The python support only works with python2, so drop it.
Notice that there is a PR adding python3 support, but it is not yet merged:
https://github.com/owfs/owfs/pull/32
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
And adjust the comments to clarify that the toolchain dependencies are from
python3.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The configure script needs a bit of help to detect the python version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python 2.7 is EOL since April 2020, so drop support for the target package.
https://www.python.org/dev/peps/pep-0373/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python2 for the target is about to get removed, so drop the tests using it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The package was updated to support python3 in commit 4a8bedc51d
(python-pyzmq: enable PyZMQ for Python 3), but the comment dependency was
missed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Convert BR2_TOOLCHAIN_EXTERNAL_PATH to an absolute path when used.
Otherwise the symbolic links to the external toolchain binaries are
not installed in host/bin when BR2_TOOLCHAIN_EXTERNAL_PATH is relative.
This happens because TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
changes directory into host/bin to create the symbolic links.
From there the tools are no longer found via the relative path and
a single symbolic link host/bin/$(prefix)-* is created instead.
Although relative paths sounds like something less than ideal to put in
a Buildroot configuration, it's actually rather typical to put the
buildroot sources as a submodule (or subdirectory) of custom sources
(either in a BR2_EXTERNAL or not), in which case the relative path is
well-defined.
Signed-off-by: Juergen Stuber <juergen@jstuber.net>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Buildroot uses variable LINUX_ARCH_PATH to refer to the arch-specific
directory in the Linux tree, which may not necessarily be arch/$(KERNEL_ARCH).
Buildroot already accounts for the case of KERNEL_ARCH=i386 and
KERNEL_ARCH=x86_64, but does not for KERNEL_ARCH=sparc64, in which case the
correct directory is arch/sparc.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The variable 'KERNEL_ARCH' is actually a normalized version of
'ARCH'/'BR2_ARCH'. For example, 'arcle' and 'arceb' both become 'arc', just
as all powerpc variants become 'powerpc'.
It is presumably called 'KERNEL_ARCH' because the Linux kernel is typically
the first place where support for a new architecture is added, and thus is
the entity that defines the normalized name.
However, the term 'KERNEL_ARCH' can also be interpreted as 'the architecture
used by the kernel', which need not be exactly the same as 'the normalized
name for a certain arch'. In particular, for cases where a 64-bit
architecture is running a 64-bit kernel but 32-bit userspace. Examples
include:
* aarch64 architecture, with aarch64 kernel and 32-bit (ARM) userspace
* x86_64 architecture, with x86_64 kernel and 32-bit (i386) userspace
In such cases, the 'architecture used by the kernel' needs to refer to the
64-bit name (aarch64, x86_64), whereas all userspace applications need to
refer the, potentially normalized, 32-bit name.
This means that there need to be two different variables:
KERNEL_ARCH: the architecture used by the kernel
NORMALIZED_ARCH: the normalized name for the current userspace architecture
At this moment, both will actually have the same content. But a subsequent
patch will add basic support for situations described above, in which
KERNEL_ARCH may become overwritten to the 64-bit architecture, while
NORMALIZED_ARCH needs to remain the same (32-bit) case.
This commit replaces use of KERNEL_ARCH where actually the userspace arch is
needed. Places that use KERNEL_ARCH in combination with building of kernel
modules are not touched.
There may be cases where a package builds both a kernel module as userspace,
in which case it may need to know about both KERNEL_ARCH and
NORMALIZED_ARCH, for the case where they differ. But this is to be fixed on
a per-need basis.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Arnout: Also rename BR2_KERNEL_ARCH to BR2_NORMALIZED_ARCH]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Similar to other arch-specific strings, the 'KERNEL_ARCH' variable can be
determined from Config.in.<arch> files.
Besides aligning with similar strings, this also means simplification: the
big 'sed' covers several architectures not even supported by Buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ace needs C++11 since its addition in commit
3621918d1b to avoid the following build
failure:
In file included from /home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/chrono:35:0,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/Time_Value.h:23,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/OS_NS_unistd.h:25,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/ACE.inl:2,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/ACE.h:886,
from /home/peko/autobuild/instance-1/output-1/build/ace-7.0.1/ace/ACE.cpp:1:
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support is currently experimental, and must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
#error This file requires compiler and library support for the \
^
Fixes:
- http://autobuild.buildroot.org/results/13376405e313da112f546076a10859e60631d5d5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b429dce6f8 forgot to add wchar
dependency resulting in the following build failure of postgresql:
configure: error: C compiler "/home/buildroot/autobuild/instance-2/output-1/host/bin/arm-linux-gcc" does not support C99
Fixes:
- http://autobuild.buildroot.org/results/e4b59fecd2a5bcda8103ddf4eae3dbd78fe3b896
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python support in avahi needs pygobjet to do anything:
Building avahi-python: no (You need python, pygobject and python-dbus!)
So add optional support for it. Python-gobject is only available for
python3, so change the python logic to use python 3.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not used by the configure script and refer to PYTHON_TARGET_BINARY
which was dropped back in 2010 by commit e3418f69cf (python: convert to
autotargets, bump to 2.7.1, many improvements), so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gnuradio only works with python3 since commit 786c783f37
(package/python-numpy: bump to version 1.18.2), so the python2/3 logic for
_PYVER can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
support/testing/tests/package/test_lua_cffi.py:14:1: W391 blank line at end of file
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As pointed out by Jan Lübbe, D-Bus support is optional:
> You can build without D-Bus (./configure --disable-service).
So drop it from the required dependencies and add a RAUC_DBUS sub option
like it is done for network/json.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 13114d0f93 forgot to add spaces
before and after '=' and added a spurious space in Config.in
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
