TestPythonPackageBase.config provide already the basic uClibc toolchain.
So by adding the symbols for the linaro toolchain some warning are printed
at while loading the configuration:
.config:16:warning: override: reassigning to symbol BR2_TOOLCHAIN_EXTERNAL
.config:16:warning: override: BR2_TOOLCHAIN_EXTERNAL changes choice state
.config:17:warning: override: reassigning to symbol BR2_TARGET_ROOTFS_CPIO
.config:21:warning: override: BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM changes choice state
So, some symbol disapear from the generated dot config (.config) leading
to an error due to a new check in the testsuite infra.
Since this test should use the Linaro toolchain, remove
TestPythonPackageBase.config add BR2_arm=y and disable the rootfs tar option.
While at it, re-order the options so that they appear in the same
order as they appear in a defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Adam Duskett <Aduskett@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, the lxc test was using the ARM CodeSourcery 2014.05 armv5 toolchain.
But the recent systemd version bump to 245 added a toolchain dependency
on systemd package due to build issues with gcc < 5.0.
Before [1] the lxc test was failing to build with the ARM CodeSourcery 2014.05
toolchain. After [1], the test is faling at runtime since the
"BR2_INIT_SYSTEMD=y" symbol disapear from the dot config (.config) due to
the new toolchain dependency.
Fix this by using the same toolchain as for the systemd tests [2]
[1] 2196ee25ff
[2] b3d979c0d1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GENERATE_LOCALE can only be used by uClibc based toolchains with the
internal toolchain backend [1].
The test_tmux is using a external uClibc toolchain, so the
"BR2_GENERATE_LOCALE="en_US.UTF-8"" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
[1] https://git.buildroot.net/buildroot/commit/?id=bd0ffe2206fbd32baf7f4a1dc5fde81cfad70462
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_glxinfo is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_syslinux is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configure.py extracts arch, vendor, and os from the passed
toolchain string on line 180. When using ccache, the passed path string is
"/usr/lib64/ccache/g++" which breaks the logic, causing the following error:
Traceback (most recent call last):
File "./configure.py", line 180, in <module>
(t_arch, t_vendor, t_os) = target.split('-')
ValueError: not enough values to unpack (expected 3, got 1)
Use --with-cxx-compiler=$(HOSTCXX_NOCCACHE) instead of $(HOSTCXX) to fix the
above error.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upcoming release of kodi 19.0 will add libudfread as optional
dependency: https://github.com/xbmc/xbmc/pull/17612
Please note that the removed support of libudf was added on the master
branch so we do not need to backport udf support to kodi 18.x:
558b54a79e
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump package version and in addition update indentation of
hash file (two spaces).
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Current 0001 patch has been committed into buildroot before being
upstreamed. Now that it's been upstreamed it changed a little, so this
makes patch 0002(based on upstream version of patch 0001) impossible to
apply causing build failure while applying patches. So let's update
patch 0001 with upstream one.
Fixes:
http://autobuild.buildroot.net/results/c8a/c8a6776a3e9cec1dc67862e4972e3ca8f4562a50/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A new DRM platform has landed, now you can choose to build with the
DRM or FDO platform, or neither. If neither are selected, Cog will
fallback to a simple WPE backend like WPEBackend-rdk
(https://github.com/WebPlatformForEmbedded/WPEBackend-rdk).
Don't be confused that in both cases the *wpebackend-fdo* package is
required. This is an unfortunate naming issue.
Signed-off-by: Charlie Turner <cturner@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The always-built FDO backend relies on this.
Signed-off-by: Charlie Turner <cturner@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The always-built FDO backend relies on this.
Signed-off-by: Charlie Turner <cturner@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no host variant for SDL2 library in Buildroot.
So the qemu build system will try to detect automatically the
external SDL2 libraries installed on the host.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libSDL2-2.0.so.0 => /lib64/libSDL2-2.0.so.0
Disable explicitely sdl2 options (named sdl) to improve the
build reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
bzip2 support is needed for reading bzip2-compressed dmg images.
But the host-bzip2 is missing from host qemu package dependency,
so the qemu build system will try to detect automatically the
external libbzip2 libraries installed on the host.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libbz2.so.1 => /lib64/libbz2.so.1
or
libbz2.so.1.0 => output/host/lib/libbz2.so.1.0
if host-bzip2 is built before host-qemu.
Disable explicitely bzip2 options to improve the build
reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The vnc support is enabled by default and the build system
will try to detect automatically some external libraries
installed on the host for vnc-png, vnc-jpeg and vnc-sasl.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libpng16.so.16 => /lib64/libpng16.so.16
or
libpng16.so.16 => output/host/lib/libpng16.so.16
if host-libpng is built before host-qemu.
Disable explicitely thoses options to improve the build
reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is no host-libssh in Buildroot, avoid qemu build system
to find libssh from the host.
Under certain circumstances (host distribution, openssl version), the
qemu-system binary fail to start:
host/bin/qemu-system-aarch64: symbol lookup error: /lib64/libssh.so.4: undefined symbol: EVP_KDF_ctrl, version OPENSSL_1_1_1b
$ ldd output/host/bin/qemu-system-aarch64
[...]
libssh.so.4 => /lib64/libssh.so.4
Explicitely disable libssh for the host variant.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After the staging installation, we replace a number of paths in libtool
.la files so that those paths point to STAGING_DIR instead of a location
in the build machine.
However, we replace only paths that start with /usr. And it turns out
that the linux-pam package is configured with --libdir=/lib (linux-pam
seems to always be installed in /lib rather than /usr/lib).
Due to this, libpam.la contains the following line:
libdir='/lib'
When building a configuration that has:
- BR2_ROOTFS_MERGED_USR=y
- BR2_PACKAGE_LINUX_PAM=y
- BR2_PACKAGE_POLKIT=y
on a system that has its system-wide PAM library installed in /lib,
the build fails with:
/lib/libpam.so: file not recognized: File format not recognized
For some reason, libtool searches only in STAGING_DIR/usr/lib, but
when BR2_ROOTFS_MERGED_USR=y, STAGING_DIR/lib points to
STAGING_DIR/usr/lib, so libtool finds libpam.la. And this libpam.la
contains a bogus libdir='/lib' path. libtool then goes on, finds
/lib/libpam.so, and links with it, causing the build failure.
By doing the proper replacement of libdir='/lib', we have a correct
libpam.la, and solve the build issue.
There is no autobuilder failure associated to this issue, as it
requires /lib/libpam.so to exist. This is the case on ArchLinux, on
which Xogium reported the issue, which can also be reproduced in an
ArchLinux container.
Reported-by: Xogium <contact@xogium.me>
Cc: Xogium <contact@xogium.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- tested by manually creating a symlink to libpam.so in /lib
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the dependencies for the init system choice, and the
dependencies for the package, are slightly different, and not in the
same order, the latter making it difficult to assess consistency between
the two.
Fix all that, by cross-duplicating dependencies from the init choice and
the package, and order the dependencies according to the manual (arch
first, toolchain, then the others).
Note that some dependencies are redundant, but kept nonetheless for
correctness:
- BR2_USE_MMU is implied by BR2_TOOLCHAIN_USES_GLIBC, but systemd does
use fork();
- !BR2_STATIC_LIBS is also implied by BR2_TOOLCHAIN_USES_GLIBC, but it
is also inherited from kmod which we select;
- BR2_TOOLCHAIN_HAS_THREADS is also implied by BR2_TOOLCHAIN_USES_GLIBC,
but systemd does use pthread_*() functions.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kodi plays these files through ffmpeg and does not link to libtheora
anymore, see PR 9686.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
unbound open-codes the detection of libexpat, and as all packages doing
so, look in host paths (/usr/local /opt/local /usr/lib /usr/pkg /usr/sfw
/usr). Obviously this is wrong for cross-compilation.
Do for libexpat as we do for openssl, and point unbound to staging dir,
when we know expat is.
Fixes:
http://autobuild.buildroot.org/results/a89ea6aa1cd8c253b1260ea227fea3dc9b095fe8/
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Stefan Ott <stefan@ott.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2020-5291: Bubblewrap (bwrap) before version 0.4.1, if installed
in setuid mode and the kernel supports unprivileged user namespaces,
then the `bwrap --userns2` option can be used to make the setuid process
keep running as root while being traceable. This can in turn be used to
gain root permissions. Note that this only affects the combination of
bubblewrap in setuid mode (which is typically used when unprivileged
user namespaces are not supported) and the support of unprivileged user
namespaces.
Also update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configure options should be passed via CONF_OPTS not CONF_OTPS.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr: also fix the epoxy ones]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Unbound: validating, recursive & caching DNS resolver with
DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following defconfig:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://toolchains.bootlin.com/downloads/releases/toolchains/x86-i686/tarballs/x86-i686--glibc--bleeding-edge-2018.11-1.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_TARGET_SYSLINUX=y
BR2_TARGET_SYSLINUX_EFI=y
fails to build due to missing setjmp/longjmp definitions, which is a
consequence of a change introduced between gnu-efi 3.0.9 and 3.0.10.
This build failure is fixed by adding another syslinux paytch, which
has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new version is mandatory to allow the glibc package bump to version 2.31.
Otherwise it's not possible to connect to the remote host, as reported by [1] [2].
Upstream commit [3][4] fixes the issue.
[1] https://bugs.archlinux.org/task/65386
[2] https://bugs.gentoo.org/708224
[3] beee0ef618
[4] 69298ebfc2
Release Note:
https://www.openssh.com/txt/release-8.2
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the swupdate SYSTEMD option is enabled, systemd needs to be built
before swupdate, otherwise the build fails with:
core/notifier.c:27:10: fatal error: systemd/sd-daemon.h: No such file or directory
27 | #include <systemd/sd-daemon.h>
| ^~~~~~~~~~~~~~~~~~~~~
Of course, it remains up to the user to make sure that the systemd
package is enabled when systemd support is enabled in the swupdate
configuration.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the toolchain being used by the testsuite infra.
The new toolchain 2018.11-1 is based on gcc 8.2, uClibc-ng 1.0.30,
linux-headers 4.14 and binutils 2.31.1.
Enable BR2_TOOLCHAIN_HAS_THREADS_DEBUG that is now required.
The old toolchain 2017.05 is based on gcc 4.9, uClibc-ng 1.0.25,
linux-headers 3.10 and binutils 2.27.
Tested with gitlab
https://gitlab.com/kubu93/buildroot/pipelines/132376578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NSS assumes that every neon arm32 build is an armv7, but this is
not always true(i.e. build arm32 for armv8), so let's add a patch to
remove -march=armv7 flag when building gcm-arm32-neon.c
Fixes:
http://autobuild.buildroot.net/results/464/464044fda2850123339de6c8071374e380636ee0/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has been tested on Nitrogen8M with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Also update the help text as we shouldn't specify a kernel revision. It
is just that this module isn't meant for mainline kernel, only its NXP
forked version.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch which was applied upstream:
bd01ba5a6b
Switched to github helper, upstream does not provide a tarball for this
release.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switched to github helper, upstream does not provide a tarball for this
release.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
