Now based on 4.19.126 (from 4.19.113).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel to version 5.7.1 and U-Boot to 2020.04
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.7.1 and U-Boot to 2020.04
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.6 and uboot to version 2020.04 for
orangepi-zero configuration
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the i.MX8M Nano EVK Board [1].
The final boot image is created from uboot and firmware binaries in post
image script board/freescale/common/imx/imx8-bootloader-prepare.sh
Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel
configuration needs host-openssl to build.
[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to 2020.04 and kernel to 5.4.42 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit:
- bump Linux & U-Boot to linux4sam-2020.04
- bump at91bootstrap to v3.9.2
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.04 and kernel to version 5.6.3
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is now forcefully selected by
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS when the kernel is in
charge of building DTBs (BR2_LINUX_KERNEL_DTS_SUPPORT=y). So enabling
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is no longer needed in the 64-bit
defconfigs for Raspberry Pi 3 and 4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, nanopi_neo4 does not need pylibfdt or pyelftools, but only a
host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, roc_pc_rk3399 does not need pylibfdt or pyelftools, but only
a host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the bump to U-Boot 2020.01 in commit
e210080d2a, it needs Python 3.x on the
host.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/535054357
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Clément Péron <peron.clem@gmail.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Contrary to riscv32, the qemu_riscv64_virt defconfig doesn't needs
any specific change. It could have been updated to Linux 5.4.35 in
the commit 80a044703a.
So, update the kernel version to 5.4.35.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit f7a887c368 and
23aee3eac4 since the kernel patch
is not needed as soon as qemu >= 3.1.0 is used with a kernel >=
4.11-rc1.
The qemu emulation of sh-sci driver was fixed by adding basic
timeout handling for 9600 bps [1].
[1] https://git.qemu.org/?p=qemu.git;a=commit;h=71bb4ce1b5592cdc03abc48cdf4ecb15b2db81a0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux version are changed to the new LTS kernel 5.4.35 for all qemu
defconfigs, except for riscv and csky. Thoses defconfigs are left
unchanged because they require either a custom Linux repository
or a specific kernel header version causing some difficulties when
upgrading to 5.4.35.
Update the nios2-10m50 linux.fragment to update the .dtb build directory
due to a change in kernel 4.20 [1]:
nios2: build .dtb files in dts directory
Align nios2 with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.
This transition could break some scripts if they expect dtb files in
the old location.
For x86 and x86_64 kernel, add the CONFIG_PCI symbol due a change in kernel
5.0 [2]. The option was previously enabled by default (default y).
PCI: consolidate PCI config entry in drivers/pci
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Update the kernel of ppc-mac99 defconfig added in Buildroot 2019.08.
This version bump was tested on gitlab [4] using the newly introduced
boot-qemu-image.py script [5].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=118864869805123bf82d666062542440a0fda5dd
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eb01d42a77785ff96b6e66a2a2e7027fc6d78e4a
[3] a8fac3fcfc
[4] https://gitlab.com/kubu93/buildroot/pipelines/139819874
[5] 0c79350638
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Convert the patch for microblaze kernel added for kernel 3.14 by
Waldemar to git format.
Note: the Waldemar Sob line is missing in the original patch:
fa27985483
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Latest bump introduced a regression for Nitrogen8MM, now fixed.
Changelog:
- Fix Nitrogen8MM SPL regression
- Add multi-rank lpddr4 training support
- Improve fastboot support
- Add Android AVB / BCB support
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/517918160
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Giving an explicit getty port is not really needed, as we already
spawn a getty on the "console" device, which will match the serial
port passed as console= argument on the kernel command line.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This option never existed in opensbi package.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_SOFT_FLOAT option is lost while loading the defconfig with:
make qemu_ppc_virtex_ml507_defconfig
On powerpc, BR2_POWERPC_SOFT_FLOAT must be used to enable soft
floating point support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 2e71b396a1, this defconfig needs
a glibc toolchain to select sunxi-mali-mainline package.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_GLMARK2 is lost while loading the defconfig with:
make engicam_imx6qdl_icore_qt5_defconfig
In order to select gmark2 package, BR2_PACKAGE_GLMARK2_FLAVOR_ANY option
must be set.
Based on the defconfig without X11 and wayland package, the only missing
option to select BR2_PACKAGE_GLMARK2_FLAVOR_ANY is BR2_PACKAGE_HAS_UDEV.
The only possible option is to enable one of the udev provider
(eudev or systemd). Select eudev package for /dev management.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This option has been removed since 6836f2a70a.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig use a custom defconfig file located
in board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig.
BR2_TARGET_UBOOT_BOARD_DEFCONFIG is used to provide the name
of a in-tree defconfig. Since a custom defconfig is used,
this option is lost while loading the defconfig with:
make nanopi_r1_defconfig
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig loses mesa3d-demo and glmark2 package since commit
5cb821d563 that introduced an
explicit option to enable GLX support.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ext4 option is BR2_TARGET_ROOTFS_EXT2_4 not
BR2_TARGET_ROOTFS_EXT_4.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
board/amarula/a64-relic/readme.txt makes use the host fastboot utility
to flash the board. However, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT
(which is enabled in the defconfig) has a dependency on
BR2_PACKAGE_HOST_ANDROID_TOOLS, which is not enabled in the
defconfig. Due to this, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y is
lost when loading the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: change to add BR2_PACKAGE_HOST_ANDROID_TOOLS=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add support for the low cost QMTECH XC7Z010 starter kit
board [1].
[1] http://www.chinaqmtech.com/xilinx_zynq_soc
Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the nanopi_neo4 was added in
d1cd9cdf26, but then removed in
8af7b11bd8 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.
Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.
Compared to the previous defconfig, the following changes were done:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP i.MX8MNano based SBC with 1GB of LPDDR4 and 16GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-nano/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix serial# variable creation for i.MX8MQ/MM/MN
- improve display selection
- fix fastboot support for boards with 1GB of RAM only
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix PMIC issue for i.MX8MMini
- add support for MCP25xxFD SPI to CAN chip
- fix external module build issue for GCC >= 9
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig supports the OLPC XO-1 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.04 and kernel to version 5.6.3
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2020.04 and kernel to 5.6.3.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.6.3, U-Boot to 2020.01. New kernel and modules based
on arm64 defconfig do not fit into default size filesystem anymore.
So increase filesystem size to 120M.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_TARGET_ROOTFS_EXT2_LABEL now defaults to "rootfs", so repeating
that in those defconfigs is no longer necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit allow to use the post-image script previously added
for each qemu board.
Add "$(BR2_DEFCONFIG)" as post-image script argument to retried
the qemu command line.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bumping to kernel 5.5 add many new features compare to
the actual 5.3 used on Beelink GS1.
Which are crypto, USB3, GPU, IR, S/PDIF and RTC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-boot patch has been upstreamed.
Bump U-boot version and drop the patch.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
