When a FOO_SITE variable ends in a slash and gets joined with a
FOO_SOURCE variable like $(FOO_SITE)/$(FOO_SOURCE), the resulting URI
has a double slash. While double-slashes are fine in unix paths, they
are reserved in URIs - the part following '//' must be an authority.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Add Faraday FA526/626 as suggested on bug #1291
Note however that these cores are v4 and NOT v4t.
* Make the sa110 & sa1110 cores -> strongarm since they're the same.
* Drop all of the ARM variants lower than v4 including generic, there's
no point in supporting obsolete targets.
* Fix uClibc USE_BX logic, it was always on, this would break the new
FA526/626 support and broke StrongARM since it's a v4 core.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With 4.8.x released, it makes sense to update our default gcc version
before 4.6.x becomes unmaintained.
At the same time simplify the kconfig logic a bit.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer versions of texinfo (>=5) break the gcc makeinfo routine, so just
disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For each version of gcc, we need to check whether it requires mpc as a
dependency. Since this is true for 4.5, 4.6, 4.7, snapshots and now
4.8, let's factorize this code a bit by using a Kconfig symbol that
tells us whether we are using a gcc version that requires mpc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds support for the recently released gcc 4.8. We re-add
the same patch series as the one used for 4.7.x, after refreshing the
patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gcc snapshots are now located at
ftp://gcc.gnu.org/pub/gcc/snapshots/. This has been tested with a
recent 4.8.0-RC snapshot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the arm processor types: add the cortex A5 & A15 variants.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the powerpc processor types.
Remove the 801, it's the original IBM experimental implementation.
Add the 464, 464fp, 476 and 476fp cores.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed during the ELCE 2012 Buildroot Developers Meeting, we no
longer want to support the possibility of building a toolchain for the
target. None of the core developers have any use for this, it has been
known to be broken or cause problems for a long time without anyone
providing fixes for it.
In addition to this, Buildroot is inherently a cross-compilation tool,
so the usage of a native toolchain on the target is not really
useful. Many newcomers are tempted to use this possibility even though
it is clearly not the intended usage of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having two separate list of choices for select the target
architecture variant for i386 and x86_64, with many CPU choices
duplicated (because all modern x86 CPUs can be both used as i386 or
x86_64), merge them into a single list. In the x86_64 case, all the
x86 CPUs that do not support the 64 bits instruction set are hidden.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Block unsupported processors according to gcc version.
Also remove the comments since we now hide them according to this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump default snapshot gcc version to 4.8-20120429 so that it is newer
than our latest supported version (4.7.0 release).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Re-integrate in gcc-uclibc-4.x.mk things from
toolchain/gcc/Makefile.in that were completely gcc-specific. There was
no reason to pull that when building with other backends than the
internal one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_CONFIGURE_DEVEL_SYSROOT, BR2_CONFIGURE_STAGING_SYSROOT and
BR2_CONFIGURE_BUILD_TOOLS were used only in a few places, and it is in
fact clearer to just use their value in the various places they are
used.
The ultimate goal is to get rid of the toolchain/Makefile.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.7.0 to the toolchain options.
[Peter: drop 0001-toolchain-gcc-add-4.7.x-series.txt]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Has been marked as broken since July 2010 (39e6ba1b), and nobody has
stepped up to support it, so now finally remove it completely.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ability for buildroot to build an SPE ABI enabled toolchain.
This is mandatory for e500v1/v2 cores since they don't support classic
FPU mode as the e500mc does.
Useful for Freescale's PowerQUICC III and single/dual-core QorIQ
line of processors.
The new TARGET_ABI variable is used rather than TARGET_CFLAGS for
uclibc's UCLIBC_EXTRA_CFLAGS to avoid breakish CFLAGS leaking in, a
good example being -mthumb for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 4.3.x series is getting quite old, so let's use 4.5 instead.
There were reports of problems in the past, which is why this is done
early in the cycle.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CONFIG_UPDATE macro is no longer defined in
package/gnuconfig/gnuconfig.mk, but instead in
package/Makefile.autotools.in. It it also changed a little bit to take
the directory of the package sources as argument, and the AUTOTARGETS
infrastructure is updated to use this macro.
[Peter: drop echo in CONFIG_UPDATE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name "patch-kernel.sh" is a bit stupid, since this script is used
to patch everything in Buildroot, not only kernel trees.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
