The commit 720893b625 "openssl: disable
apps for NOMMU" prevented the openssl binary from being built without
MMU in order to fix a build failure without fork(). However, openssl is
designed to support the lack of fork() with -DHAVE_FORK=0, so allow the
openssl binary to be enabled without MMU thanks to this option.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original package supported python on target, now we just use
it as part of the host tools. The license was also mis-assigned.
[Thomas: add removed option to Config.in.legacy.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide a flashing helper to properly select the sam-ba configuration
and reuse the sam-ba tcl script provided by Atmel with minimal
modifications.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency, rename atmel_xplained_defconfig to
atmel_sama5d3_xplained_mmc_defconfig as this configuration supports
booting the sama5d3 Xplained with an MMC card (as opposed to the NAND
flash).
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This supports:
- sama5d31ek
- sama5d33ek
- sama5d34ek
- sama5d35ek
- sama5d36ek
with or without the PDA4 or PDA7 screens.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use kernel (3.18) and u-boot (2015.01) from Atmel's repositories.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have a sanitised set of defconfig files, and we no longer
support non-DT setups, update and simplify the board readme file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we no longer have a non-DT defconfig, and we no longer want to
advertise such a possibility (non-DT is being phased out), just rename
the DT-enabled defconfig file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The RPi is slowly but surely dropping support for booting without a DTB,
so just ditch our old defconfig now that we have up-to-date DT-enabled
defconfigs for all RPi models (save for the compute module).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version (4.0.y); build an in-tree DTB.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update to the latest stable kernel version; build an in-tree DTB; use
a in-tree defconfig; enable C++ (to match what we have in the non-DT
variant); do not install DTB overlays (this minimalist config does not
make use of them).
Generate the DTBs for both the "original" variant (A and B) and the
"Plus" variant (A+ and B+).
Drop our custom linux defconfig file now we use an in-tree one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix a typo in the monkey package - should be MONKEY_CONF_OPTS
instead of MONKEY_CONF_OPT.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Include commit ec6cc07f which fixes an issue causing build failures
on several architectures.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following commit 36555b4c8d ("ARC:
switch to RC1 of upcoming arc-2015.06 tools"), the binutils package
only contains the hash information for the 2015.06-rc1 ARC version of
binutils (which is in fact no hash). However, when an external
toolchain is used, and binutils is built for the target, it's still
the old 2014.11 binutils version that gets used in binutils.mk,
causing a build failure because there is no hash available for this
version.
This commit fixes that by using 2015.06-rc1 as the default binutils
version on ARC, which is used when no host-binutils has been built.
Fixes:
http://autobuild.buildroot.org/results/8f7/8f772e6fccb4f918120a7bb814da2224432d1c09/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some reason, the hash file added in commit
ee6c9f5a1b by Gustavo turns out to be
wrong, so this commit replaces it with the proper hash, also added
after checking the GPG signature.
While at it, we switch to using a .bz2 tarball.
Fixes:
http://autobuild.buildroot.org/results/c44/c441f35119191f47dd5fae96fd76827024e50329/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Monkey is a small, fast and lightweight open source Web Server for
GNU/Linux. It has been designed with focus in embedded devices,
therefore its scalable by nature having a low memory and CPU
consumption and an excellent performance.
[Thomas:
- Add missing dependency on !BR2_STATIC_LIBS (the source code uses
dlopen) and BR2_USE_MMU (the source code uses fork)
- Slightly adjust/reword the description of the
BR2_PACKAGE_MONKEY_SHARED option.
- Remove all the complicated installation logic for the target, and
just use "make install" instead.
- Pass --no-backtrace when uClibc is used, otherwise the build fails
because <execinfo.h> is not available in uClibc.
- Pass $(TARGET_CONFIGURE_OPTS) in the environment of the configure
script., otherwise monkey gets built for the host and not for the
target.
- Add a post install target hook to remove a broken symlink
libmonkey.so installed by Monkey's Makefile when the shared
library is not enabled.
- Use TARGET_MAKE_ENV when calling make, just because we should.
- Pass --malloc-libc so that the libc malloc() is used instead of
the builtin jemalloc allocator, which requires more work to
cross-compile properly.
- Add missing empty line after the .mk header and before the first
variable definition.]
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Misc fixes and improvements all over the place...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, Buildroot does not support building the overlays that are
bundled in the Linux kernel, so all we can do is install the ones
pre-built in rpi-firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The binary .dtb files are not suitable for everyone as they are
kernel-version specific.
Reintroduce BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS option.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
[yann.morin.1998@free.fr: don't install DTBs if kernel builds
its own; fix default; rephrase help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump to version 221
- Update hash file
- Add --disable-gnuefi to configure options to avoid a failure like this
one:
checking for /usr/lib/gnuefi/elf_ia32_efi.lds... configure: error:
cannot check for file existence when cross compiling
- Remove gudev logic since it has been removed from the systemd tree and
it is now an external project.
Announcement URL:
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033170.html
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable the target qemu for aarch64 since it works just fine.
Only tested using userland CPU emulation (no HYP) with a
qemu_aarch64_virt_defconfig image inside a qemu_aarch64_virt_defconfig
instance.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fix some build failures,
see https://github.com/arsv/perl-cross/issues/17
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches refreshed to apply with no shift or fuzz.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bin path for nginx is configured for /usr/sbin, so deleting
the nginx.old back-up from /usr/bin never works. Fix path, and
also use "$(RM)" instead of "-$(RM)", as "rm -f" never fails.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With following blackfin toolchains
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2
when BR2_BINFMT_FDPIC=y
../usr/include/bits/elf-fdpic.h: In function 'void* __reloc_pointer(void*, const elf32_fdpic_loadmap*)':
../usr/include/bits/elf-fdpic.h:95: error: invalid use of 'void'
code snippet at line 95 in elf-fdpic.h
-------------------------------------------------------
unsigned long offset = p - (void*)map->segs[c].p_vaddr;
-------------------------------------------------------
void pointer addition and subtraction is not allowed in C++ as it has undetermined size,
however in C with language extension it is possible because sizeof void is treated
as one byte.
This is toolchain-specific issue. So disable package on these external toolchains.
fixes:
http://autobuild.buildroot.net/results/c70/c704c70ae2f066f85dd6a5fa6a73789bc358d368/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
when BR2_STATIC_LIBS=y
src/symbolize.cc:110:19: error: dlfcn.h: No such file or directory
glog requires dlfcn.h header. So add dependency on dynamic library
fixes:
http://autobuild.buildroot.net/results/75d/75d17ceb764c2c1136047c089a0c554770ca98a4/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 3.4.x vendor specific kernel, which allows to use
the Mali 3D acceleration for OpenGL support.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new defconfig for the Olimex A20 OLinuxino Lime
board, based on the 4.x mainline kernel.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to allow other packages to easily select libaio without
duplicating its complicated architecture dependencies, this commit
introduces a BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS blind option.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
previously, this library was a part of sunxi-mali
[Thomas: add missing comment about the glibc dependency.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
