Since kernel 4.15 the wandboard rev D1 variants are supported.
Add support for them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2018.01 version and kernel to 4.15.1.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2018.01 version and kernel to 4.15.1.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update Linux kernel version to 4.15 and
Linux headers version to 4.15.
Also patches for arc vdk are removed because these
changes were applied in Linux 4.15.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 4.15 and U-Boot to 2018.01. Remove networking dts patches
since they has landed in Linux 4.15. Update readme.txt: fix mainline BSP
versions and update boot selection for board rev 1.3.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 4.15 and U-Boot to 2018.01. Enable dhcp for eth0 since
Ethernet support for Allwinner H2/H3 SoCs has landed in Linux 4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 4.15 and U-Boot to 2018.01. Enable dhcp for eth0 since
Ethernet support for Allwinner H2/H3 SoCs has landed in Linux 4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.01 and kernel to 4.14.4 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.01 and kernel to 4.14.4 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.01 and kernel to 4.14.4 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.01 and kernel to 4.14.13 version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to 2017.11 and kernel to 4.14.13 versions.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a genimage.cfg to create a working sdcard.img for the ci20
hardware. We also need a uboot-env.txt to create the partition for
the uboot environment.
Update the board/ci20/readme.txt with the related information. Remove
the tftp netboot description from the readme as it is already to
complicated for a basic bootable example.
Signed-off-by: Johannes Schmitz <johannes.schmitz1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently in Orange Pi boards post-build script is used only to generate
U-Boot boot script and post-image script is used only to generate sdcard
image according to genimage configuration. However both those tasks can
now be handled by generic Buildroot tools:
- BR2_TARGET_UBOOT_BOOT_SCRIPT config options
- support/scripts/genimage.sh script
This patch drops custom scripts replacing them
by generic Buildroot tools.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also include new boot scripts to match standard distro uboot commands.
Our previous 6x_bootscript and 6x_upgrade used custom variables and
their naming don't make sense now that we target more than i.MX6 CPU.
Therefore those old scripts are marked as legacy and kept for now but
the goal is to deprecate and remove them later.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently based upon 4.9.74 stable release.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also switch repository from old freescale site to codeaurora:
https://source.codeaurora.org/external/imx/
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to U-Boot 2017.11 and kernel to 4.14.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to U-Boot 2017.11 and kernel to 4.14.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Orangepi PC2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Zero Plus2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Prime
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Win/Win Plus
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Olimex A64-OLinuXino
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Tsvetan Usunov <usunov@olimex.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for FriendlyARM Nanopi NEO2 board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for FriendlyARM Nanopi A64
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for SoPine board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Pine64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: TL Lim <tllim@pine64.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for bananapi M64 board
with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add MacchiatoBin board by SolidRun. This board is based on Marvell
Armada 8040 SoC. Board support package includes the following
two options: mainline and vendor BSPs.
Mainline BSP:
- Marvell ATF v1.3-armada-17.10
- mainline U-Boot v2017.11
- mainline Linux kernel v4.14.4
Marvell BSP with more hardware support enabled:
- Marvell ATF v1.3-armada-17.10
- Marvell U-Boot based on v2017.03
- Marvell Linux kernel based v4.4.52
More details about this board are available on wiki:
- http://wiki.macchiatobin.net
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: misc tweaks in readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Run-time tested on ZedBoard, build-tested on the other boards]
[Peter: also add host-dosfstools / host-mtools to make vfat images]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are about to introduce genimage support for the Zynq boards. For
all of them U-Boot loads the DTB from a file named "devicetree.dtb" so
we need to rename it on the SD card image.
We could use genimage itself to rename files while creating the
image. But this would require a different genimage.cfg for each board,
leading to duplicate code.
Instead let's create a "devicetree.dtb" symlink pointing to the dtb
listed in the configuration. Currently all the Zynq-based boards have
only one DTS configured, but if one had two or more of them, the
symlink would point to the first one.
[Peter: only create symlink if dtb option is available]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ATF can be used in different ways:
- ATF encapsulates U-Boot as the BL33, which is what is done on ARM
Juno (currently supported in Buildroot) and Marvell platforms (soon
to be supported)
- U-Boot encapsulates ATF's BL31, which is what is done on Allwinner
ARM64 platforms.
Until now we were assumming the former was always the case, but
obviously it isn't. Therefore, this patch adds an option that allows
to explicitly tell ATF that it encapsulates U-Boot as its BL33.
We adapt the only defconfig that uses ATF so that it enables this
option as appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, our arm-trusted-firmware unconditionally builds a FIP
(Firmware Image Package). While this is often needed on platforms
where ATF encapsulates U-Boot, it is not the case on some other
platforms where it's U-Boot that encapsulates parts of ATF.
In order to prepare the support for the later platforms, we make
building the FIP image optional, and update the only defconfig we have
that uses ARM Trusted Firmware.
Note: we considered adding a "default y" here to preserve backward
compatibility, but there really isn't any default that is sane:
whether a FIP image needs to be built or not is purely platform
specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This board is quite similar to orangepi-one board. Instead of ethernet, it
has RTL8189FTV SDIO WiFi chip.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make WiFi work out of the box on orangepi-pc-plus:
- add rtl8xx firmware
- add rtl8189fs driver
- add mdev for module autoloading
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek
RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot
and kernel. So it makes sense to create a separate entry
for this board in buildroot.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to version 2017.11 and kernel to 4.14.3.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Or1k support improved, f.e. musl can be tested inside qemu.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump kernel to version 4.14 and U-Boot to 2017.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6ulevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As there is now a defconfig inside kernel sources for mxs platforms, use it.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This updates the LEGO MINDSTORMS EV3 board to Linux kernel 4.14 and
U-Boot 2017.11.
* Kernel patches are dropped because they are in mainline now.
* This caused the kernel image to be >3M so some adjustments to the image
sizes/layout needed to be made in U-Boot.
* Updated U-Boot version bumped since we are touching this config anyway
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6sx-sdb_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6slevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make WiFi work out of the box on orange-pi-zero:
- add xr819 firmware to image
- add mdev for module autoloading
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to 4.13.11 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.13 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This simplifies the pc configs and respective post image scripts to use
the shared genimage script and separate grub config files.
Separate grub files are cleaner to maintain and easier to copy and
modify, for example to support booting the pc defconfigs in qemu.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel version to 4.13.8.
Tested with qemu 2.9.1 on bios and UEFI virtual machines.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for bananapi M1 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel to version 4.13.5 and U-Boot to 2017.09.
While at it, remove the custom scripts for generating the SD card image
and use the standard scripts instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "virt" machine supports disk emulation, so use a ext4 rootfs instead of
initramfs for consistency with the other qemu defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mainline kernel is able to decode video via the coda driver.
Add support for it and also add some explanation on how VPU decoding
can be tested with Gstreamer.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce imx6-sabreauto_defconfig that uses mainline U-Boot and
mainline kernel.
As mainline U-Boot supports SPL, it is possible to boot the same
sdcard.img in the three mx6sabreauto variants: imx6q, imx6dl and imx6qp.
Also update the readme.txt file to explain how to build an image for
mx6sabreauto boards using mainline U-Boot and kernel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: regenerate gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To the latest commits on the odroidc2-3.14.y / odroidc2-v2015.01 branches.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Dagg <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch add support for Open Frame C.TOUCH 12 Kit.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch add support for Open Frame C.TOUCH 10.1 Kit.
Since the defconfig is no longer only for the starter kit, remove that
from BR2_TARGET_GENERIC_ISSUE.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add the new SAMA5D27 SOM1 Evaluation Kit with linux4sam_5.7 components.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump at91sam9x5ek, atmel_sama5d2_xplained, atmel_sama5d3_xplained and
atmel_sama5d4_xplained all variants to linux4sam_5.7. The 3 foundation
components have their tags changed (AT91Bootstrap, U-Boot, Linux kernel).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 and kernel to 4.13.3 versions.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel version to 4.13.3.
Kernel 4.13.3 uses the /dev/dri/card0 device as rendering node, so
adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.09 uses SPL, so bump to this version so that we can
have a single qt5 image that supports the different imx6 sabresd
boards: imx6q, imx6dl and imx6qp.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The QT5 rootfs requires more space, so adjust it a larger size.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that SPL is supported a single image can run on the different
variants of imx6 sabresd boards: imx6q, imx6dl and imx6qp.
So drop the 'quad' prefix from defconfig, directory and readme file
to make it generic.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to 2017.09 version and kernel to 4.13.3.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.
The default architecture is set to Power8 as this was the first fully
enabled LE machine.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.07 has switched to SPL boot, which allows the same binary to
boot on imx6dl, imx6q and imx6qp sabresd boards.
Switch to the SPL mechanism.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: board is from Sinovoip, not Lemaker, move board files,
Use kernel headers from kernel, explicitly use 4.13.3,
drop eth0 dhcp config, cleanup post-build args,
disable tar output format, use u-boot custom format,
add host-dosfstools/mtools for genimage, drop unused
host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 version and kernel to 4.13.3.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 and kernel to 4.12.12 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to 4.13 kernel and remove all the dts patches as they
are part of upstream now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
minnowboard_max-graphical_defconfig has the line "BR_TARGET_GRUB2=y",
but this currently has no effect because BR_TARGET_GRUB2 cannot be
selected without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by
default.
The minnowboard max defconfig was updated to fix this problem, but the
graphical variant was not updated alongside it.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The galileo_defconfig has the line "BR_TARGET_GRUB2=y", but this
currently has no effect because BR_TARGET_GRUB2 cannot be selected
without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by default.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kernel used so far for the galileo boards would not successfully
build with GCC versions greater than 5.
See: https://github.com/mdr78/Linux-x1000/pull/2
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ts4900 defconfig is upstream in Linux since v4.9:
a2f1145 ARM: dts: TS-4900: add basic device tree
Bump kernel version to v4.12 and use the upstreamed defconfig
imx_v6_v7.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The TS-7680 is an i.MX286 ARM ARM926EJ-S board with 10/100 Ethernet,
USB port, eMMC and CAN ports.
The TS-7680 uses a 3.14.28 Linux kernel provided by Technologic Systems:
https://github.com/embeddedarm/linux-3.14.28-imx28
U-Boot is not provided as the manufacturer recommends not to update the
built-in bootloader.
For more informations please see:
https://wiki.embeddedarm.com/wiki/TS-7680
Signed-off-by: Julien Grossholtz <julien.grossholtz@savoirfairelinux.com>
[Thomas: use same headers as the kernel being built, update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need to select BR2_TOOLCHAIN_BUILDROOT_GLIBC, so just remove it.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
i.MX1/L boards require an old Linux kernel version to run, which is not
compatible with latest Buildroot needs.
Will fix:
https://gitlab.com/buildroot.org/buildroot/-/jobs/27873568
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: update .gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Toradex V2.7 SDK, U-Boot image has changed from u-boot.imx to
SPL + u-boot.img.
Also fix U-Boot build error with GCC6.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx7d-pico, which is a board based on NXP
i.MX7D processor.
For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc
Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
[Thomas:
- add upstream references for the Linux kernel patches
- fix typoes in readme.txt
- remove audio-related packages in defconfig
- regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unbreak failing defconfig.
Resulting kernel and rootfs booted on ci20 device.
While at it, drop the useless BR2_TARGET_UBOOT_VERSION variable, this
variable is a hidden variable, so it is useless to mention it in a
defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: drop BR2_TARGET_UBOOT_VERSION.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Probably not noticed before because dtc was already built or it was
installed on the host.
Fixes: https://gitlab.com/arnout/buildroot/-/jobs/28979369
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linux 4.1 kernel does not compile with gcc 6.x.
The compiler version is now fixed to 5.x until a new kernel is used.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 5ffafd2353 (grub2: bump up version), grub2 needs a
toolchain with WCHAR support. However, the defconfigs that use grub2
were not updated at the time.
Add BR2_TOOLCHAIN_BUILDROOT_WCHAR=y to minnowboard_max_defconfig.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Vincent Stehlé <vincent.stehle@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes '__multi3' issue when building the kernel.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.
This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.
Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
- Add Fabio to DEVELOPERS
- Rename linux config fragment to linux_qt5.fragment
- Add comment to linux_qt5.fragment why it is needed
- Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
- Reorder defconfig entries to they match imx6q-sabresd_defconfig
- Remove strace and host-uboot-tools, neither seems to be needed
- Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
- Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
- Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to 2017.07 and kernel to version 4.12.3.
As imx_v6_v7_defconfig in 4.12 selects CONFIG_CFG80211_WEXT=y,
remove the linux.fragment file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Rebase on top of mainline 2017.03 release
- Fix sparse image flashing issues
Here are the main Linux modifications:
- Add mma8451 driver support
- Fix possible TiWi spurious interrupts issue
- Fix Ethernet interrupt parent issue
- Add USB Type C TUSB320 controller support
- Add SOM2 i.MX6DL and i.MX6QP variants
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note, that since version 2017.07 the sunxi targets needs the Python
libfdt library on the host. Therefore, additionally select the U-Boot
config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop the version number from the linux configuration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have wordexp support in uClibc-ng and nodm is available, we can
use it for the graphical defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux kernel version to 4.12.1 and U-Boot to 2017.05.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the board specific patches which has been applied upstream.
[Peter: also drop now unused BR2_GLOBAL_PATCH_DIR]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Main difference is that the drm driver now supports the hdmi output.
The gxl variant device tree has been renamed in:
commit 7eea67101b9713ae438955e8899b3c4b078419f9
Author: Kevin Hilman <khilman@baylibre.com>
Date: Fri Jan 20 07:57:52 2017 -0800
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
Since the GXL family has S905X and S905D SoCs, we're keeping the SoC
name in the DTS filename for clarity. Rename this file accordingly to
be consistent with the rest of the GXL DTS files.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
So adjust the defconfig and boot script to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rather than bundle the overlay with us, directly fetch it from its
upstream location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently, specifying a custom Xtrensa core is done with two variables:
- the core name
- the directory containing the overlay tarball
However, the core name only serves to construct the tarball name, and is
not used whatsoever to configure any of the toolchain components
(binutils, gcc or gdb), except through the files that are overlayed in
their respective source trees.
This has two main drawbacks:
- the overlay file must be named after the core,
- the tarball can not be compressed.
Furthermore, it also makes it extremely complex to implement a download
of that tarball.
So, those two variables can be squeezed into a single variable, that is
the complete path of the overlay tarball.
Update the qemu-xtensa defconfig accordingly.
Note: we do not add a legacy entry for BR2_XTENSA_CORE_NAME, since it
was previously a blind option in the last release, and there's been no
release since we removed BR2_XTENSA_CUSTOM_NAME. So, we just update the
legacy comments for BR2_XTENSA_CUSTOM_NAME, since that's all the user
could have seen in any of our releases so far.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not needed to have an intermediate blind option, we can just
hide the prompt behind the same dependency as the non-blind symbol.
Update our qemu-xtensa defconfig acordingly (note: it was using
different values for both options, which is not possible; the blind
option was just set to the non-blind one in the .config).
Also remove an unneeded empty default for the BR2_XTENSA_OVERLAY_DIR
string option (strings are empty by default).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change deprecates the ext2/3/4 rootfs size in blocks symbol in
favor of one that mimic the fs-size argument behavior of mkfs (i.e.
size in a human readable format accepting k, m, g or t suffix or their
upper-case variants).
This change also updates the defconfigs that used to set
BR2_TARGET_ROOTFS_EXT2_BLOCKS symbol.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of the Atmel defconfigs to linux4sam_5.6 in commit
0f7b5d4a9f, the new U-Boot version uses
the Device Tree compiler, so we need to add BR2_TARGET_UBOOT_NEEDS_DTC
in order to build dtc before u-boot and avoid build failures.
Fixes:
>>> uboot linux4sam_5.6 Configuring
>>> uboot linux4sam_5.6 Building
[...]
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chakra Divi <chakra@openedev.com>
[Thomas: remove host-uboot-tools from defconfig, already pulled by
BR2_TARGET_UBOOT_BOOT_SCRIPT, remove trailing whitespace.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
_mmc on defconfig files in engicam need to drop and same follow on
other engicam defconfig files.
So, this patch rename engicam_imx6ul_isiot_mmc_defconfig to
engicam_imx6ul_isiot_defconfig which is missing in commit "board: Add
support for Engicam Is.IoT MX6UL SOM" (sha1:
0235bc6176)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam Is.IoT MX6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools/host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create board/engicam/icorem6 for i.CoreM6 supported files.
and update the readme.txt so-that it can list i.CoreM6 board
details.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS
board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A VFAT filesystem is described in the genimage configuration file, so
we need host-dosfstools and host-mtools enabled in the defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 DualLite/Solo board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6
variant boards, so this patch update the same along with
buildroot defconfig that reflect the common name.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of a custom post-build script, use the boot script generation
logic of the U-Boot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for a13_olinuxino board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- use full name in DEVELOPERS file
- remove parametrization of the post-build.sh script, just hardcode
the boot.cmd file used as input
- add missing dosfstools and mtools host packages in defconfig,
needed because a vfat partition is defined in the genimage.cfg
file
- minor tweaks to readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default bootargs have changed in U-Boot for this board. Build U-Boot
environment and add it to the SD card image to update bootargs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As the vendor folder friendlyarm is created, move board nanopi-neo
also under vendor folder.
Signed-off-by: Chakra Divi <chakra@openedev.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync
include/linux/compiler*.h with Linux 4.5-rc6) which was added during the
2016.03 cycle.
Fix the build by bumping u-boot to 2017.05.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The board has an ethernet interface, so enable DHCP for it.
The used flash chip uses 16K erase blocks, so use that for JFFS2:
mtdinfo -a
..
mtd5
Name: user
Type: nand
Eraseblock size: 16384 bytes, 16.0 KiB
Amount of eraseblocks: 1915 (31375360 bytes, 29.9 MiB)
Minimum input/output unit size: 512 bytes
Sub-page size: 256 bytes
OOB size: 16 bytes
Character device major/minor: 90:10
Bad blocks are allowed: true
Device is writable: true
While we're at it, add a readme explaining how to build and upload the build
to the board.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig, as the kernel doesn't contain commit cb984d101b (compiler-gcc:
integrate the various compiler-gcc[345].h files) which was added during the
4.2 cycle.
Fix the build by bumping the kernel to 4.11.5.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Zynq ZC706 defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq MicroZed defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZedBoard defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
