Commit Graph

501 Commits

Author SHA1 Message Date
Waldemar Brodkorb
19d5953bf1 sh4: fix toolchain creation
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.

So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.

Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.

Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 (ARM and SH4 uClibc toolchain builds)
2015-05-03 16:30:36 +02:00
Jérôme Pouiller
d59749363f qmx6_defconfig: update
- Update kernel
- Add u-boot configuration
- 6q_bootscript.txt is no more needed by new version of u-boot

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
[build test only]

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-05-01 22:57:19 +02:00
Jérôme Pouiller
6e4515cc53 freescale_imx6*_defconfig: bump kernel to 3.10.17_1.0.1_ga
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-05-01 22:57:19 +02:00
Jérôme Pouiller
b91a603e7b nitrogen6x_defconfig: bump kernel to 3.10.17_1.0.1_ga
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-05-01 22:57:19 +02:00
Frank Hunleth
a066ff0d73 raspberrypi: bump raspberrypi_dt_defconfig kernel
This brings the raspberrypi_dt_defconfig up to the same kernel used by
the raspberrypi2_defconfig. Also changed the git URL to use HTTP for
consistency.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-05-01 10:23:12 +02:00
Frank Hunleth
2d5326d9a1 raspberrypi2: switch Linux kernel to rpi-3.18.y
This changes the kernel used on the Raspberry Pi 2 from the 3.19 branch
back to the 3.18 branch. This provides a couple of advantages:

  1. mmc0 works again. Floris Bos found out that this was due to using
     the precompiled DTB files from rpi-firmware. These DTBs were built
     using 3.18.
  2. The rpi-3.18.y branch is not regularly rebased like rpi-3.19.y
     according to popcornmix. See
     https://github.com/raspberrypi/linux/issues/915.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-05-01 10:23:00 +02:00
Gustavo Zacarias
29ad347190 configs: drop redundant IPv6 option
Drop the buildroot toolchain IPv6 option from the only config that's got
it since it's now a non-option.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-22 22:59:54 +02:00
Frank Hunleth
7e66b9905d altera: update use of BR2_TARGET_UBOOT_PATCH_DIR
Use BR2_TARGET_UBOOT_PATCH now that BR2_TARGET_UBOOT_PATCH_DIR is
deprecated.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-19 11:07:12 +02:00
Nikolay Dimitrov
8866bdb1fc configs/riotboard: bump kernel to version 3.19.3
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-18 19:08:09 +02:00
Gustavo Zacarias
46cc0904bb configs/qemu: update ppc mpc8544ds
Switch to kernel 4.0.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
e07008b1a1 configs/qemu: update ppc g3beige
Switch to kernel 4.0.
Simplify kernel config to reduce bloat.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
7417c4e6f7 configs/qemu: update nuri to latest 3.10.x kernel
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
f68b7585bc configs/qemu: update x86_64
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
055cfbf8a2 configs/qemu: update x86
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
fcb646178f configs/qemu: update ppc virtex ml507
Switch to kernel 4.0.
Use a custom kernel config to avoid the caveat of a huge debug-enabled
one.
And also reduce defconfig options to avoid bloat.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
591e66c253 configs/qemu: update xtensa lx60
Switch to kernel 4.0.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
6d1e5ea63a configs/qemu: update sh4 r2d
Switch to kernel 4.0.
Simplify kernel config to reduce bloat.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
28ec083f82 configs/qemu: update mips malta configurations
Switch to kernel 4.0.
Simplify kernel config to reduce bloat.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
d810fabb73 configs/qemu: update sparc ss10
Switch to kernel 4.0.
Switch kernel config to ext4, simplify to reduce bloat.
Adjust invocation to keep the framebuffer window for graphics testing.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
10e8029344 configs/qemu: update ppc64 pseries
Switch to kernel 4.0.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
f4e8c18897 configs/qemu: update microblazebe/el
Switch to kernel 4.0.
Remove redundant/pointless kernel options to reduce bloat.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
36588d6388 configs/qemu: update arm vexpress
Switch to kernel 4.0.
Switch to DTB (mandatory).
And adjust invocation to use dtb and add a little more RAM for testing.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
1631cfd856 configs/qemu: update arm versatile
Switch to kernel 4.0.
Remove redudant/pointless kernel options to reduce bloat.
Switch from smc9111 to rtl8139 for networking because of issues.
Enable evdev support for better x11 testing.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Gustavo Zacarias
793d08d610 configs/qemu: update aarch64 virt
Switch to kernel 4.0.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-16 08:02:45 +02:00
Jérôme Pouiller
01e43af20b configs/raspberrypi2: kernel version does not exist anymore
It looks like version 23c76b7 of Raspberry kernel does not exist
anymore:

$ git clone https://github.com/raspberrypi/linux.git
[...]
$ cd linux
$ git co 23c76b7f608e51258c6fca02aebeb5d588583149
fatal: reference is not a tree: 23c76b7f608e51258c6fca02aebeb5d588583149

Replace it by latest version of 3.19 branch.

[Thomas: tweak commit log.]

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-08 21:28:08 +02:00
Baruch Siach
c9674d2f4f configs/raspberrypi: remove BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS became ineffective in commit a5ce7590c4
(package/rpi-firmware: bump version), and was removed in commit 4e92ffdc47
(rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS).
Remove it from the Pi configs.

Also, remove the now obsolete comment in these config files.

Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-07 21:30:05 +02:00
Vincent Stehlé
4384ec9c5d confifs/freescale_imx28evk_defconfig: select headers 3.19
We use a manually specified custom version 3.19.2 of the linux kernel
for i.MX28, but linux-headers defaults to a 2.6.x family.

Select custom headers family 3.19.x explicitely, to repair
linux-headers "build".

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-04 21:17:02 +02:00
Vincent Stehlé
0eb659d04e config: Add defconfig for Freescale i.MX28 EVK
The i.MX28 Evaluation Kit (or EVK) is Freescale's evaluation board based on the
i.MX287 Applications Processor.

This defconfig is based on mainline u-boot and Linux kernel.

Also, we add an SD card creation script and documentation, shamelessly based on
the ones for i.MX5/6 by Luca Ceresoli.

[Arnout: fixate U-Boot and kernel (headers) versions]

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-03 17:26:00 +02:00
Vincent Stehlé
aacbdd131b configs: add Freescale SABRE Auto board support
SABRE Board for Automotive Infotainment (SABRE Auto, a.k.a. SABRE-AI) is
Freescale's evaluation board based on the i.MX 6 ARM Cortex-A9 applications
processor.

Those defconfigs are an adaptation of freescale_imx6{q,dl}sabresd_defconfig for
SABRE Auto, and are thus based on Freescale "official" git repo on
git.freescale.com and SW release 3.10.17_1.0.0_ga.

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-01 23:34:17 +02:00
Vincent Stehlé
3029f6ef14 imx6sabresd: rename to imx6sabre
Rename imx6sabresd board folder to imx6sabre, to prepare for Sabre Auto
addition. Update doc, link and defconfigs accordingly.

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Eric Bénard <eric@eukrea.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-01 23:34:10 +02:00
Gustavo Zacarias
d792750935 configs: drop largefile option
Drop the buildroot toolchain non-largefile support option since it's
being removed.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-04-01 22:43:18 +02:00
Nikolay Dimitrov
d13aa2f9e0 configs/riotboard: bump kernel to version 3.19
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-27 17:49:59 +01:00
Vincent Stehlé
c7ee1bb4d4 configs: add defconfig for Freescale i.MX31 PDK
The i.MX31 Product Development Kit (or PDK) is Freescale development board
based on the i.MX31 application processor.

This defconfig is based on mainline kernel v3.15.10, and is aimed at a PDK in
"3 stack" configuration, with CPU engine board, personality board and debug
board.

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-25 01:01:20 +01:00
Peter Korsgaard
e30fdfa9e1 minnowboard_max_defconfig: bump kernel to 3.19.1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-03-09 22:51:31 +01:00
Nikolay Dimitrov
3c9aa32183 board: add support for RIoTboard
This is a small development board, based on Freescale IMX6 Solo SoC
(single core ARM Cortex-A9). The board has excellent support in mainline
U-Boot and Linux.

Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-06 23:52:01 +01:00
Ryan Barnett
6884e5b912 configs: update config for Atmel SAMA5D3 Xplained board
Update configuration to use the 3.18.8 kernel and update U-Boot to
2015.01. With the switch to 2015.01. use the U-Boot SPL image for the
first stage bootloader instead of the at91bootstrap. The U-Boot SPL
requires that the U-Boot image format be u-boot.img in order to load
from the SD card.

Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-05 12:12:11 +01:00
Gustavo Zacarias
001846efe6 ts5x00_defconfig: switch to BR2_KERNEL_HEADERS_VERSION
In preparation for BR2_KERNEL_HEADERS_3_17 deprecation.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-04 22:12:45 +01:00
Gustavo Zacarias
642348c8c8 configs/qemu_mips64el_malta_defconfig: don't force eglibc
It's not required, the toolchain options should handle that.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-03-04 19:42:56 +01:00
Gustavo Zacarias
059a013ed8 configs/qemu: update to the latest kernel/headers versions
qemu_arm_vexpress_defconfig is broken for 3.19 so keep it with 3.18.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-03-03 07:59:59 +01:00
Peter Korsgaard
7403ea730d Merge branch 'next'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-03-02 23:26:20 +01:00
Yann E. MORIN
7cbfc35ed3 configs/raspberrypi_dt: update and fix our defconfig
Lock to 3.18 headers; add comment about installing DTBs;
bump kernel sha1.

Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-02-28 08:10:48 +01:00
Yann E. MORIN
79e8d730ad configs/raspberrypi2: update and fix our defconfig
Lock to 3.19 kernel headers; and comment about installing DTBs; bump
kernel sha1.

Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-02-26 22:46:26 +01:00
James Hebden
7f6a9f6e89 configs: add Raspberry Pi 2 defconfig
Signed-off-by: James Hebden <james@hebden.net.au>
[yann.morin.1998@free.fr: fix commit log; further bump]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Guillermo A. Amaral" <g@maral.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-02-22 22:25:12 +01:00
Yann E. MORIN
188c0a3168 configs: get rid of avr32 defconfigs
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-02-14 17:40:04 +01:00
Frank Hunleth
c485d8a3d1 boards/raspberrypi: update dt kernel sha1
The sha1 used for the DT enabled kernel is no longer available
(presumably, the rpi-3.18.y branch was rebased recently.) This updates
it to the lastest sha1 in the rpi-3.18.y branch.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-02-14 10:11:33 +01:00
Philippe Reynes
f991684cf7 armadeus apf27: update kernel to 3.18.6
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-02-10 00:13:11 +01:00
Ivo Slanina
61d9bf5ae7 configs/udoo_quad_defconfig: new defconfig
Added defconfig for UDOO Quad board. Used official (manufacturer) kernel 3.0.35.
Kernel is patched in order to use gcc version 4.8 and above, according to
mailing list at
https://lists.yoctoproject.org/pipermail/meta-freescale/2013-July/003531.html

Bootloader is also downloaded from official (manufacturer) repository.

Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
[ThomasDS: use explicit commits instead of 'master'; clarify source for
kernel and u-boot as 'manufacturer']
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(compile-tested only)
[Thomas P: remove glibc, C++ and mdev selection, added some comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-02-02 21:25:30 +01:00
gilles.talis@gmail.com
fd02d3857d imx6slevk: fix uImage load address
i.MX6 SoloLite SoC has a different external memory base address
than the other i.MX6 family SoCs:
- 0x80000000 for i.MX6 SoloLite (see i.MX6 SoloLite Reference Manual [1])
- 0x10000000 for the others (see i.MX6Quad/Dual Reference Manual [2])

[1] http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6SLRM.pdf?fasp=1
    Table 2-1 System Memory Map, MMDC - DDR Controller
[2] http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6DQRM.pdf?fasp=1
    Table 2-1 System Memory Map, MMDC - DDR Controller

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-02-01 22:01:38 +01:00
Gustavo Zacarias
996784cb0f configs/qemu: update to the latest kernel/headers versions
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2015-01-28 21:45:52 +01:00
Yann E. MORIN
23da43ae12 configs: add a DT-enabled Raspberry Pi defconfig
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.

We have to use a 3.18-based kernel for that, but there are a few
limitations:

  - we can not use the minimalist RPi defconfig bundled with the kernel,
    namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
    sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
    CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;

  - most importantly, the rpi-3.18.y branch is constantly rebased, so
    there is no guarantee that the sha1 I use today will still be usable
    in the long term. Using the name of hte branch is not better either.

So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2015-01-10 15:46:42 +01:00