Until now, if locale support was requested, vim would be built with NLS or
not depending on the build order. This patch now makes the dependency
explicit.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 924b8739da we no longer declare glibc and eglibc support as
experimental, so it shouldn't be mentioned in the help text anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix download url : isn't available on previous ftp, use an other one
instead
- add version according to source code version
- rename and clean patch according to patch policy
[Peter: adjust upstream URL in Config.in]
Signed-off-by: Arnaud Aujon <arnaud.aujon@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Revamp initscripts see bug #3601
* Trim whitespace
* Check for installed binary (dhcp-relay)
* Check for installed config (dhcp-server)
* Check for proper variable setup from the script (both)
* Add "FAIL" message when startup fails (blind OK isn't accurate)
* Add start/stop messages to dhcp-relay
Switch bool to "dhcp (ISC)" to keep in line with package sorting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename patches for uClibc version 0.9.31, for consistency with the general
patch naming scheme in Buildroot. Also remove a .avr32 extension from a patch;
this is not necessary, since uclibc 0.9.31 is unavailable on architectures
other than avr32.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fallocate syscall is not available on avr32. This is needed by the e4defrag
utility, so we disable this on avr32.
Fixes build failures such as the following.
http://autobuild.buildroot.net/results/dcb/dcb4e5c6981a9299a2eb18e325d4de621846afdb/
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As far as I can tell enabling tcl support has no affect on the actual
library. Furthermore, wvstreams has been checking for/linking against
tcl 8.3 which has never been supported in buildroot as far as I can tell
(8.4 added in 2005). That being said there is clearly no reason to keep
this around.
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using ccache TARGET_CC is something like
ccache gcc
This causes problems in the pv build which attempts to
override LD because the command ends up being
make [...] LD=/tools/ccache /tools/gcc LDFLAGS="[...]
As a result, during the build phase it attempts to build
/tools/gcc which succeeds by doing nothing:
make[1]: Nothing to be done for `/tools/gcc'.
and during the install phase you get the real build which
errors out on the LD error this snippet was attempting to
fix:
ld -r -o src/library.o src/library/getopt.o \
src/library/gettext.o
ld: src/library/gettext.o: Relocations in generic ELF \
(EM: 40)
src/library/gettext.o: error adding symbols: File in \
wrong format
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Thomas Petazzoni, the uclibc 0.9.31 build fails for avr32:
In file included from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/kernel.h:4,
from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/netlink.h:4,
from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/rtnetlink.h:5,
from libc/inet/netlinkaccess.h:27,
from libc/inet/if_index.c:36:
/opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/sysinfo.h:8: error: expected specifier-qualifier-list before '__kernel_long_t'
make[1]: *** [libc/inet/if_index.os] Error 1
make[1]: Leaving directory `/opt/toolchain-build/build/uclibc-0.9.31.1'
The problem is reported at:
https://lkml.org/lkml/2013/5/18/1
The offending kernel commit is:
http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=ccdfcc398594
The fix is to patch uclibc 0.9.31 to add the missing kernel data types. The patch
will only be generated for avr32, since uclibc 0.9.31 is not available in Buildroot
for any other architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Cassiano Martin in bug #6692 if host == target the nano
package can pick up the host libmagic and break.
So add a check to see if the file package is enabled and use it,
otherwise just disable libmagic support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed by Thomas P. kernel 3.12 oopses when loading/using the
emulated network.
Seems 3.12 broke versatile for qemu like in the past, only in a more
subtle way this time that escaped my automated qemu builds/tests.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Offer a little bit more visibility to the companies who sponsored us,
either by sponsoring the developer days, or development
boards. Hopefully this will encourage other companies to do the same :)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop 'the' before FOSDEM]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to some tricky make behavior, the license texts of host packages that
did not provide an explicit HOST_FOO_LICENSE_FILES definition was not saved.
The problem is that it is not straightforward to use a variable
defined/updated inside an evaluated block as input to a foreach statement.
If you try to use $(FOO) then only the original value of FOO is used for
foreach, any update inside the block is ignored. However, if you use
$$(FOO), the entire contents of FOO (typically a list of items) is passed
as one item to foreach, thus causing just one iteration instead of several.
>From Arnout Vandecapelle's explanation:
Any variable referenced with a single $ inside the inner-generic-package
macro is expanded before the resulting contents are eval'ed. Therefore, it
is not possible to refer to variables defined by the inner-generic-package
macro from within a single-$ function call.
To fix the problem, one should defer the evaluation of the entire block
using double dollar signs.
Additionally, a few empty lines have been added to the legal-info-foo block
for clarity.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the generic package handler checks for a directory with patches
before starting apply-patches.sh, this is not the case for gcc: the
script is called, even if there is no directory with patches. This results
into a build failure, as apply-patches exits with error code 1 if the
directory doesn't exist.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(e)glibc doesn't support a fully statically linked userspace. Even a
basic program such as Busybox fails to do authentication due to glibc
loading some libraries dynamically. Therefore, we disable the
possibility of using a (e)glibc toolchain when
BR2_PREFER_STATIC_LIB=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(e)glibc doesn't support a fully statically linked userspace. Even a
basic program such as Busybox fails to do authentication due to glibc
loading some libraries dynamically. Therefore, we disable the
possibility of building a glibc toolchain when
BR2_PREFER_STATIC_LIB=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The glibc and eglibc support has been introduced since a little bit of
time now, I believe we can remove the "experimental" statement next to
it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu depends on __sync_sub_and_fetch and other atomic primitives that
don't exist in the ARC toolchain yet.
[Peter: adjust beecrypt/php comment dependency, don't mention atomic builtins]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/34f/34f238cdb1b1b4be1a11143b5e4a17c78c2fc289/
The rollingfile functionality only gets built if pthread support is
available, but a call to these functions from log4c_fini() was outside
the #if WITH_ROLLINGFILE conditional, causing linker errors when the
library is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libqmi build specifies -Werror in the CFLAGS by default. This causes
build failures such as the following.
http://autobuild.buildroot.net/results/070/070449299aa9025c4bc6769524a6e22d66c92a65/
The -Werror flag can be disabled using a configuration switch.
[Peter: use =no instead and add a comment explaining why]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.12 release notes:
* Fix: Remove alternate method to check for VLAN tag offload on Linux
< 2.6.37 (-k/-K options)
* Fix: Hide state of VLAN tag offload and LRO if the kernel is too old
for us to reliably detect them (-k option)
* Feature: Add register dump support for Solarflare SFC9100 family
(-d option)
3.12.1 release notes:
This includes a couple of changes that should have gone into 3.12.
* Fix: Memory corruption when applying external calibration to
SFF-8472 module diagnostics (-m option)
* Feature: Add Intel 82599 and x540 DCB registers to dump
(-d option)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building host-bison needs perl 5.8.7+, as it uses the "-f" option
for site customization scripts. This feature was added in 5.8.7.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I have just released version 3.2.1 of the pciutils. It's purely
a maintenance release with a couple of minor bug fixes and minor
improvements. Thus quoth the changelog:
2013-11-10 Martin Mares <mj@ucw.cz>
* Released as 3.2.1.
* CardBus bridge capabilities are displayed.
* PCIe L1 PM substates are decoded.
* Various bugs were fixed in decoding of PCIe capabilities.
* The sysfs back-end does not spit out unnecessary warnings when
empty slots report only a partial device address. This actually
happens on IBM pSeries.
* Updated pci.ids to the today's snapshot of the database.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
