c5564f7b34
Initial support for MS7206SE01 sh2a board.
2005-05-03 13:56:36 +00:00
