For a shared-only build, do not create the symlinks to the static
libraries, since they do not exist.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No need to duplicate the host-pkgconf dependency on the Qt case, we
already depend on it in the general case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In case the libgcrypt development files are present on the host system,
collectd's ./configure will mistakenly try to use them and will call the
host system's libgcrypt-config, thus leading it to use path to the host
system includes and libraries.
Fix that in two ways:
- explicitly disable libgcrypt support when libgcrypt is not enabled;
- pass the complete path to libgcrypt-config when libgcrypt is enabled.
However, collectd's configure.ac is utterly broken. The code in
configure.ac has special code to check for libgcrypt-config, and use
whatever is provided via --with-libgcrypt=/path/to/libgcrypt-config. But
that is promptly forgotten because they then call the AM_PATH_LIBGCRYPT
macro, that just does it all again from scratch, and does not use the
value previously found.
Instead, we set LIBGCRYPT_CONFIG in the environment and point it to our
own libgcrypt-config.
Should fix numerous build issues:
http://autobuild.buildroot.net/results/ad4/ad408aef5fb92fe9e031c7dbaf6999776b40ace4/http://autobuild.buildroot.net/results/967/96735bfa91bcf2e3dff89f69c0a12ed406e9efb9/
...
http://autobuild.buildroot.net/results/3bd/3bdd9bdffb1d55414787d38fc2656d7a3391a957/
...
(the first two are with the paranoid wrapper, the third one was before
the paranoid wrapper.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable run test for pthread detection.
In case of build with only static library, CMake fails to detect the
pthread library (-lpthread), so it falls back trying to link using
-pthread and execute the test program.
<snip>
[...]
-- Looking for include file pthread.h
-- Looking for include file pthread.h - found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - not found
-- Check if compiler accepts -pthread
CMake Error: TRY_RUN() invoked in cross-compiling mode, please set the following cache variables appropriately:
THREADS_PTHREAD_ARG (advanced)
For details see /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/TryRunResults.cmake
-- Check if compiler accepts -pthread - no
-- Found Threads: TRUE
-- Udev rules not being installed, install them with -DINSTALL_UDEV_RULES=ON
-- Building with kernel driver detaching disabled, use -DDETACH_KERNEL_DRIVER=ON to enable
-- Building for version: 0.5.3 / 0.5.3
-- Using install prefix: /usr
-- Configuring incomplete, errors occurred!
See also "/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeOutput.log".
See also "/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeError.log".
</snip>
Here it fails because, in the CMake FindThreads.cmake file, the
'try_run' function is unconditionally called [1].
Also, the CMakeError.log gives more details why linking with -lpthread
fails:
<snip>
[...]
Run Build Command:"/usr/bin/make" "cmTryCompileExec3012181287/fast"
make[1]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/usr/bin/make -f CMakeFiles/cmTryCompileExec3012181287.dir/build.make CMakeFiles/cmTryCompileExec3012181287.dir/build
make[2]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_progress_report /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp/CMakeFiles 1
Building C object CMakeFiles/cmTryCompileExec3012181287.dir/CheckFunctionExists.c.o
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -DCHECK_FUNCTION_EXISTS=pthread_create -o CMakeFiles/cmTryCompileExec3012181287.dir/CheckFunctionExists.c.o -c /home/buildroot/instance-1/output/host/usr/share/cmake-3.0/Modules/CheckFunctionExists.c
Linking C executable cmTryCompileExec3012181287
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec3012181287.dir/link.txt --verbose=1
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -DCHECK_FUNCTION_EXISTS=pthread_create -static CMakeFiles/cmTryCompileExec3012181287.dir/CheckFunctionExists.c.o -o cmTryCompileExec3012181287 -rdynamic -lpthread -Wl,-Bstatic -lusb-1.0 -Wl,-Bdynamic
/home/buildroot/instance-1/output/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libpthread.a(init.os): In function `__pthread_initialize_minimal':
init.c:(.text+0x270): undefined reference to `__libc_setup_tls'
collect2: error: ld returned 1 exit status
CMakeFiles/cmTryCompileExec3012181287.dir/build.make:89: recipe for target 'cmTryCompileExec3012181287' failed
make[2]: *** [cmTryCompileExec3012181287] Error 1
make[2]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
Makefile:118: recipe for target 'cmTryCompileExec3012181287/fast' failed
make[1]: *** [cmTryCompileExec3012181287/fast] Error 2
make[1]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
Determining if compiler accepts -pthread returned PLEASE_FILL_OUT-FAILED_TO_RUN instead of 2. The compiler had the following output:
Change Dir: /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp
Run Build Command:"/usr/bin/make" "cmTryCompileExec1361818630/fast"
make[1]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/usr/bin/make -f CMakeFiles/cmTryCompileExec1361818630.dir/build.make CMakeFiles/cmTryCompileExec1361818630.dir/build
make[2]: Entering directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_progress_report /home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp/CMakeFiles 1
Building C object CMakeFiles/cmTryCompileExec1361818630.dir/CheckForPthreads.c.o
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -o CMakeFiles/cmTryCompileExec1361818630.dir/CheckForPthreads.c.o -c /home/buildroot/instance-1/output/host/usr/share/cmake-3.0/Modules/CheckForPthreads.c
Linking C executable cmTryCompileExec1361818630
/home/buildroot/instance-1/output/host/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTryCompileExec1361818630.dir/link.txt --verbose=1
/home/buildroot/instance-1/output/host/usr/bin/arm-linux-gcc -pipe -Os -static -static CMakeFiles/cmTryCompileExec1361818630.dir/CheckForPthreads.c.o -o cmTryCompileExec1361818630 -rdynamic -pthread
make[2]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
make[1]: Leaving directory '/home/buildroot/instance-1/output/build/librtlsdr-v0.5.3/CMakeFiles/CMakeTmp'
</snip>
While falling back on -pthread is correct when using only static
libraries to get some tls-related macros defined [2,3], it is wrong to
try to run the test program in case of cross-compilation.
So, this patch only disable run test when pthread support is done using
-pthread, i.e. in case of the type of libraries is "static only".
Fixes:
http://autobuild.buildroot.org/results/26c/26cb8c2e5f867d49451f61304bf0a1a6f7b825d9/
[1] http://www.cmake.org/gitweb?p=cmake.git;a=blob;f=Modules/FindThreads.cmake;h=a0bc4d133eb3f9d3ae096f0e03e419ef7be66ce8;hb=HEAD#l84
[2] http://lists.busybox.net/pipermail/buildroot/2014-June/100690.html
[3] http://stackoverflow.com/questions/23250863/difference-between-pthread-and-lpthread-while-compiling
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Makefile is hardcoded for /usr/include/ncurses, so override it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Romain Naour <romain.naour@openwide.fr>
Changeset f1d3e09 (Build shared libraries only as the default) broke the
nmap package.
nmap builds an internal version of libdnet, and tries to statically link
against it. Of course, this breaks for shared-only builds, since in that
case there is no static lib ever built.
Using an external libdnet is not really an option:
- libdnet comes from dnprogs, from the linux-decnet project;
unfortunately, their build-system is not amenable to
cross-compilation, and is a real pain to deal with;
- nmap's bundled libdnet is anyway heavily modified, which precludes
using an external libdnet.
Fix that by considering libdnet to be a purely internal library, and by
configuring it with --enable-static, always.
nmap's ./configure uses AC_CONFIG_SUBDIRS() to configure the libdnet
sub-directory; AC_CONFIG_SUBDIRS() calls ./configure in all the
sub-directories it is passed as arguments. Unfortunately, it is not
possible to specify extra ./configure arguments whith AC_CONFIG_SUBDIRS.
We are using an autoconf trick, which is, when configuring
sub-directories with AC_CONFIG_SUBDIRS(), it will first try to execute
configure.gnu if it exists, before it fallbacks to running plain
configure. See:
https://www.gnu.org/software/autoconf/manual/autoconf.html#Subdirectories
So, we provide a configure.gnu that is just a wrapper around the real
configure, which sole purpose is to append --enable-static when calling
the real configure.
Note1: since this libdnet is considered a purely internal library, we
also always pass --disable-shared, since it is not needed at all.
Note2: since this libdnet is considered a purely internal library, it
should not be exposed to other packages, and thus nmap does not install
it, neither in target nor in staging, neither static nor shared, which
is what we want.
[Peter: explain why post-patch hook is used]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changeset f1d3e09 (Build shared libraries only as the default) broke the
berkeleydb package.
For some reason, we had a very strange post-configure action in bdb:
$(SED) 's/\.lo/.o/g' $(@D)/build_unix/Makefile
This means that it is using non-libtool object files. This breaks
building shared-only.
This code has been present almost the whole time we've had a berkeleydb
package, that is:
- November 2003: use a sed expression instead of perl
- March 2003 : use a perl program
- August 2002 : introduce berkeleydb
Getting rid of this sed expression fixes the build, and allows building
the three new static/shared combinations: static only, shared only,
both static and shared.
Fixes numerous build failures:
http://autobuild.buildroot.net/results/b41/b41e13ec6c13830667770b3731f8990062f202bd/http://autobuild.buildroot.net/results/925/925433ef505b190aa5ac83c23e9359afe4b21829/http://autobuild.buildroot.net/results/9af/9afa0dd835af079411a2ea5d94e5e4db7c993111/
...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erlang/OTP 17.4 is a service release on the 17 track with mostly bug
fixes, but it does contain a number of new features and characteristics
improvements as well.
Some highlights of the release are:
- eldap: Nearly all TCP options are possible to give in the
eldap:open/2 call.
- ssh: Added API functions ptty_alloc/3 and ptty_alloc/4, to allocate a
pseudo tty.
- ssl: Handle servers that may send an empty SNI extension to the client.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other init scripts in Buildroot use start()/stop() instead of
do_start()/do_stop(), so change it here as well for consistency
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other init scripts in Buildroot use start()/stop() instead of
do_start()/do_stop(), so change it here as well for consistency
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other init scripts in Buildroot use start()/stop() instead of
do_start()/do_stop(), so change it here as well for consistency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have clear options for the three cases of shared only,
static only and shared+static, let's use them in ncurses to pass the
appropriate --{with,without}-{shared,normal} options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit turns the single static option into a choice, which offers
various possibilities:
1. Build and use static libraries only;
2. Build both shared and static libraries, but use shared libraries;
3. Build and use shared libraries only.
On most platforms, (2) is currently the default, and kept as the
default in this commit. Of course, on certain platforms (Blackfin,
m68k), only option (1) will be available.
In addition to the introduction of the Config.in options, this commit
also:
* Removes the 'select BR2_STATIC_LIBS' from 'BR2_BINFMT_FLAT', since
with the use of a choice, we are guaranteed that BR2_STATIC_LIBS
will be selected when the binary format is BR2_BINFMT_FLAT, since
BR2_STATIC_LIBS will be the only possible solution in the choice.
* Changes package/Makefile.in to use the proper
--{enable,disable}-{shared,static} options for autotools packages.
[Thomas: remove useless empty newline right after 'choice'. Noticed by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- add BR2_USE_MMU dependency, since fork() is used
- rename do_start() and do_stop() to just start() and stop(), as we
do in most init scripts in Buildroot.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of repeating the check in our download rules, delegate the check
of the hashes to the download wrapper.
This needs three different changes:
- add a new argument to the download wrapper, that is the full path to
the hash file; if the hash file does not exist, that does not change
the current behaviour, as the existence of the hash file is checked
for in the check-hash script;
- add a third argument to the check-hash script, to be the basename of
the file to check; this is required because we no longer check the
final file with the final filename, but an intermediate file with a
temporary filename;
- do the actual call to the check-hash script from within the download
wrapper.
This further paves the way to doing pre-download checks of the hashes
for the locally cached files.
Note: this patch removes the check for hashes for already downloaded
files, since the wrapper script exits early. The behaviour to check
localy cached files will be restored and enhanced in the following
patch.
[Thomas: fix minor typo in comment.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of repeating the same test again and again in all our download
rules, just delegate the check for an already downloaded file to the
download wrapper.
This clears up the path for doing the hash checks on a cached file
before the download.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of relying on argument ordering, use actual options in the
download wrapper.
Download backends (bzr, cp, hg...) are left as-is, because it does not
make sense to complexify them, since they are almost very trivial shell
scripts, and adding option parsing would be really overkill.
This commit also renames the script to dl-wrapper so it looks better in
the traces, and it is not confused with another wrapper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the host variant of packages, we normally only build the shared
libraries. However, ncurses uses non-standard options to select
between shared/static and therefore the host variant was building both
of them, even though the static libraries were unused.
By passing --without-normal, we disable the build of static
libraries. It saves a bit of disk space, and on my laptop,
host-ncurses takes 26 seconds to build instead of 40 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
glibc-2.20 includes some changes to the include/features.h file
introduced by this commit:
https://sourceware.org/git/?p=glibc.git;a=commit;h=ade40b10ff5fa59a318cf55b9d8414b758e8df78
Those changes make libsvgtiny fail because some warnings are thrown and
the build system is using the -Werror option. We disable this to be able
to build it, or otherwise we will see errors like this one:
GPERF: src/colors.gperf
COMPILE: build-Linux-Linux-release-lib-static/src_colors.c
In file included from
/br/output/host/usr/mipsel-buildroot-linux-gnu/sysroot/usr/include/string.h:25:0,
from src/colors.gperf:16:
/br/output/host/usr/mipsel-buildroot-linux-gnu/sysroot/usr/include/features.h:148:3:
error: #warning "_BSD_SOURCE and _SVID_SOURCE are deprecated, use
_DEFAULT_SOURCE" [-Werror=cpp]
and this one:
In file included from src/colors.gperf:18:0:
/home/ldap/vriera/work/mips-buildroots/mips32/output/build/libsvgtiny-12121/src/svgtiny_internal.h:71:0:
error: "strndup" redefined [-Werror]
Fixes:
http://autobuild.buildroot.net/results/3dd/3dd700405055750262738f867eb5aa08531f5781/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libuv has moved to github.com/libuv/libuv
[Thomas: fix Config.in help text, as noticed by Baruch.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a Config.in option to the "Build options" submenu to
enable paranoid checking of unsafe paths. This mechanism is added as
an option so that when we'll enable it in the autobuilders, people
trying to reproduce the build failures will be able to do so by just
downloading the configuration file. If instead we were leaving this
feature as an environment variable, everyone would have to remember to
pass this environment variable to reproduce build issues. And certain
build issues triggered by paranoid unsafe patch checking may not be
visible in the build output, for example when they happen during the
execution of configure scripts.
Since this option is fairly advanced, a new submenu inside "Build
options" is created, for Advanced options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit enables the poison system directories option, which is now
available thanks to the binutils patches that have been added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit enables the poison system directories option, which is now
available thanks to the gcc patches that have been added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.7.4, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc arc-2014.08,
and modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH
environment variable to error out instead of just warn when unsafe
paths are used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.8.3, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.9.1, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to binutils borrowed from CodeSourcery/Yocto
that warns about unsafe library paths (i.e /usr/lib, /usr/local/lib,
etc.). The patch was adapted to binutils arc-2014.08, and modified to
support the BR_COMPILER_PARANOID_UNSAFE_PATH environment variable to
error out instead of just warn when unsafe paths are used. Even though
erroring out can be chosen by passing
--error-poison-system-directories, we are not sure this option in
LDFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to binutils borrowed from CodeSourcery/Yocto
that warns about unsafe library paths (i.e /usr/lib, /usr/local/lib,
etc.). The patch was adapted to binutils 2.22, and modified to support
the BR_COMPILER_PARANOID_UNSAFE_PATH environment variable to error out
instead of just warn when unsafe paths are used. Even though erroring
out can be chosen by passing --error-poison-system-directories, we are
not sure this option in LDFLAGS will always be passed, so having an
environment variable guarantees it will always be passed, and also
allows to have an identical behavior to the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to binutils borrowed from CodeSourcery/Yocto
that warns about unsafe library paths (i.e /usr/lib, /usr/local/lib,
etc.). The patch was adapted to binutils 2.23, and modified to support
the BR_COMPILER_PARANOID_UNSAFE_PATH environment variable to error out
instead of just warn when unsafe paths are used. Even though erroring
out can be chosen by passing --error-poison-system-directories, we are
not sure this option in LDFLAGS will always be passed, so having an
environment variable guarantees it will always be passed, and also
allows to have an identical behavior to the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to binutils borrowed from CodeSourcery/Yocto
that warns about unsafe library paths (i.e /usr/lib, /usr/local/lib,
etc.). The patch was adapted to binutils 2.24, and modified to support
the BR_COMPILER_PARANOID_UNSAFE_PATH environment variable to error out
instead of just warn when unsafe paths are used. Even though erroring
out can be chosen by passing --error-poison-system-directories, we are
not sure this option in LDFLAGS will always be passed, so having an
environment variable guarantees it will always be passed, and also
allows to have an identical behavior to the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Also remove the install hook, all static libraries are
removed from TARGET_DIR/usr/lib by target-finalize target
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove useless --without-glib option, as noticed by Vincent.]
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Uses pkgconfig since 1.16.1+ to find libraries.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Install poppler's header files and libraries into staging, since it
provides a library that can be used by other packages.
[Thomas: slightly extended the commit message.]
Signed-off-by: Alan Ott <alan@signal11.us>
Suggested-by: Jeremie Scheer <jeremie.scheer@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to build the libpoppler-qt4 library.
[Thomas: slightly adjust the Config.in file, by:
- Using an if BR2_PACKAGE_POPPLER ... endif block instead of a depends
on BR2_PACKAGE_POPPLER for the new option.
- Rewording the option prompt, since there's no need to indicate that
the Qt support is for poppler since we're already a sub-option of
poppler.]
Signed-off-by: Alan Ott <alan@signal11.us>
Suggested-by: Jeremie Scheer <jeremie.scheer@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge
Description in uClibc for this optoin is:
--->---
bool "Use faster (but larger) generic string functions"
default y
help
Answer Y to use the (tweaked) glibc generic string functions.
In general, they are faster (but 3-5K larger) than the base
uClibc string functions which are optimized solely for size.
Many people will answer Y.
--->---
Additional 3-5K of size is not that important if resulting libuClibc.so is
of size about 300k.
But benefits in terms of performance could be pretty significant.
For example on ARC in LMbench we see more than 3 times bump in some tests
--->---
libc bcopy unaligned
...
8.39 - 6.76 (UCLIBC_HAS_STRING_GENERIC_OPT=no)
8.39 - 23.86 (UCLIBC_HAS_STRING_GENERIC_OPT=yes)
--->---
Also since the option in question is default in uClibc I don't expect if
enabled back (it was silently disabled in http://git.buildroot.net/buildroot/commit/?id=cfbf8abc33d86a0cf5c1bb3e0817a22009b7f301 on introduction of NPTL in uClibc
by Khem Raj) it to introduce problems.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <anton.kolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is rarely needed by packages, but convenient to have when it is.
[Thomas:
- don't define ARM_VARIANT as this name is too global, use
CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT instead.
- don't use ifndef, but a more traditional else clause, for the
non-ARM cases.]
Signed-off-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now uses hwdb from libudev for usb information.
Drop all redundant/obsolete dependencies and cleanup hooks.
Don't install to staging, it's pointless, it provides no libraries at
all and it doesn't bundle usb.ids any more.
[Thomas: change 'comment' in Config.in to match what's recommended in
the Buildroot manual.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Doing this we ensure that only the static library and a static version
of slsh are built.
Fixes:
http://autobuild.buildroot.net/results/f12/f124ca3737baf5aca32029226805133d3544715c/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These are adapted upstream patches to make them apply on the version we
are using in Buildroot, and also taking into account that we already
have another patch which modifies the same file, so these patches would
not apply as they are. Unnecessary parts of the upstream patches have
been ingnored, such as changelogs or version changes.
The purpose of these patches are allowing the static library and a
static version of slsh be built without building any dynamic bit.
These patches will be included in the next release, so we can remove
them when we do the next version bump.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tutorials don't pass pedantic mode hence causing failures.
And we don't care about tutorials anyway, disable them to save time as
well. Fixes.
http://autobuild.buildroot.net/results/f68/f68d537e623f565000ca966372a7c0277f4e3888/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, the OSS support is enabled, which may not necessarily be
useful on most Linux systems that use ALSA.
[Thomas: tweak commit title and log.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable support for neighbor discovery useful in Samba and UPnP networks.
[Thomas: add dependency on smbclient or upnp plugin, without which the
neighbor discovery support isn't very useful.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make help text lines not longer as 80 characters (one tab weights
eight chars).
[Thomas: rewrap more help text.]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make the package name uppercase to be consistent in all the help texts.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix little type: it's UPnP, not UPnp.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove dependency on python || python3, as we did for all other
python modules that work with both Python 2 and Python 3.
- Rewrap help text.
- Add <pkg>_LICENSE_FILES value.]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using the config option '--libdir=/lib' makes the setting of prefix to an
empty path obsolete in MUSL_INSTALL_TARGET_CMDS.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set the installation path for the libraries to /lib instead of /usr/lib.
This fixes an issue when building a toolchain with the musl library by
the internal toolchain backend of Buildroot in the first step and import this
toolchain later as a custom external toolchain in a second step. For this use
case check-musl in toolchain/helpers.mk failed because it did not find the
libc or libm in sysroot/lib.
This patch superseeds: [PATCH 1/1] toolchain/helpers.mk: fix check-musl
http://patchwork.ozlabs.org/patch/417587/
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-8500 - A flaw in delegation handling could be exploited
to put named into an infinite loop, in which each lookup of a name
server triggered additional lookups of more name servers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lighttpd modules support code requires shared libraries support.
The scons based build system seems to be support static link of modules, but
we currently don't use scons for lighttpd.
Fixes:
http://autobuild.buildroot.net/results/39c/39c027bf6b76a0f9c15a184f449dadacfaefe980/
[Peter: move to top of file to fix indentation of sub options]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the bump of the thrift package, it makes sense to bump the
python-thrift package as well. Python 3 is still not supported
apparently, so we keep this package a Python 2 only one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop patches that are upstream.
Add hash file.
Tweak autoreconf patch since README is now missing as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This update requires a few changes. First, good news, the patches that you
guys have submitted to OLA have been merged, so we can drop those:
ola-0001-fix-build-warning.patch -> ea375582b0bfee93d66608ffc807078ffc48e961
ola-0002-move-python-sub-check-to-configure.ac.patch -> 673a7602a6bf7a6aa8a8461ebd9362d59f6e21df
ola-0003-fix-check-for-python-module-for-cross-compilation.patch -> b51b48be81ec38bc7d1229be0c7d3189c5ddbafa
Less good news: OLA now builds a small protoc wrapper (ola_protoc) that is
built and executed at compile-time on the host. If we don't change anything,
ola_protoc is built with the target toolchain and therefore can't run on the
host. Explanation for ola_protoc is here
To solve this, I created a package host-ola, which builds and provides an
ola_protoc for the host. It tries to disable as much as possible of things
that we won't need at configure time. Only ola_protoc is built and installed
so it's not that long.
The change has been built-tested only.
[1] https://github.com/OpenLightingProject/ola/blob/master/protoc/ola-protoc.cpp#L20
[Thomas:
- add HOST_OLA_DEPENDENCIES variable, so that host-ola doesn't get
all the dependencies of the target ola package: certain target ola
dependencies do not have corresponding host packages (and it
doesn't make sense to have them as dependencies just to build
ola_protoc)
- improve the commit log to mention which upstream commits correspond
to our patches.]
Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0003 will be extended to fix the blackfin build as well, therefore
it is renamed according to the fixed variable.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes (or atleast stops the build with a saner description):
http://autobuild.buildroot.net/results/1a9/1a9643f8633db038d4fe5ca4a32e4d52e70a3a1a/
We're using the same sources for host and target downloads, so it makes
sense to use the same <pkg>.hash file as well to ensure the host version
gets verified without us having to maintain a seperate host-<pkg>.hash file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mutt's ./configure looks for different paths for where to look for
incoming mails.
This is absolutely worng in the case of cross-compilation, because the
path it may find on the host may not exist on the target.
Not only that, but some host may not even have any of the paths
./configure looks for.
Fix that by specifying the mailpath, and set it to the value documented
in the FHS [0]
Since Buildroot only guarantees /tmp to be writable, make /var/mail a
symlink to /tmp .
[0] http://refspecs.linuxfoundation.org/FHS_2.3/fhs-2.3.html#VARMAILUSERMAILBOXFILES
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this, the python support doesn't do anything.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Freescale e5500 and e6500 cores are supported for versions >= 4.8
So filter out all of the older versions to avoid build failures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously NetworkManager had to be enabled and started on the
first boot manually or by a script.
Add install define with the commands to setup the required
service files for automatic start.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream is no longer available, so get the tarball + important patches from
Fedora.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The functionality is included in python3 as the ipaddress module, so make it
python2 only.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 1.5.2
- Add a hash file
[Thomas: fix typo in commit title.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 0.9.0
- Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 2.1.3
- Update the hash value
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libz160 is provided as binary. We need EABI toolchain with glibc to use
it.
[Thomas: adjust dependency comment according to Yann suggestions.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch to allow building wpa_supplicant with the musl C library.
Building wpa_supplicant with the musl C library fails since musl does not
define type names such as '__uint32_t'. To support building wpa_supplicant
with the musl C library use the integer types declared in the ISO C standard
header file <stdint.h>.
Patch is sent upstream:
http://lists.shmoo.com/pipermail/hostap/2014-December/031464.html
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch remove a header inclusion that is not required an can create
build error with some toolchains.
The patch is pushed on the upstream for the next release.
http://dev.exiv2.org/issues/1007
Fixes:
http://autobuild.buildroot.net/results/09d/09d9b525eeee458247e10a7948070c00bbabb964/
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libunwind support in xorg-server is not only broken for MIPS64 n32 but
for all MIPS variants with 32-bit pointers. The reason is exactly the
same one. libunwind defines a uint64 variable to store the words. Then,
xorg-server casts that variable (64-bit) into a pointer (32-bit), and
the compilation fails:
backtrace.c:98:13: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
Related:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Fixes:
http://autobuild.buildroot.net/results/87b/87be2c95957f9925c1258812e536df72689fc5da/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we are using a shell script called genext2fs, that
impersonates the real genext2fs. But that script does much more than
just call genextfs: it also calls tune2fs and e2fsck.
Because it impersonates genext2fs, we can not easily add new options,
and are constrained by the genext2fs options.
But it turns out that, of all the options supported by the real
genext2fs, we only really care for a subset, namely:
- number of blocks
- number of inodes
- percentage of blocks reeserved to root
- the root directory which to generate the image from
So, we introduce a new host package, mke2img, that is intended to
eventually replace genext2fs.sh.
This new script is highly modeled from the existing genext2fs.sh, but
was slightly refreshed, and a new, supposedly sane set of options has
been choosen for the features we need (see above), and some new options
were added, too, rather than relying on the arguments order or
environment variables:
-b <nb-blocks> number of blocks in the filesystem
-i <nb-inodes> number of inodes in the filesystem
-r <pc-reserved> percentage of reserved blocks
* -d <root-dir> directory containing the root of the filesystem
* -o <img-file> output image file
-G <ext-gen> extfs generation: 2, 3, or 4 (default: 2)
-R <ext-rev> ext2 revision: 0 or 1 (default 1)
-l <label> filesystem label
-u <uid> filesystem UUID; if not specified, a random one is used
* Mandatory options
Since the upstream e2fsprogs are expected to release a new mke2fs that
will be able to generate a filesystem image from a directory, we then
will be able to replace all the logic in mke2img, to use mke2fs instead
of the (relatively fragile) combination of the three tools we currently
use.
An entry is added for it in the "Host utilities" menu, so it can be
selected for use by post-{build,image} scripts. The ext2 filesystem
selection is changed to select that now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: re-adjust dependencies, according to Yann's comment.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previous to this patch, if BR2_PACKAGE_DHCP_CLIENT was selected,
dhcpd.service was installed to the target on systemd systems.
On the resultant system, this would mean that systemctl would
show an error starting dhcpd.service, as the requisite files
do not exist. This does not cause issue on sysvinit systems
as the init scripts silently error when the files aren't found.
Fix this by adding a conditional check to the install define.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also remove unneeded sub-shell usage in the build and installation
steps. It is kept for the configure step as it is actually useful, and
works fine because "|| exit 1" is outside the sub-shell.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
- Bump version to 20141122
- Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building the manpages requires xsltproc, which might not be available.
Also, who needs the manpages on the target anyway? ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The nginx AIO support cannot build on arc, because it hardcodes
the usage of SYS_eventfd(), while it should just use eventfd() from
the C library.
Fixes:
http://autobuild.buildroot.org/results/f3e/f3e2c7a937517a5444f8c6cc0b02692af897b3e0/
[Thomas: adjust comment as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CFLAGS and LDFLAGS are already passed as part of
$(TARGET_CONFIGURE_OPTS).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename patch to new standard and add hash file as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed with Thomas
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/100998
only the current toolchains are broken:
"it's better to blacklist the individual toolchains that are known
to be broken, so that if we add another toolchain, we will be able
to see if the same bug happens as well or not."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed with Thomas
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/100998
only the current toolchains are broken:
"it's better to blacklist the individual toolchains that are known
to be broken, so that if we add another toolchain, we will be able
to see if the same bug happens as well or not."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed with Thomas
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/100998
only the current toolchains are broken:
"it's better to blacklist the individual toolchains that are known
to be broken, so that if we add another toolchain, we will be able
to see if the same bug happens as well or not."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xlib_libXau needs pkg-config during the configure phase. Otherwise it
will fail with an error like this one:
checking for XAU... configure: error: in
`/br/output/build/xlib_libXau-1.0.8':
configure: error: The pkg-config script could not be found or is too
old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have to define it as a bool, otherwise kconfig complains with:
package/bdwgc/Config.in:1:warning: config symbol defined without type
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bdwgc has support for a sub-set of the architectures we support.
Since there is roughly a 50-50 split of our architectures that have
support in bdwgc vs. those that do not, use a positive dependency logic,
rather than a negative one.
The list was constructed by visual inspection of the source code of
bdwgc, but the header doing the check is, to say it politely, a bit
difficult to read...
So, some working archotectures may be missing. Users needing it may
investigate if their architectures are indeed supported.
Fixes;
http://autobuild.buildroot.net/results/529/529b0b6dd47744c13f56e59a4c669a3f5d56530d/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Pedro Aguilar <paguilar@paguilar.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
[Peter: use install -D]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
[Peter: fix indentation as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Also, we take this opportunity to rename RSYSLOG_INSTALL_CONF_SCRIPT
to RSYSLOG_INSTALL_CONF because it is no longer installing an init
script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And use the same (0-prefixed) form everywhere.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
[Peter: drop && conditional from watchdog installation as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an "|| exit 1" in the installation loop, otherwise if one of the
file fails to install, the build doesn't abort.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't support installing documentation on the target, so there's no
point in having explicit code to do so.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target-finalize target in the main Makefile removes
$(TARGET_DIR)/usr/share/man entirely, so there's no point in having
some package specific logic to remove man pages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't support installing documentation on the target, so there's no
point in having explicit code to do so.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some custom iostat-source target was mistakenly left in place when the
iostat package was migrated to gentargets in commit
ee77963588, back 4 years ago. This
commit removes this unnecessary custom target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't support installing documentation on the target, so there's no
point in having explicit code to do so.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't support installing documentation on the target, so there's no
point in having explicit code to do so.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target-finalize target takes care of removing
$(TARGET_DIR)/usr/share/man, so there's no point in having package
specific code doing this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't support installing documentation on the target, so there's no
point in having explicit code to do so.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also make sure we use a full path for the destination of the
$(INSTALL) command.
[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also makes the installation of the init script unconditional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also makes the installation of the init script unconditional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also move back the NFS_UTILS_INSTALL_FIXUP hook registration right
after the hook definition.
[Peter: use install -D as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also makes the installation of the init script unconditional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also makes the installation of the init script unconditional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also use a complete destination path for the $(INSTALL) command.
[Peter: use install -D as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the existing STUNNEL_INSTALL_CONF_SCRIPT hook no longer installs
the init script, we rename it to STUNNEL_INSTALL_CONF.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit explicits the permissions with which executables are
installed, and also makes sure that the build is aborted if one of the
binaries cannot be installed, instead of silently ignoring the error.
[Peter: fixop typos in commit message as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We no longer support having documentation on the target, so there's no
point in carrying code to install man pages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We also switch to using a full destination path as the second argument
of $(INSTALL).
[Peter: use install -D as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit changes the radvd to use the <pkg>_INSTALL_INIT_SYSV
mechanism instead of using a post install target hook. We also use a
full destination path when calling $(INSTALL).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Installing manpages to the target is quite useless, since we don't
support installing documentation on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit changes the vsftpd package to use the
<pkg>_INSTALL_INIT_SYSV mechanism to install its init script, and
renames the init script in the Buildroot source tree to match how it's
named on the target.
Also, the init script is now installed unconditionally, as is done in
most packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove the support for generating mips1/2/3/4 code since it has been
deprecated for more than a year now.
Also remove the unnecessary kludges in packages for it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove the fortran and objective C language support since these have
been deprecated since more than a year ago.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow the upstream EOL cycle and mark 3.16 as deprecated for 2015.02.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Download the portability patch into the buildroot tree.
This isn't nice but there really isn't another good solution for it.
The elfutils-portability.patch is version-dependent hence we already
have an older version for an older version of elfutils in the mirrors.
This causes hash check failures when fetching from sources.buildroot.net
But we can't remove (hence replace) the old version with the new one
since this would causee issues with older versions of
buildroot/elfutils for the same scenario.
Fixes:
http://autobuild.buildroot.net/results/26a/26afb92dc14fd0f85c0800dd4e034ea86af19fe2/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Amend the former commit and disable xorg-server with libunwind support
only for MIPS64 n32, as stated in the bug report:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are alredy included in 1.3.1, and should have been dropped when I
merged next.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libuuid needs to be linked with -lintl when gettext is needed (with
locales).
For a shared build, this is solved with the DT_NEEDED ELF tags, but for
a static link, it is not pulled in automatically.
Use pkg-config to find libuuid, instead of AC_CHECK_LIB().
Second part at fixing:
http://autobuild.buildroot.net/results/c46/c467aeec258909bb82eda77123803944f97d8df8/
[Peter: add host-pkgconf to _DEPENDENCIES]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When gettext is needed (with locales), libuuid needs to be linked
against -lintl.
In dynamic link, this is solved via the DT_NEEDED ELF tag, but for
static links, it does not get pulled in automatically.
Fix that by adding a Libs.private section to uuid.pc, but only if
it needed.
First part at fixing:
http://autobuild.buildroot.net/results/c46/c467aeec258909bb82eda77123803944f97d8df8/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because shairport-sync uses AC_CHECK_LIB to find some of the needed
libraries (opensl, alsa, popt...), it fails to bring in the dependencies
of those libraries; for example, -lssl requires -lz.
When doing a dynamically-linked build, those dependent libraries are
pulled in thanks to the DT_NEEDED ELF tags, but those are not available
in static libraries.
Use PKG_CHECK_MODULES instead of AC_CHECK_LIB, and emulate the results
of AC_CJECK_LIB (i.e. set the HAVE_LIBxxx and the LIBS variable
appropriately) to minimise the amount of code touched.
This should fix:
http://autobuild.buildroot.net/results/1a5/1a56dbff3583bed0d693508dfc16859086846ecd/http://autobuild.buildroot.net/results/6d5/6d5a8157592f7a2c9469bf71b0453796ef982ab1/
At the same time, remove a comment at the end of a variable assignment,
since this has proven to cause some problems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <jkrause@posteo.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we set LD_LIBRARY_PATH when building our host tools, we append any
pre-existing value to our custom path:
LD_LIBRARY_PATH="$(HOST_DIR)/usr/lib:$(LD_LIBRARY_PATH)"
But then if LD_LIBRARY_PATH was previously empty, we end up with an
LD_LIBRARY_PATH that ends with a colon.
Also, when we check that an existing LD_LIBRARY_PATH does not contain
CWD, we previously did not look for a zero-length prefix.
Since 'man ld.so' says of LD_LIBRARY_PATH:
A colon-separated list of directories in which to search for ELF
libraries at execution-time. Similar to the PATH environment
variable.
And POSIX states about PATH:
A zero-length prefix is a legacy feature that indicates the current
working directory.
And bash also recognises a zero-length prefix to search in CWD:
A zero-length (null) directory name in the value of PATH indicates
the current directory.
We may thus end up on a system where a zero-length prefix in
LD_LIBRARY_PATH is interpreted as CWD.
Do not append the previous LD_LIBRARY_PATH if it was empty, and check
for a zero-length prefix when checking dependencies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to a bug in makefile logic, monolite libraries path will not
be selected when EXTERNAL_MCS parameter is specified.
Setting EXTERNAL_MCS to a non existent binary, makes the internal logic
to fallback to monolite, setting correctly both binary and
library paths.
This has the benefit to force host-mono to always use monolite as
bootstrap compiler also in case a mono compiler is already installed
on the system.
Fixes:
http://autobuild.buildroot.net/results/fc00952bef03cf3b4785be1a0d9c08dc84aa3f54/
[Peter: add comment explaining why this is done]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reported-by: Rainer Berns <rainer.berns@berns-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
First of two patches to fix
http://autobuild.buildroot.net/results/238/2386edb7f95920e84a35811a33f4333ee0a7a860/
gd links against libiconv if it is already built, depend on libiconv
to get reproducable builds.
readelf output without libiconv present:
$ output/host/opt/ext-toolchain/bfin-linux-uclibc/bin/bfin-linux-uclibc-readelf \
-a output/staging/usr/lib/libgd.a | grep iconv
15: 00000000 12 FUNC GLOBAL HIDDEN 1 _iconv_open
16: 0000000c 12 FUNC GLOBAL HIDDEN 1 _iconv
17: 00000018 12 FUNC GLOBAL HIDDEN 1 _iconv_close
readelf output with libiconv present:
$ output/host/opt/ext-toolchain/bfin-linux-uclibc/bin/bfin-linux-uclibc-readelf \
-a output/staging/usr/lib/libgd.a | grep iconv
000000e4 0000100a R_BFIN_PCREL24 00000000 _libiconv_open + 0
00000140 0000140a R_BFIN_PCREL24 00000000 _libiconv + 0
0000019a 0000160a R_BFIN_PCREL24 00000000 _libiconv_close + 0
16: 00000000 0 NOTYPE GLOBAL DEFAULT UND _libiconv_open
20: 00000000 0 NOTYPE GLOBAL DEFAULT UND _libiconv
22: 00000000 0 NOTYPE GLOBAL DEFAULT UND _libiconv_close
[Peter: also add to LIBS so it ends up in gdlib-config --libs output]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The luajit package is a provider of a lua interpreter, but does not install a
lua executable. This is fine for scripts that explicitly invoke luajit, but
not so good for scripts that just need a lua interpreter and call lua. This
mod creates a lua symlink so that the non-jit-specific scripts will still work.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch forces the use of internal compiler for building mono,
for more information please refer to mono official documentation
(README.md)
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add patch to avoid the enable/disable-debug options from unsetting -g
from CFLAGS in an incorrect way which breaks -mfloat-gprs=X (translit to
-mfloatprs=X).
It's possible to affect other less common CFLAGS with a '-g' in any
position.
Upstream status: sent different patch (configure.ac) - to avoid
autoreconfiguring.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous no-op dhclient-script is useless and in fact can lead
users to believe things will work.
dhclient-script is supposed to, among many other things, bring the
interface up for dhclient to pump an address, set the interface
address, set resolv.conf appropiately and set the default gateway.
It's a complex script since it has to deal with a lot of details so
let's just use the best fit which is the OpenWRT one since it uses the
"legacy" tools (ifconfig, route, ...) which can be easily provided by
busybox and/or net-tools.
There are newer and more feature-complete versions around but they
require full iproute2 ip and wouldn't fit as well with the busybox-only
approach.
License: likely GPLv2+
Source:
http://git.openwrt.org/?p=packages.git;a=blob;f=net/isc-dhcp/files/dhclient-script;h=4afebc0ad20ebac51c5baae5ed01c6713e3a0fd0;hb=HEAD
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2014-8767 - denial of service in verbose mode using malformed OLSR
payload
OLSR payload
CVE-2014-8768 - denial of service in verbose mode using malformed Geonet
payload
CVE-2014-8769 - unreliable output using malformed AOVD payload
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt Webkit Module uses pthread_getattr_np() which is implemented in
toolchains with NPTL. Otherwise the compilation will fail showing this
error message:
wtf/StackBounds.cpp: In member function ‘void
WTF::StackBounds::initialize()’:
wtf/StackBounds.cpp:172:38: error: ‘pthread_getattr_np’ was not declared
in this scope
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt Script Module uses pthread_getattr_np() which is implemented in
toolchains with NPTL. Otherwise the compilation will fail showing this
error message:
../3rdparty/javascriptcore/JavaScriptCore/runtime/Collector.cpp: In
function ‘void* QTJSC::currentThreadStackBase()’:
../3rdparty/javascriptcore/JavaScriptCore/runtime/Collector.cpp:692:42:
error: ‘pthread_getattr_np’ was not declared in this scope
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Somehow busybox thinks debian standards are the rule and installs lspci
to /usr/bin instead of /usr/sbin where upstream says it belongs.
So install pciutils binaries there as well to really win over busybox
PATH-wise and overwrite the little bugger symlink.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
