Bump mplayer to the first version that fixes this issue:
file.c:23:5: warning: "HAVE_MMAP" is not defined
file.c:25:7: warning: "HAVE_MAPVIEWOFFILE" is not defined
file.c:77:5: warning: "HAVE_MMAP" is not defined
file.c:87:7: warning: "HAVE_MAPVIEWOFFILE" is not defined
file.c:124:5: warning: "HAVE_MMAP" is not defined
file.c:126:7: warning: "HAVE_MAPVIEWOFFILE" is not defined
file.c: In function 'av_file_map':
file.c:50: error: 'HAVE_MMAP' undeclared (first use in this function)
file.c:50: error: (Each undeclared identifier is reported only once
file.c:50: error: for each function it appears in.)
make[2]: *** [file.o] Error 1
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gcc_target wants uclibc_target which is now first stage uclibc (not
real, from the NPTL build stage addition).
This triggers gcc-final to be rebuilt (albeit cached) and reinstalled,
thus touching all the stamps around and triggering a rebuild of
gcc_target.
Switch to $(STAMP_DIR)/gcc_libs_target_installed instead so that we only
depend on the last stage of cross gcc being installed to rebuild.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the default .config file.
Remove now unnecessary patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Easynews has been down for a number of days, and it is no longer in the
mirror list, so use the mirror from the University of Kent instead by
default.
At the same time fix the link to the sf mirror list.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If target /etc/mpd.conf exists the evaluation will be fail thus breaking
the build process. Fix it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libao output must be explicitly enabled, so fix it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
New antenna configuration and wds peer commands.
New mesh functionality.
Misc fixes.
See http://www.spinics.net/lists/linux-wireless/msg64061.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump e2fsprogs to version 1.41.14
Also export libblkid properly for util-linux to use.
[Peter: install pkg-config files]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The uClibc configuration file toolchain/uClibc/uClibc.config-locale
does not exist anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The FindQt4 module of CMake insists on having uic, even if the QtGui
module isn't part of the requirements to build the program. This isn't
correct, as Qt doesn't build/install the uic program when QtGui is
disabled (uic is used to generate some UI code).
This has been fixed upstream in
http://cmake.org/gitweb?p=cmake.git;a=commit;h=43cb9b8276a70d153d56a69d5c61daaf2bc51b78. This
commit will be part of the upcoming 2.8.4 CMake release, but in the
mean time, let's include it in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt build system installs all host programs (uic, rcc, moc, qmake,
etc.) in the same base directory as the headers and libraries, but
that's not great for Buildroot.
So we now move the host programs and the mkspecs files to the
$(HOST_DIR), and create a qt.conf, which tells qmake where everything
is located.
Tested with Qmake and Cmake as build system for a simple Qt
application.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: add tidsp-binaries to _DEPENDENCIES]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already pass the LD variable to openssl in order to use gcc as the
driver for the link process, instead of directly using the ld
linker. However, we were not passing LDFLAGS so that the compiler
flags are passed, which means that with multilib toolchains, the
incorrect library variant could be used at link time, leading to
invalid binaries (partly ARMv4, partly ARMv5) or broken compilation
(when the build took place in soft-float, but the link stage takes
place against hard-float libraries).
This fixes a problem reported on IRC by amo-ej1 when compiling ssh on
PowerPC e500v2 with a CodeSourcery toolchain ("crtbegin.o uses hard
float, sshd uses soft float").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This requires removing "deprecated" markings from gdb-6.6, but this isn't
that big of a deal. That is the last version with Blackfin support at the
moment and we're in the process of getting mainlined.
[Peter: only mark as undeprecated on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: don't allow MMU on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The stripping options operate on the final image and not the intermediate
builds, so requiring stripping to be disabled just to enable debugging
options doesn't make much sense. Especially when working with gdbserver:
only the host needs the debugging information to be available. The board
can run & debug perfectly fine without it.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, the documentation says $(PKG)_SITE_METHOD should have upper
case names such as SVN or GIT, but the implementation only accepts lower
case svn or git. This fixes the documentation.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
liboil is not needed not used any more. orc _can_ be used instead, but
it's not needed.
[Peter: get rid of liboil selects]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Further more:
- Rename to S49ntp to match other packages
- Fix start target to run ntpd, and only try ntpdate if available
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#2935
Add ntpdate option and make ntpd optional.
Based on incomplete patch by Frederik Pasch <fpasch@googlemail.com>
Also enable crypto when openssl is enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
