sepolgen is a bit weird: DESTDIR acts as a kind of prefix, PYTHONLIBDIR
is relative to it (and a / is added between them).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@codeblue.com>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 builds for the target but installs with DESTDIR=$(HOST_DIR). Since
we set prefix to /usr in TARGET_CONF_OPTS, this results in installing
things in $(HOST_DIR)/usr.
To make sure we don't install in $(HOST_DIR)/usr, override --prefix and
--exec-prefix.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have a patch that adds $(DESTDIR) to the install commands of
raspberrypi-usbboot, but it would still be installed in $(DESTDIR)/usr.
We don't want that, so remove the /usr part in the installation
commands.
Note that upstream has removed the 'install' target entirely, so
there's no point trying to keep the patch in upstreamable shape (i.e.
defaulting DESTDIR to /usr).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... and remove the /usr prefix
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... and remove the /usr prefix
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... and also remove the /usr prefix.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
genromfs is special because it uses "PREFIX" in the meaning of DESTDIR
and "prefix" in the meaning of prefix. We were up to know using it
incorrectly for host: PREFIX shouldn't be set and only prefix should
be set.
Add an explanatory comment for this unusual behaviour.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While we're at it, correct it to $(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\$(HOST_DIR)/usr%$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/share' | xargs sed -i 's%$(HOST_DIR)/usr/share%$(HOST_DIR)/share%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/include' | xargs sed -i 's%$(HOST_DIR)/usr/include%$(HOST_DIR)/include%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/lib' | xargs sed -i 's%$(HOST_DIR)/usr/lib%$(HOST_DIR)/lib%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/sbin' | xargs sed -i 's%$(HOST_DIR)/usr/sbin%$(HOST_DIR)/sbin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\(prefix\|PREFIX\)=\("\?\)\$(HOST_DIR)/usr%\1=\2$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream removed the src/daemon/pulseaudio-kde.desktop.in since the
version 6.0 [1].
[1] f46799579f
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also update the patch line numbers to work with 1.12.0
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FEATURE_CLEAN_UP is a configuration feature to get busybox to explicitly
call free() on dynamic allocated memory just before exiting so memory leak
detectors like valgrind don't get confused. Upstream explicitly recommends
to NOT enable this option:
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
help
As a size optimization, busybox normally exits without explicitly
freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
Having this option enabled adds a bit of bloat, but more significantly these
cleanup code paths don't get tested very often so some times get out of sync
with the allocation code which can lead to crashes (or security issues from
double frees), so it is safer to disable the option.
For people wanting to debug memory leak issues with busybox, the option can
still be enabled with a configuration fragment (or a custom config).
The size difference isn't huge (br-arm-full-static):
-rwxr-xr-x 1 peko peko 886K Jul 5 10:56 output-busybox1/target/bin/busybox
-rwxr-xr-x 1 peko peko 882K Jul 5 10:53 output-busybox2/target/bin/busybox
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In copy_toolchain_sysroot, if no ld.so has been found in the
STAGING_DIR after the sysroot copy, we look at ARCH_SYSROOT_DIR if a
ld.so is available there. We do this for both ld*.so and ld*.so.*.
However, when copying thing from staging to target (as listed in
TOOLCHAIN_EXTERNAL_LIBS), we only match on ld*.so.*. This would mean
that even if a dynamic linker matching ld*.so but not ld*.so.* was
copied into staging by copy_toolchain_sysroot, it would anyway not be
copied to the target filesystem, making the system unusable.
Therefore, we can remove the special case on ld*.so, and keep only
ld*.so.*.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgcc_s.so is now added to TOOLCHAIN_EXTERNAL_LIBS for glibc/uclibc
in one place, and for musl in another place. Bottom line: it should be
in TOOLCHAIN_EXTERNAL_LIBS unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the dynamic loader, we're copying ld*.so* for glibc and
uClibc, except for glibc/EABIhf where we are explicitly copying
ld-linux-armhf.so.*. For musl, we're not copying the dynamic linker
because it's simply a symbolic link to libc.so. However, the name of
the musl dynamic linker changes from one architecture to the other,
and we don't handle all cases.
Since handling the musl dynamic linker symlink creation is becoming
more and more annoying to maintain, this commit makes musl use the
same mechanism as glibc/uClibc: put the dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS.
In addition, the special condition on glibc/EABIhf was added in
11ec38b695 ("toolchain-external: fix
Linaro ARM toolchain support") because an old Linaro toolchain had two
dynamic loaders, and we wanted to copy only one. But 1/ this is old
and 2/ having the two dynamic linkers doesn't really matter.
So this commit simply unconditionally adds "ld*.so*" to
TOOLCHAIN_EXTERNAL_LIBS, regardless of the C library being chosen. It
re-uses the musl dynamic linker symlink from the sysroot, which makes
it always correct, and allows us to remove the
TOOLCHAIN_EXTERNAL_MUSL_LD_LINK hook, and all the related logic.
This commit therefore solves two problems with the musl dynamic linker
symbolic link creation logic:
1 We support all architectures, without having to hardcode in
Buildroot the mapping between the CPU architecture and the
corresponding dynamic linker name. For example, our current logic
was not handling the mips64+n32 ABI case, where the dynamic linker
is named ld-musl-mipsn32el.so.1.
2 We support Crosstool-NG musl toolchains, where the dynamic linker
is in /lib, but libc.so is in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit therefore replaces:
- https://patchwork.ozlabs.org/patch/780411/ (was another solution
for solving problem 1 above)
- https://patchwork.ozlabs.org/patch/763977/ and
https://patchwork.ozlabs.org/patch/748974/ (was another solution
for solving problem 2 above)
copy_toolchain_lib_root copies libraries from staging to target,
resolving and copying symbolic links along the way.
The most inner loop, a "while" loop, starts from an initial name, and
if it's a symbolic link, gets resolved to the target, and the loop
iterates until we reach a real file. However, the destination folder
where the symbolic link or real file is created is computed in DESTDIR
only once, before this loop starts. Therefore, this loop works fine
when all symbolic links in the chain, and the real file all belong to
the same directory. But it doesn't do the correct thing when the
symbolic link and/or real file are in different folder.
An example is Crosstool-NG musl toolchains, where the dynamic loader
is in /lib/ld-musl*.so but points to ../usr/lib/libc.so. With the
current logic, we copy /lib/ld-musl*.so to /lib, but we also copy
libc.so to /lib instead of the expected /usr/lib.
This currently doesn't cause any problem because the musl dynamic
linker is manually created by the TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
hook. However, this logic has a number of problems, so in a followup
commit, we are going to put the musl dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS, which will cause it to be copied by
copy_toolchain_lib_root. But we obviously want the link and its target
to be copied to the right place, hence this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These tests simply build a system with musl and uclibc toolchains, and
boot them under qemu. It allows to minimally validate that our support
for musl/uclibc external toolchains is working. We already had some
tests covering glibc toolchains, so we can now easily test that all
three C libraries are supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit is part of the series, as I've written/used those tests to
validate that things are still working correctly with all of glibc,
uclibc and musl toolchains.
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
$(PKG)_ERLANG_LIBDIR is problematic because it is used both for host
and staging/target. Therefore, the usr/ part is removed from it, and
added the the callers instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of python packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move toolchainfile.cmake and Buildroot.cmake from
$(HOST_DIR)/usr/share/buildroot to $(HOST_DIR)/share/buildroot.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of autotools packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/lib and $(HOST_DIR)/usr/lib are the same directory, it
doesn't make sense to pass both to LDFLAGS.
Also use $(HOST_DIR)/lib instead of $(HOST_DIR)/usr/lib for the RPATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/usr is a symlink to $(HOST_DIR), it makes no sense to
still have it in BR_PATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
