Now that we can get the whole dependency tree from make, use it to
speed up things considerably.
So far, we had three functions to get the dependencies information:
get_depends(), get_rdepends(), and, somehow unrelated, get_version().
Because of the way %-show-{,r}depends works, getting the dependency tree
was expensive, the three functions all took a set of packages for which
to get the dependencies, in an attempt to limit the time it took to get
that tree, but we still had to call these functions iteratively, until
they returned no new dependency. This was pretty costly.
Now, getting the tree is much, much less costly, and we can get the
whole tree as cheaply as we previously got only the first-level
dependencies.
Furthermore, we can now also get the version information at the same
time, and that also brings in whether the package is virtual or not,
target or host.
So, we drop all three helper functions, and replace them with a single
one that returns all that information in one go: full dependency trees
(direct and reverse), per-package type, and per-package version.
Note: since commit 2d29fd96a (pkg-virtual: remove VERSION/SOURCE),
virtual packages are no longer reported as having a 'virtual' version,
so have since been displayed as regular packages in the graphs. Although
noone complained, this patch incidentally restores the initial
behaviour, and virtual packages are now correctly displayed as such
again.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We we simplify the dependency graph, we try to remove so-called
mandatory dependencies from each package, and for each mandatory that
was thus removed, reattach it to the root-package of the graph.
This was made so that mandatory dependencies (which are dependencies of
all packages, or at least of a lot of packages) do not clutter the
dependency graph, but that they are still shown in the graph, as
dependencies of the root package.
However, these mandatory dependencies are only _direct_ dependencies.
As such, it does not make sense to reattach a mandatory dependency when
doing a reverse graph. Worse, it can actually be incorrect.
For example, 'skeleton' is a mandatory dependency, and as such is
removed from all packages. But when doing a reverse graph, skeleton is
now in the dependency chain of, e.g. skeleton-init-none; it should then
not be removed.
In short: the notion of mandatory dependencies does not make sense in
the case of a reverse graph.
Consequently, skip over the mandatory dependency removal when doing a
reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-gzip is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-gzip would uselessly
clutter the graph.
So, like for the skeleton, host-skeleton, and host-tar, we cut the
dependency chains toward host-gzip.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-tar is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-tar would uselessly
clutter the graph.
So, like for the skeleton and host-skeleton, we cut the dependency chains
toward host-tar.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-skeleton is a dependency of almost all packages, except a very few.
As such, it clutters the dependency graph uselessly.
Do with it as we do for the skeleton: cut the dependency chains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some times, multiple dependency graphs for a set of packages (mostly
the application-level packages for the project) are included in reports
(e.g. delivery notes). Repeating the mandatory dependencies on all
those graphs is useless and clutters the important dependencies.
When we had only two such mandatory dependencies (toolchain, skeleton),
it was manageable to list them as manual exclusions:
-x toolchain -x skeleton
But we now have quite a few such dependencies, and it becomes a bit more
cumbersome to manage, not counting the ones we may add in the future.
Add an option to exclude all those mandatory dependencies, to generate
neat graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current graph-depends implementation filters out a number of
"mandatory" dependencies that all packages have: dependency on
"toolchain" and dependency on "skeleton".
Despite this filtering, in full graph dependencies, "toolchain" and
"skeleton" are still shown, because they are target packages, and
therefore appear in the result of "make show-targets". Thanks to this,
they will be visible as dependencies of the "ALL" node, which is the
root of the dependency tree.
However, as we are going to introduce host-skeleton as a "mandatory
dependency" to be filtered out, this is no longer going to work.
This commit adjusts the remove_extra_deps() function to ensure that
when a mandatory dependency is removed, this dependency exists between
the root of the dependency tree and the mandatory dependency.
This issue was noticed by Yann E. Morin, and this commit provides a
different implementation than what Yann proposed in
https://patchwork.ozlabs.org/patch/910453/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- list mandatory deps before removing them
- fix flake8 warnings
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a simple "Hello, World" integration test of the OpenJDK
package.
It compiles the Java app on the host, then runs it on an emulated
AARCH64 target and verifies "Hello, World" is printed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 2.29, glibc requires python 3.4 or later to build the
GNU C Library [1].
We add a new check to verify the version of python3 interpreter
installed on the host. If no suitable python3 interpreter is found,
define BR2_PYTHON3_HOST_DEPENDENCY to add host-python3 in package
dependencies when needed.
[1] https://www.sourceware.org/ml/libc-alpha/2019-01/msg00723.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: drop not so useful comment in the .mk file, as suggested by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 81771cfcdc.
The download of sha1 of a special ref currently works or not depending
on the git client version in use.
With git version 2.11.0 (present in the docker image) it does not work.
With git version 2.17.1 it works.
For the sake of reproducibility, remove this part of the TestGitRefs
test case until some code gets added to the download infra to handle
sha1 of a special ref for any git client version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/158295269
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gerbera package in version 1.3 unfortunately now requires CMake >= 3.8
for C++17 macros:
b5fd39f30f
So we need to bump our requirement from 3.1 to 3.8. If the host doesn't
have a CMake >= 3.8, Buildroot will build its own host-cmake package.
Also drop patch that relax cmake requirement on json-for-modern-cpp
Fixes:
- http://autobuild.buildroot.org/results/6405647b47b132ff5d0d211b92d407322d52d507
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit replaces the two RISC-V configurations used for the
autobuilders to use pre-built external toolchains rather than internal
toolchains. This saves quite a bit of build time in the autobuilders,
and also allows people to reproduce build issues in a much more
efficient way, since rebuilding the toolchain is not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All toolchains have been rebuilt with Buildroot 2019.02-rc1.
Changes:
- Toolchains that were using no-longer maintained kernel headers
versions have been changed to use a variety of newer kernel headers
versions (4.4, 4.9 or 4.14).
- Since gcc 7.x is now the default in Buildroot, most toolchains that
simply use the default gcc version use 7.x instead of 6.x.
- br-arm-cortex-a9-glibc uses gcc 8.x, binutils 2.31 and kernel
headers 4.20
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
runc (which is a reverse dependency of docker-engine) is about to gain a
!uclibc dependency, so move to a glibc toolchain instead.
There are currently no prebuilt x86_64 / core2 / glibc toolchains available,
so instead use the internal toolchain backend to build one.
While we are at it, drop the infra.basetest.BASIC_TOOLCHAIN_CONFIG
reference, as that ARM toolchain configuration doesn't make any sense for
this x86-64 based test.
add docker / docker-compose tests
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following flake8 warnings:
support/scripts/pkg-stats:34:2: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:4: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:11: W605 invalid escape sequence '\$'
support/scripts/pkg-stats:34:13: W605 invalid escape sequence '\('
support/scripts/pkg-stats:34:32: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:34:34: W605 invalid escape sequence '\)'
support/scripts/pkg-stats:35:2: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:35:14: W605 invalid escape sequence '\S'
support/scripts/pkg-stats:35:17: W605 invalid escape sequence '\s'
support/scripts/pkg-stats:42:1: E302 expected 2 blank lines, found 1
support/scripts/pkg-stats:587:133: E501 line too long (157 > 132 characters)
Note that the "invalid escape sequence" errors work because Python
leaves the \ in place if it doesn't recognise the escape sequence. But
it's better practice to use a raw string for regular expressions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce support/scripts/check-merged-usr.sh, a script that check if a
given path complies to the merged /usr requirements:
/
/bin -> usr/bin
/lib -> usr/lib
/sbin -> usr/sbin
/usr/bin/
/usr/lib/
/usr/sbin/
Use this script in skeleton-custom.mk instead of a bunch of variables
filled by $(shell ...) macros. The same script will be used to check
rootfs overlays, in a forthcoming change.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds fetching the latest upstream version of each package
from release-monitoring.org.
The fetching process first tries to use the package mappings of the
"Buildroot" distribution [1]. This mapping mechanism allows to tell
release-monitoring.org what is the name of a package in a given
distribution/build-system. For example, the package xutil_util-macros
in Buildroot is named xorg-util-macros on release-monitoring.org. This
mapping can be seen in the section "Mappings" of
https://release-monitoring.org/project/15037/.
If there is no mapping, then it does a regular search, and within the
search results, looks for a package whose name matches the Buildroot
name.
Even though fetching from release-monitoring.org is a bit slow, using
multiprocessing.Pool has proven to not be reliable, with some requests
ending up with an exception. So we keep a serialized approach, but
with a single HTTPSConnectionPool() for all queries. Long term, we
hope to be able to use a database dump of release-monitoring.org
instead.
From an output point of view, the latest version column:
- Is green when the version in Buildroot matches the latest upstream
version
- Is orange when the latest upstream version is unknown because the
package was not found on release-monitoring.org
- Is red when the version in Buildroot doesn't match the latest
upstream version. Note that we are not doing anything smart here:
we are just testing if the strings are equal or not.
- The cell contains the link to the project on release-monitoring.org
if found.
- The cell indicates if the match was done using a distro mapping, or
through a regular search.
[1] https://release-monitoring.org/distro/Buildroot/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace all YAML anchors with the new "extends" keyword because it is
more readable and more flexible (it works across configuration files
combined with the new "include" keyword).
Readability is more meaningful in .gitlab-ci.yml.in.
In the part of .gitlab-ci.yml that is auto-generated by 'make
.gitlab-ci.yml' keep the keyword in the same line of the job name.
So instead of this:
zynqmp_zcu106_defconfig:
extends: .defconfig
tests.boot.test_atf.TestATFAllwinner:
extends: .runtime_test
Use this:
zynqmp_zcu106_defconfig: { extends: .defconfig }
tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
Do this to to keep .gitlab-ci.yml easier to be post-processed by a
script.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a special ref to the static repo and check on the git refs test case
the download of a git package:
- with the sha1 of a special ref as version;
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: change to use the sha1 of a special ref instead of the name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a tag to the static repo and check on the git refs test case the
download of a git package:
- with the name of a tag as version;
- with the sha1 of a tag itself as version;
- with the partial sha1 of a tag itself as version;
- with the sha1 of a commit pointed by a tag as version;
- with the partial sha1 of a commit pointed by a tag as version;
- with the sha1 of a commit reachable only by a tag as version;
- with the partial sha1 of a commit reachable only by a tag as version.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Enables the test to use the new non-emulator base class which takes
significantly less test time.
Cc: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The git tests don't need to do a full build, they only need to do a
configure and download and/or legal-info. More tests of that type will
be added in the future. Therefore, we want to have a test base class
that doesn't automatically do a full build in the setUp().
Add this new class as a superclass of the existing BRTest class, so we
don't need to update existing tests. Only the code in run-tests that
iterates over all subclasses of BRTest has to be adapted to use
BRConfigTest instead.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two submodules as static repos, add a branch to the main static repo
and check on the git refs test case the download of a git package:
- repo with submodule but without support in the package;
- repo with recursive submodules with support in the package.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: remove handling of inconsistent tarball hashes - that's an
actual bug that should be fixed]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Build for x86-64 as public containers in general are only available for
x86-64. Docker needs a number of kernel options enabled, so use a custom
kernel config based on the qemu one.
Docker needs entropy at startup, so enable the virtio-rng-pci device to
expose entropy to the guest. The default RAM amount (128M) is not enough to
run docker / docker-compose, so bump to 512MB.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The scp download helper is broken when the server URL starts with 'scp://'.
Such prefix is used in two situations:
1. to let FOO_SITE point to an scp location without explicitly having to set
'FOO_SITE_METHOD = scp'
2. when BR2_PRIMARY_SITE or BR2_BACKUP_SITE points to an scp location. In
this case, there is no equivalent of 'SITE_METHOD'.
Strip out the scheme prefix, similarly to how the 'file' download helper
does it. That helper has the same cases as above.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The password is used in multiple places, so add a constant for it instead of
hardcoding it multiple times.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a branch to the static repo and check on the git refs test case the
download of a git package:
- with a sha1 reachable by a branch name, but not pointed by it, as
version. This is the most common use case for git refs in the tree;
- with a partial sha1 of a commit reachable by a branch as version;
- with a sha1 of the commit head of a branch as version;
- with a partial sha1 of the commit head of a branch as version;
Enforce the download always occurs by removing the BR2_DL_DIR used for
the tarballs generated by the git download infra.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
setlocalversion will use 'hg id' to determine whether or not the current
revision is tagged. If there is no tag, the Mercurial revision is printed,
otherwise nothing is printed.
The problem is that the user may have custom configuration settings (in
their ~/.hgrc file or similar) that changes the output of 'hg id' in a way
that the script does not expect. In such cases, the Mercurial revision may
not be printed or printed incorrectly.
It is good practice to ignore the user environment when calling Mercurial
commands from a well-defined script, by setting the environment variable
HGRCPATH to the empty string. See also 'hg help environment'.
In the particular case of Nokia, a custom extension adds dynamic tags in the
repository, i.e. tags that are stored in a file external to the repository
and only visible when the extension is active. These tags should not
influence the behavior of setlocalversion as they are not official Buildroot
tags, i.e. even if a revision is tagged, the Mercurial revision should still
be printed.
Note that this still does not solve the problem where an organization adds
_real_ tags in their Buildroot repository. For example, there might be a
moving tag 'last-validated' or tags indicating in which product release that
Buildroot revision was used. In these cases, setlocalversion will still not
behave as expected, i.e. show the Mercurial revision.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When Buildroot is stored in a Mercurial repository on a branch other than
'default' ('master' in git terms), setlocalversion (used to populate
/etc/os-release) will incorrectly think that this is a tagged version and
will NOT print out the revision hash.
This is due to the fact that the output of 'hg id' is assumed to be
"<revision> <tags-if-any>"
but when on a branch it actually is:
"<revision> (<branch>) <tags-if-any>"
To let setlocalversion receive the output it expects, explicitly ask 'hg id'
to retrieve only the revision hash and any tags, ommitting any branch
information.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All upcoming tests for git refs will rely on the return code of make to
determine whether a git ref can be downloaded or not and also to
determine whether the downloaded content is correct (all of this taking
advantage of the check-hash mechanism already in place for git
packages).
So to avoid false results i.e. in the case the check-hash mechanism
become broken in the master branch, add some sanity checks before the
actual test of download git refs.
Add the minimum test case for git refs containing only sanity checks.
Reuse the commit in the static repo.
Add a br2-external with two packages to check that:
- trying to download an invalid sha1 generates an error;
- downloading a valid sha1 that contains unexpected content generates
an error.
In order to ease the maintenance and review, each upcoming patch adding
checks to this test case will add at same time the commits to the static
repo, the equivalent packages to the br2-external and code to the test
case.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add one test case to ensure the hash is checked for git packages:
- correct hash;
- wrong hash;
- no hash file.
Add required infra:
- a GitRemote class, that can start a git server in the host machine to
emulate a remote git server under the control of the test;
- a new base class, called GitTestBase, that inherits from BRTest and
must be subclassed by all git test cases.
Its setUp() method takes care of configuring the build with a
br2-external, avoiding to hit http://sources.buildroot.net by using
an empty BR2_BACKUP_SITE. It also avoids downloading not
pre-installed dependencies (i.e. lzip) every time by calling 'make
dependencies' using the common dl directory, and it instantiates the
GitRemote object.
Besides the Python scripts, add some fixtures used during the tests:
- a br2-external (git-hash) with one package for each part of the test
case;
- a static git bare repo (repo.git) to be served using GitRemote class.
Neither the br2-external nor the check hash functionalities are the
subject of these tests per se, so for simplicity limit the check to the
error codes and don't look for the messages in the log.
Thanks to Arnout for the hint about how to add a bare repo to test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: split long line; reorder imports to satisfy flake8]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a config option which will force buildroot to
build all host dependencies even if they are already present on the
host system. This may be a desirable option if different hosts are
used to build the same source. In this case, some packages will be
built on one host that are not built on another. This is problematic
if build source archives are cached afterwards for offline builds.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Peter: reword, drop exit 1, reshuffle]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The color for 'extract' is very similar to the one for 'install-images'.
Both are cyan-like.
Replace the former by a pale blue to make all colors sufficiently distinct.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Total build time also involves download. Getting a visibility on the impact
of that step can be important for users/admins, e.g. to evaluate different
methods of BR2_PRIMARY_SITE.
Colors used are some kind of purple (primary scheme) and light orange
(alternate scheme).
Signed-off-by: Mathias De Maré <mathias.de_mare@nokia.com>
[ThomasDS: rebase and update colors to avoid confusion]
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Older distributions such as CentOS6 come with python2.6, which causes build
failures in packages such as host-libglib2 because they require python2.7 and
above.
host-libglib2 will produce the error message:
/bin/sh: python2.7: command not found
Python2.7 is a hard-coded value in configure.ac. If one changes the value to
just "python," the following stack trace is produced:
Traceback (most recent call last):
File "./gdbus-2.0/codegen/gdbus-codegen.in", line 55, in <module>
self.outfile.write(LICENSE_STR.format(config.VERSION))
ValueError : sys.exit(codegen_main.codegen_main())
zero length field name in format
Instead of supporting an ancient version of Python that had its support ended
in October os 2013, it would be more pragmatic only to support Python2.7 and
above.
Luckily; CentOS6 has the centos-release-scl repository, which allows users to
install python2.7, and Debian 8 comes with Python2.7 already, making this patch
relatively low impact.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Peter: only look at major.minor to handle x.y.z with z < 10]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some upcoming test cases can use one or more br2-external trees as
fixtures that provide packages used only in runtime tests.
Add support for br2-external into the BRTest class. Any test case can
then provide a list of paths for being used as br2-external trees
during the build of the image to test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Daniel J. Leach <dleach@belcan.com>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: use named argument for make_extra_opts.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make the builder able to call 'VAR1=1 make VAR2=2 target'.
Allow sending extra parameters to be added to the end of make command
line. Uses for these purposes:
- to configure a br2-external, using the 'BR2_EXTERNAL="dir" variable.
- to specify a make target, such as 'foo-source.'
Allow adding variables to the environment when calling make.
These added variables allow a user to override default values from BuildRoot,
such as 'BR2_DL_DIR="dl"'.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Daniel J. Leach <dleach@belcan.com>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As suggested by Arnout Vandecappelle, let's document the
elf_needs_rpath() and check_elf_has_rpath() functions, before we make
them a bit more complicated with per-package directory support.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 36568732e4, we expanded toolchain.cmake to also define the value for
CMAKE_SYSTEM_VERSION, as the cmake documentation states that it must be
manually defined when doing cross-compilation [0]:
When the CMAKE_SYSTEM_NAME variable is set explicitly to enable
cross compiling then the value of CMAKE_SYSTEM_VERSION must also
be set explicitly to specify the target system version.
However, the fix in 36568732e4 uses the version of the kernel headers,
assuming that would be the oldest kernel we could run on. Yet, this is
not the case, because glibc (for example) has fallbacks to support
running on kernels older than the headers it was built against.
The cmake official wiki [1] additionally states:
* CMAKE_SYSTEM_VERSION : optional, version of your target system, not
used very much.
Folllowed a little bit below, by:
* CMAKE_TOOLCHAIN_FILE : absolute or relative path to a cmake script
which sets up all the toolchain related variables mentioned above
For instance for crosscompiling from Linux to Embedded Linux on PowerPC
this file could look like this:
# this one is important
SET(CMAKE_SYSTEM_NAME Linux)
#this one not so much
SET(CMAKE_SYSTEM_VERSION 1)
[...]
Furthermore, using the kernel headers version can be a bit misleading (as
it really looks like is is the correct version to use when it is not),
while it is obvious that 1 is not really the output of `uname -r` and
thus is definitely not misleading.
Finally, random searches [2] about CMAKE_SYSTEM_VERSION, mostly only
turns up issues related with Windows, Mac-OS, and to a lesser extent,
Android (where it is forcibly set to 1), with issues realted to running
under just Linux (as opposed to Adnroid) mostly non-existent.
Consequently, we revert to using the value that is suggested in the
cmake WiKi, i.e. 1, and which is basically what we also used as a
workaround in the azure-iot-sdk-c paclkage up until d300b1d3b1.
A case were we will need to have a real kernel version, is if we one day
have a cmake-based pacakge that builds and installs a kernel module [3],
because it will need the _running_ kernel version to install it in
/lib/modules/VERSION/, but in that case it will anyway most probably
not be the headers version.
[0] https://cmake.org/cmake/help/v3.8/variable/CMAKE_SYSTEM_VERSION.html
[1] https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/CrossCompiling
[2] https://duckduckgo.com/?q=CMAKE_SYSTEM_VERSION
[3] https://stackoverflow.com/questions/38205745/cmake-system-version-not-updated-for-new-kernel
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quoting the CMake documentation:
When the CMAKE_SYSTEM_NAME variable is set explicitly to enable cross
compiling then the value of CMAKE_SYSTEM_VERSION must also be set
explicitly to specify the target system version.
Thus, we should also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake. It
is supposed to be set to the value of `uname -r` on the target. We don't
have that exact value available (unless we build the kernel), but the
value of BR2_TOOLCHAIN_HEADERS_AT_LEAST contains the (minimum) version
of the kernel it will run on, so it should be OK for all practical
purposes.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a minimal RISC-V 32-bit autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This enables a riscv32 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This requires a custom version of glibc 2.26 from the riscv-glibc
repository. Note that there are no tags in this repository, so the
glibc version just consists of the 40 character commit id string.
Thanks to Fabrice Bellard for pointing me towards the 32-bit glibc
repository and for providing the necessary patch to get it to build.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
scp download is broken, because scp is called without filename argument and
only the server is specified. The call is:
scp <server> <outputfile>
but should be:
scp <server>/<filename> <outputfile>
Instead of assuming '-u' lists a full URL including filename (which it is
not), align with the wget helper where -u is the server URL and -f gives the
filename.
With this commit, an scp download can work if FOO_SITE_METHOD is explicitly
set to 'scp' and the server does not have a scheme prefix 'scp://'.
The next commit will handle the case where a scheme prefix is present.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: s/URL/URI/, as noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GitLab has severe limitations imposed to triggers.
Using a variable in a regexp is not allowed:
| only:
| - /-$CI_JOB_NAME$/
| - /-\$CI_JOB_NAME$/
| - /-%CI_JOB_NAME%$/
Using the key 'variables' always lead to an AND with 'refs', so:
| only:
| refs:
| - branches
| - tags
| variables:
| - $CI_JOB_NAME == $CI_COMMIT_REF_NAME
would make the push of a tag not to trigger all jobs anymore.
Inheritance is used only for the second level of keys, so:
|.runtime_test: &runtime_test
| only:
| - tags
|tests.package.test_python_txaio.TestPythonPy2Txaio:
| <<: *runtime_test
| only:
| - /-TestPythonPy2Txaio$/
would override the entire key 'only', making the push of a tag not to
trigger all jobs anymore.
So, in order to have a trigger per job and still allow the push of a tag
to trigger all jobs (all this in a follow up patch), the regexp for each
job must be hardcoded in the .gitlab-ci.yml and also the inherited
values for key 'only' must be repeated for every job.
This is not a big issue, .gitlab-ci.yml is already automatically
generated from a template and there will be no need to hand-editing it
when jobs are added or removed.
Since the logic to generate the yaml file from the template will become
more complex, move the commands from the main Makefile to a script.
Using Python or other advanced scripting language for that script would
be the most versatile solution, but that would bring another dependency
on the host machine, pyyaml if Python is used. So every developer that
needs to run 'make .gitlab-ci.yml' and also the docker image used in the
GitLab pipelines would need to have pyyaml pre-installed.
Instead of adding the mentioned dependency, keep using a bash script.
While moving the commands to the script:
- mimic the behavior of the previous make target and fail on any
command that fails, by using 'set -e';
- break the original lines in one command per line, making the diff for
any patch to be applied to this file to look nicer;
- keep the script as simple as possible, without functions, just a
script that executes from the top to bottom;
- do not perform validations on the input parameters, any command that
fails already makes the script to fail;
- do not add an usage message, the script is not intended to be called
directly.
This patch does not change functionality.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Thomas: make the script output on stdout rather than take the output
file name as second argument.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 38de434123 ("download: fix file:// BR2_PRIMARY_SITE
(download cache)"), the urlencode option is no longer passed to the
download backend, because we use ${backend} instead of
${backend_urlencode}.
We must get the urlencode information from backend_urlencode.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having a docstring in the test_run() method clutters the "run-tests
-l" output:
test_run (tests.package.test_python_crossbar.TestPythonPy3Crossbar)
Test a python package. ... ok
[...]
test_run (tests.package.test_python_pexpect.TestPythonPy2Pexpect)
Test a python package. ... ok
test_run (tests.package.test_python_pexpect.TestPythonPy3Pexpect)
Test a python package. ... ok
test_run (tests.package.test_python_twisted.TestPythonPy2Twisted)
Test a python package. ... ok
test_run (tests.package.test_python_twisted.TestPythonPy3Twisted)
Test a python package. ... ok
test_run (tests.package.test_python_pynacl.TestPythonPy2Pynacl)
Test a python package. ... ok
test_run (tests.package.test_python_pynacl.TestPythonPy3Pynacl)
Test a python package. ... ok
So let's simply drop this docstring that is not particularly useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This array will be re-used in another function in a follow-up commit,
so it makes sense to factor it out.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The remove_extra_deps() function removes dependencies that we are not
interested in seeing in the dependency graph. It does this for all
packages, except the 'all' package, which on full dependency graphs is
the root of the tree.
However, this doesn't take into account package-specific dependency
graphs (i.e make <pkg>-graph-depends) where the root is not 'all', but
'<pkg>'. Due to this, dependencies on "mandatory deps" were not
visible at all, i.e the toolchain package (and its dependencies) and
the skeleton package (and its dependencies) were not displayed in
package-specific dependency graphs.
To fix this, we use the existing rootpkg variable instead of
hardcoding 'all'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we avoid drawing the dependencies that we call 'target
exceptions', becasue they initially were returned by 'show-targets',
when they in fact were not really packages and thus should not be on
the graph.
However, those two exceptions have no longer been reported in the output
of show-targets since we merged very old initial top-level parallel
build way back in 2014, with commit a24877586a (Makefile: add support
for top-level parallel make), where they had been converted into purely
internal rules.
4 years have passed, we can now drop those exceptions from the
graph-depends script.
This concludes the cleanup initiated three years ago with commit
0b32791f00 (graph-depends: remove absent targets from
TARGET_EXCEPTIONS).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to install grub2 support tools to the target.
In the context of Buildroot, some useful target tools provided are
grub2-editenv, grub2-reboot, which provide means to manage the grub2,
environment, boot order, and others.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Inside the check_elf_has_rpath(), we check if the host binary has a
correct RPATH, which should be either an absolute path to
$(HOST_DIR)/lib, or a relative path using $ORIGIN. Those two
conditions are checked in a single statements, but as we are going to
add a third condition, let's split this up a bit:
- If we have a RPATH to $(HOST_DIR)/lib -> we're good, return 0
- If we have a RPATH to $ORIGIN/../lib -> we're good, return 0
- Otherwise, we will exit the loop, and return 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recently, some hash mismatch have been reported, both by users as well
as autobuilder failures, about tarballs generated from git repositories.
This turned out to be caused by users having the 'gzip' command somehow
aliased to 'pigz' (which stand for: parallel implementation of gzip,
which takes advantage of multi-processor system to parallelise the
compression).
Unfortunately, the output of pigz-compressed archives differ from that
of gzip (even though they *are* valid gzip-compressed streams).
Add a dependency check that ensures that gzip is not pigz. If that is
the case, define a conditional dependency to host-gzip, that is used as
a download dependency for packages that will generate compressed files,
i.e. cvs, git, and svn.
Fixes:
http://autobuild.buildroot.org/results/330/3308271fc641cadb59dbf1b5ee529a84f79e6d5c/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Marcin Niestrój <m.niestroj@grinn-global.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when we detect that tar is BSD-tar, we fake an unsupported
version (major, minor) and rely on the version check to reject BSD-tar.
There is no reason to use such shenanigans, when we can simply reject it
from the onset.
Simplify the logic:
- use positive logic in the condition
- directly exit in error
Also, comment that case like the other cases are commented.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Graphviz' dot utility does not like nodes which names does not start
with an ^[[:alpha:]], i.e. 18xx-ti-utils would cause grievance:
Warning: syntax ambiguity - badly delimited number '18x' in line 4 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 5 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 6 [...]/graph-depends.dot splits into two tokens
Warning: syntax ambiguity - badly delimited number '18x' in line 7 [...]/graph-depends.dot splits into two tokens
Prefix nodes with an underscore to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are using empty CONFIG_PREFIX_. This results in false positive match
for comment lines when merging config fragments.
To avoid false positive reports, we use separate sed expressions and
address comment lines explicitly.
This is actually is in the Linux kernel mainline (v4.20-rc2):
6bbe4385d035c6fac56f840a59861a0310ce137b
("kconfig: merge_config: avoid false positive matches from comment lines")
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch allows us to define config prefix with CONFIG_ environment
variable.
By setting the proper config prefix, we will have proper 'redundant
configuration warnings' when we use '-r -m' options.
This is actually already in mainline for v4.20-rc1:
2cd3faf87d2d8f6123adf34741b9a7b98828a76f
("merge_config.sh: Allow to define config prefix")
Signed-off-by: Nasser Afshin <afshin.nasser@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage, storing a dict into a
file and then retrieving the dict from the file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a simple script to check the basic usage. The target has no https
server, so a connection from in the target to localhost must not
succeed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage by calling 'ls' and
checking the output.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage, storing a dict into a
file and then retrieving the dict from the file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that minimally uses the module.
Add haveged to the target to generate enough entropy so pynacl ->
libsodium don't hang waiting for /dev/random.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage. Call 'login' and try
wrong user/password, expecting the 'Login incorrect' message.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that creates a hash for a password and verifies
it against an incorrect and a correct password.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage by creating a class with
two constants.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a simple script to check the basic usage. Since this package
provides command line arguments, override run_sample_scripts to call the
script with arguments and check the expected output.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage, storing a dict into a
file and then retrieving the dict from the file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case to check the basic usage by checking the
corresponding representation of a 12-bit decimal number in hex, binary
and integer.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a minimal script to check the basic usage by creating and using a
small state machine.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a minimal script to check the basic usage creating a class with 2
attributes.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a simple script to check the basic usage. Since this package
provides command line arguments, override run_sample_scripts to call the
script with arguments and check the expected output.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit "2927f412be support/testing: standardize defconfig
fragments style" all other test cases use the same style for defconfig
fragments:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Do the same here for consistency.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/e29/e293aadc692d2ed337881ef2172ddf66a60bc05c/
And many more.
Install as 'host-make' rather than just 'make', as that otherwise confuses a
number of packages when they invoke recursive / sub-make. The internal job
control logic of GNU make is version dependant, so mixing versions may lead
to issues like:
make[1]: Entering directory `/home/peko/autobuild/instance-0/output/build/boa-0.94.14rc21'
(cd src && make -w --jobserver-fds=5,6 -j)
make: unrecognized option '--jobserver-fds=5,6'
With this rename, only packages explicitly opting in for our host-make
(using the BR2_MAKE / BR2_MAKE_HOST_DEPENDENCY logic) will use it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test invokes "crossbar version" command, that checks all
dependencies found in setup.py files and prints some system related
information.
Add haveged to the target to generate enough entropy so crossbar ->
pynacl -> libsodium don't hang waiting for /dev/random.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Ricardo: move test script to a separate file, remove Python 2 variant,
add haveged to target to add entropy and avoid hanging]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the test script to be run on the target from inline in the test
case to a separate file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the test scripts to be run on the target from inline in the test
case to a separate file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the test script to be run on the target from inline in the test
case to a separate file.
Get the base defconfig fragment from the immediate parent class and not
directly from TestPythonBase because it is the correct way of doing
this. This way the base class TestPythonTwisted could even be placed in
a separate file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the test script to be run on the target from inline in the test
case to a separate file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the test script to be run on the target from inline in the test
case to a separate file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the test script to be run on the target from inline in the test
case to a separate file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Test cases for python packages are very similar among each other: run a
simple script in the target that minimally tests the package.
So create a new helper class named TestPythonPackageBase that holds all
the logic to run a script on the target.
TestPythonPackageBase adds in build time one or more sample scripts to
be run on the target. The test case for the python package must
explicitly list them in the "sample_scripts" property. The test case
then automatically logins to the target, checks the scripts are really
in the rootfs (it calls "md5sum" instead of "ls" or "test" in an attempt
to make the logfile more friendly, since someone analysing a failure can
easily check the expected script was executed) and then calls the python
interpreter passing the sample script as parameter.
An optional property "timeout" exists for the case the sample script
needs more time to run than the default timeout from the test infra
(currently 5 seconds).
A simple test case for a package that only supports Python 2 will look
like this:
|from tests.package.test_python import TestPythonPackageBase
|
|
|class TestPythonPy2<Package>(TestPythonPackageBase):
| __test__ = True
| config = TestPythonPackageBase.config + \
| """
| BR2_PACKAGE_PYTHON=y
| BR2_PACKAGE_PYTHON_<PACKAGE>=y
| """
| sample_scripts = ["tests/package/sample_python_<package>.py"]
| timeout = 15
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 118534fe54 (fs: use a common tarball as base for the other
filesystems), the filesystem creation is split in two steps, using an
intermediate tarball to carry the generic, common finalisations to the
per-filesystem finalisation and image creation.
However, this intermediate tarball causes an issue with capabilities:
they are entirely missing in the generated filesystems.
Capabilities are stored in the extended attribute security.capability,
which tar by default will not store/restore, unless explicitly told to,
e.g. with --xattrs-include='*', which we don't pass.
Now, passing this option when creating and extracting the intermediate
tarball, both done under fakeroot, will cause fakeroot to report an
invalid filetype for files with capabilities. mksquashfs would report
such unknown files as a warning, while mkfs.ext2 would fail (with a
similar error message), e.g.:
File [...]/usr/sbin/getcap has unrecognised filetype 0, ignoring
This is due to a poor interaction between tar and fakeroot; running as
root the exact same commands we run under fakeroot, works as expected.
Unfortunately, short of fixing fakeroot (which would first require
understanding the problem in there), we don't have much options.
The intermediate tarball was made to avoid redoing the same actions over
and over again for each filesystem to build. However, most of the time,
only one or two such filesystems would be enabled [0], and those actions
are usually pretty lightweight. So, using an intermediate tarball does
not provide a big optimisation.
The main reason to introduce the intermediate tarball, however, is that
it allows to postpone per-filesystem finalisations to be applied only
for the corresponding filesystem, not for all of them.
So, we get rid of the intermediate tarball, and simply move all of the
code to run under fakeroot to the per-filesystem fakeroot script.
Instead of extracting the intermediate tarball, we just rsync the
original target/ directory, and apply the filesystem finalisations on
that copy. The only thing still done in the rootfs-common step is to
generate the intermediate files (users file, devices file) that are used
in the fakeroot script.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11216
Note: an alternate solution would have been to keep the intermediate
tarball to keep most of the common finalisations, and move only the
permissions to each filesystem, but that was getting a bit more complex
and changed the ordering of permissions and post-fakeroot scripts. Once
we bite the bullet of having some common finalisation done in each
filesystem, it's easier to just move all of them.
[0] Most probsably, users would enable the real filesystem to put on
their device, plus the 'tar' filesystem, to be able to easily inspect
the content on their development machine.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit fixes the following flake8 warnings:
support/testing/tests/fs/test_f2fs.py:6:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:12:1: E302 expected 2 blank lines, found 1
support/testing/tests/fs/test_f2fs.py:38:23: E225 missing whitespace around operator
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Suppose we use Makefile wrapper and build some project out of
buildroot tree (O=...). A command like "make
busybox-all-external-deps" will output the string "uname 022 && make
..." to stdout before the usefull information. It pollutes stdout. At
the same time if we use the same command in the buildroot source-tree
then we don't get the additional output. This patch makes wrapper
silent by default. People who prefer to see more verbose output can
use V=1.
Signed-off-by: Serj Kalichev <serj.kalichev@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6eacea5ae0 accidentally removed these changes in merge_config.sh:
0f56304521 ("merge_config.sh: create temporary files in /tmp")
28fac3973b ("merge_config.sh: add br2-external support")
Changes were lost because commits just changed files, but didn't add patches.
Therefore not only restore our changes, but also add (updated) patches.
Missing 0f56304521 caused breaking merge_config.sh when used in out of
tree build:
$ make -C buildroot O=$PWD/output defconfig
...
$ cd output
$ echo 'BR2_TARGET_GENERIC_HOSTNAME="test"' > test.frag
$ ../buildroot/support/kconfig/merge_config.sh .config test.frag
Using .config as base
Merging test.frag
umask 0022 && make -C /home/test/buildroot O=/home/test/output/. alldefconfig
GEN /home/test/output/Makefile
*** Can't read seed configuration "./.tmp.config.qIcpASpUyh"!
make[1]: *** [Makefile:925: alldefconfig] Error 1
make: *** [Makefile:16: _all] Error 2
Fixes: 6eacea5ae0 support/kconfig: bump to kconfig from Linux 4.17-rc2
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reported-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
which was specified, but not added during last update.
Fixes: 6eacea5ae0 ("support/kconfig: bump to kconfig from Linux 4.17-rc2")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Resolves:
support/testing/tests/core/test_hardening.py:25:42: E231 missing whitespace after ','
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a minimal RISC-V 64-bit autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Catch the commonly used options of SSP, Relro, and fortify.
Using the package targets of busybox and lighttpd. This
can easily be expanded to a larger list.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test case uses a too old U-Boot version, which is affected by the
infamous libfdt header conflict issue. We update U-Boot and ATF to
what is used in the current version of
solidrun_macchiatobin_mainline_defconfig, for which the problem no
longer exists.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/107860312
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This test case uses a too old U-Boot version, which is affected by the
infamous libfdt header conflict issue. Let's update to U-Boot 2017.11,
which is used by our current bananapi_m64_defconfig that was the
inspiration for this test case.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/107860310
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a minimal script to listen to a port and check using netstat.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: increase the delay after starting the Twisted server, as 5
seconds was not enough for Python 3.x configurations.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module and asserts a version
string for a fake package is generated.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module to use with twisted in
Python 2 and with asyncio in Python 3.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the timestamps that we keep in build-time.log use a
second-level precision. However, as we are going to introduce a new
type of graph to draw the time line of a build, this precision is
going to be insufficient, as a number of steps are so short that they
are not even one second long, and generally the rounding to the second
gives a not so great looking graph.
Therefore, we add to the timestamps the nanoseconds using the %N date
specifier. A milli-second precision would have been sufficient, but %N
is all what date(1) provides at the sub-second level.
Since this is changing the format of the build-time.log file, this
commit adjusts the support/scripts/graph-build-time script
accordingly, to account for the floating point numbers that we have as
timestamps.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds a pool of worker threads to accelerate connection testing.
~7.5MB and 2% CPU per thread on a Intel i5-3230M CPU @ 2.60GHz.
Runtime is ~3min in parallel vs ~15min.
CC: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Adds support to check if a package has a URL and if that URL
is valid by doing a header request.
- Reports this information as part of the generated html output
The URL data is currently gathered from the URL string provided
in the Kconfig help sections for each package.
This check helps ensure the URLs are valid and can be used
for other scripting purposes as the product's home site/URL.
CPE XML generation is an example of a case that could use this
product URL as part of an automated update generation script.
CC: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the function add_one_group is called on an existing group,
make sure the members of this group are not removed in the process of
deleting then re-adding the group.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add curly braces when referencing ${members}, as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file uses leading spaces, not TABs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The host make program is already checked by dependencies.sh but we
want to check the version number even if Buildroot is able to use
GNU make >= 3.81 but some packages may require a more recent version.
For example, since version 2.28 [1], glibc requires GNU Make >= 4.0.
For packages requiring make >= 4.0, the package makefile must use:
<PKG>_DEPENDENCIES = $(BR2_MAKE_HOST_DEPENDENCY) ...
<PKG>_MAKE = $(BR2_MAKE)
BR2_MAKE1 is also available if needed.
[1] https://www.sourceware.org/ml/libc-alpha/2018-08/msg00003.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: remove extraction of "bugfix" part of the version, since it's
not used anywhere.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
wget is the only downloader currently usable with BR2_PRIMARY_SITE, and that
doesn't work at all for file:// URLs. The symptoms are these:
support/download/dl-wrapper -c '2.4.47' -d '/PATH/build/sw/source/attr' -D '/PATH/build/sw/source' -f 'attr-2.4.47.src.tar.gz' -H 'package/attr//attr.hash' -n 'attr-2.4.47' -N 'attr' -o '/PATH/build/sw/source/attr/attr-2.4.47.src.tar.gz' -u file\|urlencode+file:///NFS/buildroot_dl_cache/attr -u file\|urlencode+file:///NFS/buildroot_dl_cache -u http+http://download.savannah.gnu.org/releases/attr -u http\|urlencode+http://sources.buildroot.net/attr -u http\|urlencode+http://sources.buildroot.net --
file:///NFS/buildroot_dl_cache/attr/attr-2.4.47.src.tar.gz: Unsupported scheme `file'.
ERROR: attr-2.4.47.src.tar.gz has wrong sha256 hash:
ERROR: expected: 25772f653ac5b2e3ceeb89df50e4688891e21f723c460636548971652af0a859
ERROR: got : e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
In the case of custom Linux kernel versions, this is fatal, because there isn't
necessarily a hash file to indicate that wget's empty tarball is wrong.
This seems to have been broken by commit c8ef0c03b0, because:
1. BR2_PRIMARY_SITE always appends "urlencode" (package/pkg-download.mk)
2. Anything with the "|urlencode" suffix in $uri will end up using wget due to
the backend case wildcarding.
3. The wget backend rejects file:/// URLs ("unsupported scheme"), and we end up
with an empty .tar.gz file in the downloads directory.
Fix that by shell-extracting the backend name from the left of "|". I'm not
positive if all URLs will have a "|", so this code only looks for a "|" left of
the "+".
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch updates the vagrant box to ubuntu bionic 64 and switches back
to the official ubuntu image cause the issues with the official image
are now solved.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While integrating proxy support in builder.py, a log flush
was left in the code. This commit cleans/removes that code.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow builder.py to inherit the system proxy settings from
the env if they are present.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The download wrapper is a purely internal helper, and is not supposed to
be callable manually. No need to offer some help.
Besides, the help text was way out-dated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With cmake packages, we are only using TARGET_LDFLAGS for executables
and not for shared libraries.
This patch adds CMAKE_SHARED_LINKER_FLAGS and
CMAKE_MODULE_LINKER_FLAGS to the cmake toolchain file so that
buildroot TARGET_LDFLAGS are used for shared and module libraries.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the i686 package list to install when using pre-built 32 bits
binaries with a redhat/fedora host distribution (glibc.i686 and
zlib.i686).
Signed-off-by: David De Grave (Essensium/Mind) <david.degrave@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All pre-built Buildroot toolchains have been rebuilt with Buildroot
2018.05, so this commit updates the corresponding configuration
fragments to make sure the autobuilders use the new toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we install flake8 and its dependencies via pip. We
tried to be reproducible by pinning the version of those python
packages, but we did forget quite a few of them, and thus some
dependencies for flake8 are installed as uncontrolled versions.
Furthermore, before we install flake8 and its dependencies, we
forcibly update pip, setuptools, and wheels packages to their
latest versions. This explicitly breaks reproducibility.
While we could enforce a specific version of all those packages
and still grab them from PyPI, we can simply grab them from the
distribution-provided packages instead.
Since we're using a pinned version of stretch, this already
guarantees we'll reproducibly get the same versions over and
over again. Besides, we just need to list flake8 as a package to
install to automatically get all its dependencies (again, in a
reproducible way).
This has the slight unfortunate drawback of downgrading flake8
to version 3.2.1, from version 3.5.0, as well as downgrading a
few of flake8's dependencies, as noticed by Ricardo:
http://lists.busybox.net/pipermail/buildroot/2018-May/222376.html
However, as Ricardo said, there isn't "any serious limitation of
this old version, the release notes for a version in the between
mentions 'Dramatically improve the performance' but we have a
limited number of scripts and running on Gitlab for all of them
still takes less than 5 minutes".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As suggested in the docker best practices [0], order the package list
alphabetically, and list only one package per line.
This will be much usefull later, we need to update the list of installed
packages, like adding new ones for example.
[0] https://docs.docker.com/develop/develop-images/dockerfile_best-practices/#sort-multi-line-arguments
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix three issues with code style in our test infra:
- 'print' is now a function,
- exceptions need to be caught-assigned with the 'as' keyword,
- old-style "%s"%() formatting is deprecated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: drop indices in format strings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
