Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for gcc 5.1 in Buildroot. In terms of gcc
patches, compared to gcc 4.9.x:
* Kept as is, sometimes after minor adjusments:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
850-libstdcxx-uclibc-c99.patch
860-cilk-wchar.patch
* Dropped:
110-pr64896.patch
111-pr65730.patch
* Split in multiple parts:
900-musl-support.patch
The patches from Crosstool-NG for muls support are used instead of
one single patch.
* Renamed:
910-gcc-poison-system-directories.patch to
200-gcc-poison-system-directories.patch
920-libgcc-remove-unistd-header.patch to
201-libgcc-remove-unistd-header.patch
Since the 9xx part of the series is now used by the various musl
related patches.
We have tested the following configurations, with a minimal Busybox
system:
* ARM, uClibc-ng
* ARM, glibc
* ARM, musl
* x86, uClibc-ng and uClibc 0.9.33.2
* x86, glibc
* x86, musl
All of the configurations built fine. All the configurations boot fine
in Qemu, except x86/uClibc (either ng or 0.9.33.2), it segfaults when
running init:
devtmpfs: mounted
Freeing unused kernel memory: 300K (c1389000 - c13d4000)
init[1]: segfault at 0 ip b77708c1 sp bfa9bb0c error 4 in ld-uClibc-0.9.33.2.so[b776c000+6000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
We'll give some time for the uClibc developers to fix the problem
before taking other measures in Buildroot to exclude gcc 5.1 from a
x86/uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise it's a no-op for sh4.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Note: host-binutils-arc-2014.12 install libiberty.a in HOST_DIR
but it was overwritten by the gcc one. The host-binutils's
libiberty.a also broke the host-gdb build. This should be
fixed in a followup patch.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Fixes:
http://autobuild.buildroot.net/results/28f/28f3074e99a35f4321dad2fa6c5abdad14d2d2c6/
And many more.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.
So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.
Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.
Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(ARM and SH4 uClibc toolchain builds)
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Target size growth is ~15 KiB for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally libsanitizer handles the different functionalities gracefully for
each architecture, but it doesn't seem to be the case for SPARC.
Since in general it doesn't support anything for SPARC just disable it.
Fixes bug #7951.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory remove support for non-lfs
tweaks/variables in the package infra and the gcc build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support an internal bfin toolchain hence it's dead code.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was kept for the internal blackfin toolchain which has been removed
since because of lack of maintenance and testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we don't support the internal blackfin toolchain any more
remove unnecessary conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add fix for GCC PR 64896 from the gcc-4_9-branch of gcc.
This fixes bugzilla bug 7961.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libcilk library (used on x86/x86-64 when building with C++ support)
unconditionally uses WCHAR_MIN / WCHAR_MAX, causing build issues with uClibc
when configured without wchar support.
Reported-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new option BR2_GCC_ENABLE_LTO that builds gcc and binutils with
LTO support.
Individual packages still have to enable LTO explicitly by passing '-flto' to
GCC, which passes it on to the linker. This option does not add that flag
globally. Some packages detect if the compiler supports LTO and enable the flag
if it does.
To support LTO, ar and ranlib must be called with an argument which triggers the
usage of the LTO plugin. Since GCC doesn't call these tools itself, it instead
provides wrappers for ar and ranlib that pass the LTO arguments. This way
existing Makefiles don't need to be changed for LTO support. However, these
wrappers are called <tuple>-gcc-ar which matches the pattern to link to the
buildroot wrapper in the external toolchain logic. So the external toolchain
logic is updated to provide the correct symlink.
[Thomas:
- Add a separate BR2_BINUTILS_ENABLE_LTO option to enable LTO
support in binutils. This is a blind option, selected by
BR2_GCC_ENABLE_LTO. It just avoids having binutils.mk poke
directly into gcc Config.in options.
- Remove the check on the AVR32 special gcc version, which we don't
support anymore.
- Adapt the help text of the LTO Config.in option to no longer
mention "Since version 4.5", since we only support gcc >= 4.5 in
Buildroot anyway.
- Fix typo in toolchain-external.mk comment.]
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for AMD steamroller optimizations, available in gcc 4.8+ as
bdver3.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't support older versions that can't handle it any more.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Versions older than GCC v4.9 do not support the Nios-II architecture
so disable them.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to gcc removing a unistd.h header include
in libgcc/config/nios2/linux-atomic.c
The file is built as part of GCC first stage (host-gcc-initial),
and so the header is not accesible. Given the header is not needed
it's fine to simply remove it.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now when new shiny tools are released by Synopsys we're ready for
version update in Buildroot again.
More details about arc-2014.12 release are available here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2014.12
Following patches were removed from GCC since they are a part of release
now:
* 200-size_type_unsigned_int.patch
* 300-ptrdiff_type_int.patch
* 400-call-arc_hazard-before-branch-shortening.patch
* 401-fix-length-attribute-for-casesi_load-pattern.patch
* 402-fix-length-of-instructions-that-are-in-delay-slot-and-needs-to-be-predicated.patch
* 403-update-casesi_compact_jump-instruction-length.patch
But since arc-2014.12 tools are still based on GCC 4.8 following patches
ar still relevant so moving to the new folder to match ARC gcc bump.
* 100-libstdcxx-uclibc-c99.patch
* 910-gcc-poison-system-directories.patch
Binutils are still based on 2.23 so following patch still makes sense:
* 600-poison-system-directories.patch
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libitm (transactional memory) needs SPARC V9+ ISA, otherwise when
enabling C++ the toolchain fails to build:
/tmp/cclQ6hrD.s: Assembler messages:
/tmp/cclQ6hrD.s:1261: Error: Architecture mismatch on "rd".
/tmp/cclQ6hrD.s:1261: (Requires v9|v9a|v9b; requested architecture is
v8.)
Makefile:517: recipe for target 'beginend.lo' failed
make[5]: *** [beginend.lo] Error 1
So disable it for our current (v8, leon3) support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit enables the poison system directories option, which is now
available thanks to the gcc patches that have been added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.7.4, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc arc-2014.08,
and modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH
environment variable to error out instead of just warn when unsafe
paths are used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.8.3, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.9.1, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Freescale e5500 and e6500 cores are supported for versions >= 4.8
So filter out all of the older versions to avoid build failures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the fortran and objective C language support since these have
been deprecated since more than a year ago.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the BR2_GCC_TARGET_TUNE value is always empty now, there is no
longer a point in using it in the gcc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
That gcc series is old and is not used as the default version for
any of the architectures we support, so this commit gets rid of it.
[Thomas: move the Config.in.legacy option at the right location.]
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is support for -mcpu=leon3 from gcc 4.8.3. Use this for LEON systems
instead of the non-mainline targets sparcsfleon, sparchfleon, sparcsfleonv8, and
sparchfleonv8.
[Thomas: add Config.in.legacy handling for the removed options.]
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop PR60102 patch which is now upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed during the dev days. It is broken for uClibc/musl and
architectures not using mainline gcc, so it has only very limited
usefulness.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we switched to a two stage gcc build process, the AVR32
toolchain stopped building. This is because with such an old gcc
version, we cannot use the all-target-libgcc and install-target-libgcc
targets.
Before the two stage gcc, libgcc was only built in gcc-intermediate,
which carried a similar logic. This commit basically restores in
gcc-initial the logic that used to be in gcc-intermediate, which
consists in using the all-target-libcc and install-target-libgcc
targets only for gcc versions others than the AVR32 one.
Using the BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE option has a way of
distinguishing the old AVR32 compiler from the other gcc versions is a
bit ugly, but it's what was done in gcc-intermediate before. And since
the AVR32 support is due to go away at some point in the hopefully
near future, we don't care that much.
This will fix the build of the two AVR32 defconfig that have been
constantly failing since switching to the two stage gcc process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Symptoms usually seen are like that:
--->---
Error: operand out of range (128 is not between -128 and 127)
--->---
where range may differ.
Since compiler tries to use jump/branch instructions with the shortest encoding
of offset it's important to calculate required offset properly.
In case of miscalculation by compiler later assembler throws an error because of
inability to encode requested value.
Fixes are taken from current development branch of GCC for ARC and will be a
part of the next release of ARC tools, so at that point patch should be dropped.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
