Added hashes for tarball and license file.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rebased patch due to upstream commit
36037bdaf0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release includes:
- enable VERITY by default on Android
- introduce some preen mode in fsck.f2fs
- add f2fs_io tool
- add casefolding support
And, there are lots of bug fixes.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Only rs9113_wlan_qspi.rps firmware was present on generated image.
Signed-off-by: Adrien Ricciardi <adrien.ricciardi@hotmail.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
tbl2hex is a host command line that is built with:
$(CC_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ $(TBL2HEX_OBJECTS) $(EXPAT_LIBS_FOR_BUILD) $(LDLIBS_FOR_BUILD)
It needs cldr.o which can depends on expat and is built through:
%.$B: $(SRC_DIR)/%.c
$(CC_FOR_BUILD) -DFOR_BUILD $(CFLAGS_FOR_BUILD) -o $@ -c $<
When cross-compiling, build fails because expat is not found on host:
gcc -DFOR_BUILD -I. -I. -I./../Programs -I../Programs -I../Headers -I./.. -I.. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_DEFAULT_SOURCE -D_POSIX_C_SOURCE=2 -D_BSD_SOURCE -D_XOPEN_SOURCE=500 -D_XOPEN_SOURCE_EXTENDED -D_GNU_SOURCE -D_DEFAULT_SOURCE -D_POSIX_C_SOURCE=2 -D_BSD_SOURCE -D_XOPEN_SOURCE=500 -D_XOPEN_SOURCE_EXTENDED -D_GNU_SOURCE -DHAVE_CONFIG_H -g -O2 -std=gnu99 -Wall -Werror=format-security -o cldr.build.o -c cldr.c
cldr.c:31:10: fatal error: expat.h: No such file or directory
#include <expat.h>
^~~~~~~~~
To fix this issue, add host-expat dependency as well as patch so that
the *_FOR_BUILD variables are properly passed to the sub-configure
script that brltty runs to build the host utilities.
Fixes:
- http://autobuild.buildroot.org/results/362cfb57e4a91a066493269d8078d931529ddf69
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: use a different, simpler solution.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following the switch to Python 3.8, the libselinux Python extension
started to fail building. This is fixed by upstream commit
2efa06857575e4118e91ca250b6b92da68b130d5, which we backport as
0003-libselinux-Use-Python-distutils-to-install-SELinux-p.patch.
This patch has the nice merit of switching to using distutils to build
the Python extension of libselinux, instead of some custom logic. This
allows to significantly simplify our libselinux.mk: we can rely on
PKG_PYTHON_DISTUTILS_ENV and HOST_PKG_PYTHON_DISTUTILS_ENV instead of
lots of custom variables.
However, upstream commit 2efa06857575e4118e91ca250b6b92da68b130d5 had
its own issues:
* Hardcode of -I $(DESTDIR)/$(INCLUDEDIR) -L $(DESTDIR)/$(LIBDIR) at
build time, while DESTDIR is normally empty at build time, causing
bogus -I /usr/include -L /usr/lib to be used
This is fixed in
0004-src-Makefile-don-t-pass-bogus-I-and-L-to-python-setu.patch
* New usage of ln --relative, which is not supported in older
distributions.
This is fixed in
0005-Remove-ln-relative-usage-in-install-pywrap.patch
* Usage of the host Python "imp" module to query the extension used
for native Python module, but that returns an incorrect result when
cross-compiling. We chose to simplify the code to not have to query
for this information.
This is fixed in
0006-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch
With this patch, the libselinux Python module was built-tested with
Python 2 and Python 3, and run-time tested as well in both
configurations, for both the target and host variants of libselinux.
Fixes:
http://autobuild.buildroot.net/results/aeb58de7ad674b980258e6ed30c7da3949a04452/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove 0004-meson-Link-xvmc-with-libxv.patch witch was backported to mesa3d
19.2. This patch was added to Buildroot at the time when mesa3d version 19.1
was used.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are some scripts used when building micropython that require
python3 on the build host. Use BR2_PYTHON3_HOST_DEPENDENCY so this can
be either be satisfied by installing it on the build host or by building
the host-python3 package.
Fixes:
- http://autobuild.buildroot.net/results/b85b2214576030026a8e04d142a77a2648379417/
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set WANT_SWIG={ON,OFF} to {en,dis}able swig and avoid a random build
failures probably due to parallel build issue when extracting
pre-generated tarball:
CMake Error: Problem with archive_write_header(): Can't unlink already-existing object
CMake Error: Current file: swigpyrun.h
CMake Error: Problem extracting tar: /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output/build/znc-1.7.5/modules/modpython/generated.tar.gz
This tarball contains pre-generated files, and is not used when
host-swig is available.
Fixes:
- http://autobuild.buildroot.org/results/f3394de616cea4f474b6d5887aa0d5f5dff05281
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
icu is required to build Q5tWebkit.
When UChar is defined as char16_t in ICU, then qtbase fails to detect ICU.
The issue is described https://bugreports.qt.io/browse/QTBUG-49586
Build fails with following error messages:
...
ustring.h:473:20: error: ‘UChar’ does not name a type
u_strCompare(const UChar *s1, int32_t length1,
^
^
make[2]: *** [Makefile:195: icu.o] Error 1
ICU disabled.
The ICU library support cannot be enabled.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added dependencies to lz4 and utf8proc.
Replaced the 0002-disable-macos-specific-features.patch by a simpler
patch/workaround that still works after the version bump.
Updated license hash after various upstream commits:
https://github.com/apache/subversion/commits/trunk/LICENSE
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On x86_64, we use the host compiler instead of the target compiler to
build kvm-unit-tests, because it is built with -m32 and our target
compiler doesn't support that.
However, the compiler on Arch Linux is broken: it *always* builds with
-fstack-protector, even when -ffreestanding is passed. However, when
-fnostdlib is passed at link time (which is normally the case when
building with -ffreestanding), it is not linked with the stack-protector
library. This leads to a link time error:
/usr/bin/ld: x86/realmode.o: in function `print_serial_u32':
.../x86/realmode.c:104: undefined reference to `__stack_chk_fail'
Since the entire package is built with -ffreestanding, it doesn't
support stack-protector at all. Therefore, simply pass
-fno-stack-protector explicitly on x86_64 to work around the bug in Arch
Linux.
Bug reported upstream: https://bugs.archlinux.org/task/64270
Fixes:
- http://autobuild.buildroot.org/results/e6f767755ffdb5ecc014eb5ad7519814f075a60e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Upstream switched to cmake, removed patches for the old buildsystem
and added new patch to install libmemenv.a and memenv.h.
Added license hash.
Package requires gcc >= 4.8:
https://github.com/google/leveldb/blob/master/CMakeLists.txt#L14
Removed "v" from LEVELDB_SITE to reflect current naming scheme.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adapt the format to the current template, used in other init scripts.
Move the one socond delay in restart to stop, giving acpid time to send
dying gasp to syslog.
Users willing to add start arguments can set the ACPID_ARGS variable in
/etc/default/acpid instead of rewriting the init script.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This used to cause a build failure with gettext-tiny, but this is now
fixed by the version bump in 160f0a033b
("package/gettext-tiny: bump version"). Nevertheless, it makes sense
to not install the i18n files when they are not needed, i.e when
BR2_SYSTEM_ENABLE_NLS is disabled.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The first line of JITTERENTROPY_LIBRARY_BUILD_CMDS must end with "\" to
concatenate the two lines.
Fixes: build error
[...]
/usr/bin/make -j33 -C
/local/users/mmayer/buildroot/output/arm64/build/jitterentropy-library-2.2.0
/local/users/mmayer/buildroot/output/arm64/host/bin/aarch64-linux-gcc
-shared -Wl,-soname,libjitterentropy.so.2 -o libjitterentropy.so.2.2.0
jitterentropy-base.o -Wl,-z,relro,-z,now -lrt
/local/users/mmayer/buildroot/output/arm64/host/bin/aarch64-linux-ar
rcs libjitterentropy.a jitterentropy-base.o
jitterentropy
/bin/bash: jitterentropy: command not found
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On current version msgmerge doesn't work properly, it exits with:
fopen: No such file or directory
The problem has been reported at
https://github.com/sabotage-linux/gettext-tiny/issues/42 and fixed
with commit
a597aaebd1
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From [1]
"Prior to xvmc 1.0.12 libxvmc incorrectly required libxv, but that
was fixed. This results in compilation failures for the gallium
xvmc tracker and tools. This patch fixes that by explicitly linking
to libxv."
Add xlib_libXv dependency to mesa3d when BR2_PACKAGE_MESA3D_XVMC is set.
[1] https://cgit.freedesktop.org/mesa/mesa/commit/?id=e456a053c3d6ec4f3d4581edcad05c72dfdaa407
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LLVM must be built with rtti (runtime type information) support
to build the Gallium Nouveau driver or the Clover OpenCL state
tracker when llvm support is enabled in mesa3d.
Fixes the build when BR2_PACKAGE_MESA3D_OPENCL is set:
"The Clover OpenCL state tracker requires rtti, you need to turn off clover or use an LLVM built with LLVM_ENABLE_RTTI."
This check was added by mesa3d 19.1:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=29912f2ea486fb8ffbc98db347679cf542422efe
Fixes the build when BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU and BR2_PACKAGE_MESA3D_LLVM are set
"The Nouveau driver requires rtti. You either need to turn off nouveau or use an LLVM built with LLVM_ENABLE_RTTI."
This check was added by mesa3d 19.0:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=a2596450ac7330c8965c819491038fb1ad454333
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow to build LLVM with run-time type information as this feature is
needed (for example) by mesa3d's Gallium Nouveau driver or the Clover
OpenCL state tracker when llvm support is enabled in mesa3d.
While we only care about RTTI support in the target, we also need to
enable it in the host LLVM, so that llvm-config gives the proper
result.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows sharing a host USB port with the guest, which is helpful for
the upcoming libvirt package.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adapt the format to the current template, used in other init scripts,
but do not use start/stop functions due to peculiarities.
Treat RNG initialization and random seed backup as separate operations.
Read /proc/sys/kernel/random/poolsize to calculate the pool size, as
suggestred by the urandom manual page.
Ensure that the random seed file has the correct size to prevent dumping
an empty file to /dev/urandom on the first boot.
Save the seed at /var/lib/random-seed as other non-systemd distributions
do (e.g. RHEL6), since /etc can be in a red-only rootfs. The Filesystem
Hierarchy Standard defines that /var/lib holds persistent data modified
by programs as they run.
Users willing to use a different path just need to redefine URANDOM_SEED
in /etc/default/urandom instead of rewriting the init script.
[Peter: save/restore umask]
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is helpful for the upcoming libvirt package.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
package/gcc/Config.in.host:84: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For building libyang a toolchain with thread support is needed. Add the dependancy
to BR2_TOOLCHAIN_HAS_THREADS.
Fixes:
- http://autobuild.buildroot.net/results/1d84ff4aab67a98113d967b65467109e80bb5917
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows to use xserver_xorg-server without mesa3d.
Build-tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These patches are already in qemu upstream under:
- 184943d827ce09375284e6fbb9fd5eeb9e369529
- 71ba74f67eaca21b0cc9d96f534ad3b9a7161400
They rename gettid() to sys_gettid() to avoid clash with glibc
Signed-off-by: Paulo Matos <pmatos@igalia.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 9.1, GCC provides support for the D programming language [1].
So add a Kconfig entry to enable support for it.
[1] https://dlang.org/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 9.1, GCC provides support for the D programming language [1].
So add an option to indicate the selected toolchain supports this
language.
[1] https://dlang.org/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Package has been relicensed under the MIT license, and LICENSE.md has been
removed. The git repo has a LICENSE file, but it isn't available in the
tarball, so use the readme file instead.
611b74341f
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump of python3 to 3.8, the kmod Python extensions fail to
build. There was a change in Python 3.8: they no longer want Python
extensions to be linked with libpython.
However, kmod Python extensions are built with -Wl,--no-undefined,
which checks that there isn't any unresolved symbol in the .so files
being built. This is not compatible with the new Python policy, so we
add a patch (submitted upstream) that passes -Wl,-z,undefs when
building the kmod Python extensions, to override the effect of
-Wl,--no-undefined.
Fixes:
http://autobuild.buildroot.net/results/84455dbc892865b9748bedeecb1d3b0bdc15704d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a more standard $(INSTALL) -D solution instead of -D -t, as it
causes some failures in the autobuilders.
Fixes:
http://autobuild.buildroot.net/results/b473c44ae953dec3e4f88c4e363fb1a84b5e0dc8/
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>