Add a simple test case that minimally uses the module.
Add haveged to the target to generate enough entropy so pynacl ->
libsodium don't hang waiting for /dev/random.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage. Call 'login' and try
wrong user/password, expecting the 'Login incorrect' message.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that creates a hash for a password and verifies
it against an incorrect and a correct password.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage by creating a class with
two constants.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a simple script to check the basic usage. Since this package
provides command line arguments, override run_sample_scripts to call the
script with arguments and check the expected output.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage, storing a dict into a
file and then retrieving the dict from the file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage by checking the
corresponding representation of a 12-bit decimal number in hex, binary
and integer.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a minimal script to check the basic usage by creating and using a
small state machine.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a minimal script to check the basic usage creating a class with 2
attributes.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a simple script to check the basic usage. Since this package
provides command line arguments, override run_sample_scripts to call the
script with arguments and check the expected output.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SDL_LinuxSetThreadPriority() has been added since version 2.0.9 and
f25a7fa870
However, this function is used in src/dynapi/SDL_dynapi_procs.h even
when SDL_THREADS_DISABLED
However, when SDL_THREADS_DISABLED is set, SDL_LinuxSetThreadPriority is
not defined because thread/pthread/SDL_systhread.c is not built
So check SDL_THREADS_DISABLED in addition to __LINUX__
Fixes:
- http://autobuild.buildroot.org/results/539cb9ab6c605dc6be73ebe90debab1a998f2451
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- This version adds support for ipset version 7, see:
b7a98f9265
- Remove patch and AUTORECONF = YES, an alternative solution has been
implemented, see:
9bd10d8168
- Disable hardening option (enabled by default):
5a65e1eb55
Fixes:
- http://autobuild.buildroot.org/results/b730e8b25c1d3343b7a6d73f6d3b82b13692578b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patches for atom glue and remove CXX compiler check as they are
applied upstream.
Replace patch to disable libbsd with upstream patch to accomplish the
same thing using --without-libbsd.
Enable support for readline when that package is enabled.
Enable lldpd's systemd unit file.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since bumping luv from version 1.9.1 to 1.22.0, building luvi fails, as
"luv.h" now includes "compat-5.3.h", which is locally shipped as a
dependency to lua-compat-5.3.
Fixing the issue reveals, that luvi is using `luaL_newlib` which is not
available in the Lua 5.1 API. Building luvi with luv 1.9.1 was not an
issue before, because luv 1.9.1 defined `luaL_newlib` in luv.h, which
was removed in 1.22.0 in favour of using lua-compat-5.3.
Therefore, add a patch which defines `luaL_newlib` in luvi.h.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a patch to fix a build issue with luvi after bumping luv from
version 1.9.1 to 1.22.0.
The problem is that luv now uses lua-compat-5.3 instead of defining the
Lua 5.3 API itself. Unfortunately, luv.h now includes compat-5.3.h in the
header file, which causes the build issue with luvi, as luvi does not
find this local header file. Note, that luv ships lua-compat-5.3 as a
dependency.
Therefore, the patch includes compat-5.3.h in the source file luv.c, so
it isn't exposed to external programs.
Fixes:
http://autobuild.buildroot.net/results/2244cd30986aff29b763fb7183f6fc27a82bd7fahttp://autobuild.buildroot.net/results/01938f7f018dc69d564c22489933647b1daf62f3http://autobuild.buildroot.net/results/8217e863c2776d299cb90b90f1a2ed8233ec82ba
.. and many more
Note, that fixing this issue reveals another issue in luvi, which is
fixed by the follow up patch.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
ondemand cpufreq govenor so the frequency is dynamically adjusted - So
enable it in linux-extra.config.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
4.18 brought cpufreq support for H3, but sunxi_defconfig does not enable the
driver for the sy8106a regulator used on the board or enable the ondemand
cpufreq govenor so the frequency is dynamically adjusted - So enable these in
linux.fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the kernel and U-Boot versions to the actual versions in use.
Update the description of supported hardware features.
Add a note that the stale SPI flash environment issue only affects the
vendor BSP.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to version 2018.11. This version supports autodetection of
SD/eMMC boot source, so we can now enable environment load from SD card.
Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save
device. This avoids stale environment values from the SPI flash. That in
turn, allows to use the more convenient distro boot which is enabled in
the default environment.
Bump kernel to version 4.19.2. This version enables
CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from
the kernel kconfig fragment. Enable support for SFP modules detection
and configuration. Leave the PHY drivers for now to keep them built into
the kernel. The kernel defconfig builds these drivers as modules. But
that does not work as expected in the default configuration.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to v2018.9 added ostree-finalize-staged.path through
ac1a919ffd
However, this file was not added in the tarball until commit:
62594765b2
So use the new 2018.9.1 tarball to get this file otherwise build with
systemd will fail
Fixes:
- http://autobuild.buildroot.org/results/fc6435282630e60927f88bf5954805ebbaa60cb3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This option is available since v2018.3:
17db0f15a7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- sunxi mali mainline
- sunxi tools
like in olimex_a20_olinuxino_lime_legacy.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 5d4f23cbe6 ("toolchain: Bump
ARC tools to arc-2018.09-rc1"), the glibc version for the ARC
architecture was bumped, but the hashes of the license files were not
updated accordingly, causing a build failure during "legal-info":
ERROR: LICENSES has wrong sha256 hash:
ERROR: expected: 61abdd6930c9c599062d89e916b3e7968783879b6be0ee1c6229dd6169def431
ERROR: got : 35bdb41dc0bcb10702ddacbd51ec4c0fe6fb3129f734e8c85fc02e4d3eb0ce3f
The changes between the previous LICENSES file and the new one are:
- The text related to libidn has been removed from the LICENSES file,
following the switch to libidn2:
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=7f9f1ecb710eac4d65bb02785ddf288cac098323#patch2
- The text related to stdio-common/tst-printf.c has been removed from
the LICENSES file, following the removal of this non-free code from
glibc:
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=5a357506659f9a00fcf5bc9c5d8fc676175c89a7#patch2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The code includes dlfcn.h even if --enable-static and --disable-shared
are passed to configure. There is an "#ifndef NO_DL ... #endif" wrapper
but NO_DL is never defined and adding "-DNO_DL" to CFLAGS causes other
compilation errors.
Fixes:
http://autobuild.buildroot.net/results/cfc3bfef5e93329bf944a57947086d9ddc4fece3
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ARC toolchain to arc-2018.09-rc2,
which includes significant changes since arc-2018.09-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.
Please note that it is a release candidate and it might
contain some breakages, please don't use it for production builds.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libunwind was dropped since 3.0.91, see:
bb707dc0fe
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit "2927f412be support/testing: standardize defconfig
fragments style" all other test cases use the same style for defconfig
fragments:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Do the same here for consistency.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ssh command was added back in 2011 with commit c61788f09 (GENTARGETS:
add support for scp://) and was used to check that the remote file
existed, back when we supported 'make source-check'.
However, in 2017, with commit bf28a165d (pkg-{download, generic}: remove
source-check), we actually removed support for source-check.
The SSH command however was not removed then, and stuck, even though
nothing ever uses it It is not even exported in the environment, and scp
does not use it either (it has -S to specify an ssh-compatible program).
Get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 22b327fc74 ("pkg-luarocks: fix
top-level parallel makefile support"), a flock on $(TARGET_DIR) was
added to ensure that two Luarocks packages are not installed at the
same time.
However, to support top-level parallel build, we have now clearly
decided that per-package folders is a requirement. Therefore,
TARGET_DIR is anyway going to be different for each package, making
this flock unnecessary.
Trying to use top-level parallel build without per-package folder is
simply not supported, so this commit drops the unnecessary flock.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
gio from libglib2 is used for dbus support
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
popt is not needed since version 1.3.1 and:
3452517c4f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
msmtpd uses fork so enable it if MMU is available
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
