Register package-specific target-finalize hooks with the
newly-introduced <PKG>_TARGET_FINALIZE_HOOKS.
This incidentally fixes luarocks, which was registering target-finalize
hooks even when it was not enabled.
To be noted, the skeleton package is not converted, because it is not
optional, we always have it; so its hooks would always be registered
anyway. Besides, the followup patches would render this conversion moot
anyway, since those hooks would be spread across the various skeleton
packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, each python package (be it the python interpreter package
itself or external python modules) is responsible for compiling its
.py into .pyc files. Unfortunately, this is not ideal as some packages
only install .py files without compiling them into .pyc files. In this
case, if the Buildroot configuration specifies to keep only the .pyc
files, the .py files are removed and lost.
To address this, this commit changes the logic by making the
compilation of .pyc files a global operation: the python interpreter
packages register a target finalize hook that is in charge of
compiling all installed .py files.
The *.pyc generation on a per package basis is disabled in the
python-package infrastructure by passing the "--no-compile" option to
setup.py.
The *.pyc generation for the Python interpreter internal modules is
disabled through --disable-pyc-build configure option.
A small helper script is used to perform the compilation, the purpose
of this script is to abort the compilation process if one of the .py
file cannot be compiled. It has been provided by Samuel Martin and
integrated into this commit.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
[Thomas:
- rework for python 3.5
- integrate Samuel proposal that allows to detect compilation
failures.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Samuel Martin, this commit adds the option
--no-run-if-empty xargs option to the "find ... | xargs ..." logic used
in the python and python3 target-finalize hooks to remove py/pyc/pyo
files. This ensures that the command doesn't fail if there are no files
matching the pattern.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The major changes in terms of Buildroot packaging are:
- Due to PEP488, Python no longer generates .pyc (unoptimized) and
.pyo (optimized) byte-code files. Instead, it generates <foo>.pyc,
<foo>.opt-1.pyc and <foo>.opt-2.pyc. Therefore, we removed the
--disable-pyo-build option and kept only the --disable-pyc-build
option, which completely disables building all .pyc files. In
addition, since the optimized .opt-X.pyc files don't work if the
corresponding un-optimized .pyc file is not present, we are for the
moment unconditionally removing the optimized ones (keeping both
the unoptimized and optimized ones doubles the required filesystem
size!). So basically we preserve the behavior we had before this
commit:
BR2_PACKAGE_PYTHON3_PY_ONLY -> only *.py
BR2_PACKAGE_PYTHON3_PYC_ONLY -> only non-optimized *.pyc
BR2_PACKAGE_PYTHON3_PY_PYC -> both the *.py and non-optimized *.pyc
To achieve this, the TARGET_FINALIZE_HOOKS are reworked:
PYTHON3_REMOVE_PY_FILES is responsible for removing *.py files in
the BR2_PACKAGE_PYTHON3_PYC_ONLY case.
PYTHON3_REMOVE_PYC_FILES is responsible for removing *.pyc files
in the BR2_PACKAGE_PYTHON3_PY_ONLY case.
PYTHON3_REMOVE_OPTIMIZED_PYC_FILES is responsible for removing the
optimized *.opt-1.pyc and *.opt-2.pyc files, which is done
unconditionally.
- The PEP3147 disabling patch had to be significantly reworked due to
the code having changed heavily. The code was moved into a
_bootstrap_external.py, which is a "frozen" Python module, i.e a
module generated into a .h file at compile time using the
_freeze_importlib program.
- Due to the above, we now need to regenerate importlib.h at build
time. Unfortunately, for the target Python _freeze_importlib is
built for the target, so we can't run it on the build machine. To
fix this, we copy the _freeze_importlib program from the
host-python in $(HOST_DIR), and then patch the target python to use
it. Since the same solution can be used for 'pgen', we do it, and
avoid having to touch the graminit.{c,h} files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Packages built with automake use a `py-compile` helper to byte-compile
Python source files. This script uses the "py_compile" module from the
standard library. In turn, the compile() function in the "py_compile"
module invokes the cache_from_source() function provided by importlib.
This commit adds a new patch named "020-importlib-no-pep3147.patch"
that changes cache_from_source() and source_from_cache() in importlib
to get rid of the "__pycache__" directory.
This commit fixes the following import error in kmod when the module
is built for Python 3:
>>> from kmod import Kmod
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: cannot import name 'Kmod'
Moreover, this commit removes two patches that are no longer necessary
since modifying cache_from_source() and source_from_cache() disables
PEP 3147 for the standard library and distutils / setuptools.
* 004-old-stdlib-cache.patch
* 016-distutils-no-pep3147.patch
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches are simply refreshed, except
002-properly-detect-if-python-build.patch which is removed because an
identical fix has been merged upstream:
e128ea78e5
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like was done for the 'python' package, also make the ossaudiodev
module optional for 'python3'. ossaudiodev is always disabled for
host-python3, and a new option is added to enable it for the target
python3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps python3 to Python 3.4.2. Two patches had to be
changed slightly to fix some minor conflicts.
PYTHON3_LIBTOOL_PATH = NO was added to prevent Buildroot from trying
to patch a version of libtool for which we don't have matching
patches, which isn't a problem since we're anyway not using the part
of the Python sources that uses libtool (it's the built-in copy of
libffi, and we use the external libffi).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
As investigated in bug #7646, wcsftime() doesn't work properly with
uClibc. Until it gets fixed in uClibc, let's tell Python 3 to not use
it. Python 3 will fall back to strftime(), which works properly.
[Peter: fix typo in comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Beyonlo <beyonlo@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the removal of py/pyc files is Python-specific, this commit
moves the logic removing those files to python.mk and python3.mk
respectively.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The __pycache__ directories are only needed on PEP3147-enabled
installations, which is not the choice Buildroot has made. However,
during the build process of the target Python, the separation between
the target and host Python is not entirely complete, and starting the
host Python to byte-compile the target Python modules triggers the
compilation of a bunch of __pycache__ directories by the host Python,
which uses a PEP 3147 installation.
For now, simply get rid of those useless directories after the
installation of Python is completed. In the long term, it would be
good to achieve a better isolation between the host and target build
to avoid this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit makes the decimal module support optional: since Python
3.3 it relies on an external library. The source code of this library
is available built-in as part of the Python sources, but in Buildroot
we generally prefer to use the external library when possible.
To achieve this, this commit adds a patch to Python that is similar to
the one we use for expat support, but this time for the
libmpdec/mpdecimal library.
As a consequence, since mpdecimal now builds properly even when
<fenv.h> is not available (on i386), this commit fixes:
http://autobuild.buildroot.org/results/b64/b64d5c941a7cac00619da3a0696939f86a8eafc2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds support for time.tzset() in Python 2.7 and Python 3.
The Python configure script sets ac_cv_working_tzset to 'no' when
cross compiling, although it should be available and work with all
toolchains supported by Buildroot (?).
The patch below pre-sets the variable so that time.tzset() works.
[Thomas: adjust commit log.]
Signed-off-by: Henry Margies <henry.margies@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A few minor updates on the patches were needed to resolve some
conflicts on the main Makefile.pre.in file, in the list of modules to
build/install.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6251ccf032 ('python3: fix the
value of PYTHON3_PATH') tried to fix the value of PYTHON3_PATH, but
did it incorrectly: it changed PYTHON_VERSION_MAJOR to
PYTHON_VERSION3_MAJOR, while it should have been
PYTHON3_VERSION_MAJOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PYTHON3_PATH was incorrectly referencing the site-packages of
Python 2 packages, due to the usage of PYTHON_VERSION_MAJOR, instead
of PYTHON3_VERSION_MAJOR. This commit fixes that by using the correct
variable, which in our testing fixed the build of python-pyasn against
python3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch reworks the way python3 and python3-config symlink are
installed.
Buildroot wants to control these symlinks' installation:
* the python3 symlink should be unconditionally installed in the target
tree, and the python3-config symlink in the staging tree, since it is
the only python package built and installed in the target tree if the
user selected it;
* the python3 and python3-config symlinks should only be installed in
the host tree when python3 is the selection of the user for the
target.
[Thomas: fix comment as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During installation, host-python and host-python3 run the freshly built
python executable. This is done with a proper LD_LIBRARY_PATH to make
sure it picks up the libpython in the build directory. However, the
python binary has an RPATH pointing to the $(HOST_DIR)/usr/lib.
Therefore, if libpython exists there, it will be used instead.
If the install step is run in parallel, it is possible that libpython
is already partially copied to $(HOST_DIR)/usr/lib when python is run.
This gives an error like:
python: error while loading shared libraries: $(HOST_DIR)/usr/lib/libpython3.4m.so.1.0: file too short
The fix is simple: use RUNPATH instead of RPATH, which allows
LD_LIBRARY_PATH to override RUNPATH. That way, the libpython in the
build directory is always used. RUNPATH is enabled by passing
--enable-new-dtags to the linker.
Fixes e.g.
http://autobuild.buildroot.net/results/2a6/2a62de3247ba5ad273f03d01e690a3eeb11aa7b4
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A confusion was made when applying commit
c3d539b53f ('host python/python3:
conditionally disable unicodedata') and then commit
73293e88c8 ('python, python3: enable
unicodedata for host-python, needed by setuptools').
The first commit added the enabling of unicodedata in the host Python
when the target Python is configured with unicodedata, which is
necessary because building the target unicodedata Python module
requires having unicodedata support in the host Python.
The second commit enabled the unicodedata unconditionally in the host
Python, because it is needed by host-setuptools.
However, when the second commit was applied, the logic that consisted
in disabling unicodedate in the host Python when not needed was kept,
which resulted in breaking the build of host-setuptools due to the
lack of unicodedata support in the host python.
This commit fixes that by only leaving the unconditional
--enable-unicodedata in the host Python configuration options, and
therefore removing the problematic conditional --disable-unicodedata.
Fixes:
http://autobuild.buildroot.org/results/b62/b622fc14776f5a6c26ff0d1fb882f4ae6cccc5d8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python and python3 builds mark libpython as read-only which
prevents it from being stripped out correctly for the target.
Signed-off-by: Przemyslaw Wrzos <przemyslaw.wrzos@calyptech.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@alcatel-lucent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are going to bump setuptools to a much newer version, the host
python needs to be built with support for unicodedata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python package infrastructure will need the Python 3 package to
provide a PYTHON3_PATH environment variable in order to build
third-party Python modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the Python3 package to use Python 3.4.0rc1.
About the patches:
* The patches below 100 are significantly changed, because like for
Python 2.x, a good number of improvements have been made in the
upstream Python for cross-compilation. Therefore, almost all of
these patches have been modified.
* All the patches above 100 are simply updated for Python 3.4.0, with
a small refactoring for the handling of test modules.
The details of the python3.mk changes are:
* --without-ensurepip to tell Python to not use PIP at build time.
* Many environment variables are no longer passed, they were specific
to our cross-compilation patches
* The fixup of the LIBDIR in the Python Makefile is no longer needed
since Python has switched to _sysconfigdata.py for distutils
configuration instead of parsing the Makefile.
* A new post patch hooks touches the two files generated by pgen to
make sure they are newer than the pgen sources, which ensures pgen
is not built/executed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some parts of python3.mk were hardcoding the 3.3 version as the major
version, which does not work for Python 3.4 and other future
versions. Instead, use the existing PYTHON3_VERSION_MAJOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host python always had --disable-unicodedata, regardless of the
corresponding configuration option BR2_PACKAGE_PYTHON_UNICODEDATA.
Since the host python is used to byte-compile python modules, this meant
that such modules could not contain unicode strings. For example, following
statement in a python module:
print u"\N{SOLIDUS}"
would cause the byte-compilation to fail with message:
SyntaxError: ("(unicode error) \\N escapes not supported (can't load
unicodedata module)",
Instead, conditionally disable unicodedata based on
BR2_PACKAGE_PYTHON_UNICODEDATA, also for the host python.
This fixes bug #6542 (https://bugs.busybox.net/show_bug.cgi?id=6542)
Reported-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target python3 depends on host-python3, but most of the scripts
call "python", so we need to ensure that $(HOST_DIR)/usr/bin/python
exists. This patch achieves this by creating a python -> python3
symbolic link in $(HOST_DIR), just like we are already doing for the
target Python 3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 97c687000 (pkg-autotools.mk: default host AUTORECONF{,_OPT} to the
target values) we automatically enable autoreconf for host builds if it
is enabled for the target, so these can go.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the python2 patches were left behind when doing the python3
package. This was because the python build system can now autodetect
what packages can be built in the system.
However, some of these patches are actually useful to reduce drastically
the size of the interpreter.
This patch ports the relevant patches to the python3 package, and adds a
new patch to remove the idle3 IDE as well from the interpreter.
Fixes#5696
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Python3 changes the pyc lookup strategy, ignoring the
__pycache__ directory if the .py file is missing. Change
install location to enable use of .pyc without their parent .py
See http://www.python.org/dev/peps/pep-3147
[Peter: add patch header]
Signed-off-by: Daniel Nelson <daniel@sigpwr.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
(untested)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes#5690
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes#5702
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
