binutils got disabled as a target package for aarch64 back in Buildroot
2012.11 (commit 660d16f4).
The default version 2.21.1 at the time didn't really support aarch64, as
shown by the autobuilder error reference in that commit.
binutils has now had support for aarch64 since 2.23, but was never
re-enabled for aarch64.
All of the binutils versions currently supported by Buildroot (oldest
being 2.24) support aarch64, so we can now enable it without any
restrictions.
This same patch also touches the dropwatch, lightning and oprofile
packages which all select binutils and had the 'depends on !aarch64' to
keep Kconfig consistent. They are now re-enabled for aarch64 as well.
They are changed in this same patch so that Kconfig is kept consistent
and doesn't end up having them disabled in a commit which only has the
binutils change applied.
lightning has other explicit arch dependencies so it is not actually yet
available in aarch64, but at least the dependency on !aarch64 because of
binutils is not needed anymore.
Everything has been build tested with Buildroot and external toolchains.
binutils and dropwatch work fine in a qemu target. oprofile doesn't seem
to be supported in the qemu aarch64 processor but builds fine and seems
to have some level of aarch64 support in the source, so there doesn't
seem to be a reason to keep it disabled in Kconfig.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 500de2598a, support for eglibc
was removed, but forgot to remove the corresponding hashes from the hash
file. This commit fixes this mistake.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by Peter [1], use TARGET_CONFIGURE_OPTS to provide AR, CC and LDFLAGS.
Also remove TARGET_MAKE_ENV since it only contains PATH=$(BR_PATH) which is
also provided by TARGET_CONFIGURE_OPTS.
[1] http://lists.busybox.net/pipermail/buildroot/2016-May/162418.html
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for i.MX25 PDK board using U-boot 2016.05 and
kernel 4.6.1.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new configuration for NXP i.MX51 EVK based on U-boot 2016.05
and kernel 4.6.1.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the demo application code, va_list type is used in eventlogstring.h
so stdarg.h must be included to define it.
This problem occurs with a uClibc-ng based toolchain.
Fixes:
http://autobuild.buildroot.net/results/a9e/a9e7615a19922706039bf97ccb94bcf5b99330b2
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f1bc98f396 the CFG_BUILD_KERNEL_STACK
option wasn't set when the PCIe library interface is selected.
The build fail since the default choice "Link to Application" (which require
libpcap) is used.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While bumping to v2.4.0, the sha256 was commented by mistake
and the hash was for v2.3.2 archive.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change removes the fetchmailconf.py python module when the python
interpreter is python-3, because this module is not yet python-3
compliant.
Fixes:
http://autobuild.buildroot.org/results/700/7009445dd116a1c02db82a351d38db44db8dad16/
...
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5.6 2.5.0 YES OK (4)
arm_versatile 4.6.1 2.5.0 YES OK
arm_vexpress 4.6.1 2.5.0 YES OK
m68k_mcf5208 4.6.1 2.5.0 YES OK
m68k_q800 4.6.1 q800-v2.4.0 NO (3) OK
microblazebe 4.6.1 2.5.0 YES OK
microblazeel 4.6.1 2.5.0 YES OK
mips64el_malta 4.6.1 2.5.0 YES OK
mips64_malta 4.6.1 2.5.0 YES OK
mipsel_malta 4.6.1 2.5.0 YES OK
mips_malta 4.6.1 2.5.0 YES OK
ppc_g3beige 4.6.1 2.5.0 YES OK
ppc_mpc8544ds 4.6.1 2.5.0 YES OK
ppc_virtex_ml507 4.6.1 2.5.0 NO OK
ppc64_pseries 4.6.1 2.5.0 YES OK
sh4 4.6.1 2.5.0 YES OK
sh4eb 4.6.1 2.5.0 NO (1) OK
sparc_ss10 4.6.1 2.5.0 YES OK
sparc64_sun4u 4.6.1 2.5.0 YES OK
sparc_sun4u 4.6.1 2.5.0 YES OK
x86 4.6.1 2.5.0 YES OK
x86_64 4.6.1 2.5.0 YES OK
xtensa_lx60 4.6.1 2.6.0 YES OK (2)
xtensa_lx60_nommu 4.6.1 2.6.0 YES OK (2)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - Linux 4.5/4.6 doesn't work with older Qemu versions
(3) - There's a network interface, but enabling it in qemu fails
(4) - Console looks dead in 4.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested using this defconfig:
BR2_bfin=y
BR2_PACKAGE_P7ZIP=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It now requires 3.12.x series headers so adjust the dependencies to
match.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
WNPA-SEC-2016-29 - The SPOOLS dissector could go into an infinite loop.
WNPA-SEC-2016-30 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-31 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-32 - The UMTS FP dissector could crash.
WNPA-SEC-2016-33 - Some USB dissectors could crash.
WNPA-SEC-2016-34 - The Toshiba file parser could crash.
WNPA-SEC-2016-35 - The CoSine file parser could crash.
WNPA-SEC-2016-36 - The NetScreen file parser could crash.
WNPA-SEC-2016-37 - The Ethernet dissector could crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
VC4 is a DRM driver.
Signed-off-by: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only enabled on a subset of known-working architectures.
It fails to build on some archs, like blackfin.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- Add comment about the Blackfin exception.
- Propagate the Blackfin exception to the Config.in comment.
- Fix the license, it is the LGPLv2.1+ *with* the unRAR restriction.
- Use $(INSTALL) -D -m 0755 to install the binary instead of cp.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The module description can be found in the release notes of v1.61.0:
http://www.boost.org/users/history/version_1_61_0.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Code is otherwise compiled with sparcv9 optimization and
cannot be run on sparc32 (sparcv8) machine.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Codescape toolchain uses a sysroot layout that places them
side-by-side instead of nested like multilibs. A symlink is needed much
like for the nested sysroots which are handled in copy_toolchain_sysroot
but there is not enough information in there to determine whether the
sysroot layout was nested or side-by-side.
For the above reason plus the fact that this is the only toolchain
needing this, better to handle that symlink creation using a hook which
will be executed only when that toolchain is selected.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 9a1e9efe26.
Currently Codescape toolchains cannot be used to generate a big endian
root file system because the support for side by side sysroots is not
complete.
There is a patch [1] waiting in the queue which fixes the issue for the
current version of Codescape toolchains we have, but it will not work
for the next one that is coming. So, instead of messing more with the
toolchain infra I think it's better to handle these specific Codescape
toolchain's weirdness in hooks which won't affect others.
[1]: http://patchwork.ozlabs.org/patch/571708/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We directly running this script, so it should start with a sha-bang (not
sure why/how it works today...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix several issues regarding the support for Flat Image Trees (FIT).
- Add a patch to really allow turning FIT support on/off, which was not
possible due to bugs in the code and in the tools Makefile. This patch
has been sent upstream but not applied there, yet.
- Use independent options to control FIT support on host and target
packages.
- Subordinate FIT signature support to the activation of FIT support, in
the target package, not to mkimage installation.
- Add a dependence on the dtc utilities because mkimage needs it when
FIT is enabled; otherwise mkimage fails like this:
$ mkimage -f firmware.its firmware.im
sh: dtc: command not found
- Add BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT to the
Config.in.legacy file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When that was added (in 975e30b, fs/squashfs: fix image file
permissions), the reasons were not quite explicit.
We are now forcing the umask, and various tests have shown that the mode
on the generated image file are correct without the chmod.
Remove it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can now properly use multi-line commands, so use that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the squashfs image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the jffs2 image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the newly-introduced PRINTF macro to generate printf formats
that do "The Right Thing (TM)".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
