This patch reworks the chapter 'Configuration of other components' as
follows:
- remove separate customize-xxx-config.txt files in favor of one shared file
configure-other-componenents.txt
- use labeled list instead of separate sections, as the information in each
section is limited.
- simplify instructions for busybox/uclibc thanks to the kconfig-package
infrastructure
- rewrite instructions for Linux
- add instructions for Barebox
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the tip on searching in the configuration editors into the
section 'Buildroot configuration', which is more logical.
The wording of that section is slightly adapted to fit this new part.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch performs some additional restructuring of the manual,
specifically in the User Guide. In detail:
- Rename 'Daily use' to 'General Buildroot usage'
- Move chapters 'make tips', 'Eclipse integration', and 'Advanced usage' as
sections under the 'General Buildroot usage' chapter.
- Rename 'Details on Buildroot configuration' into 'Buildroot configuration'
- Rework the 'Customization' section as follows:
- Move the short section on debugging the external toolchain wrapper into
the rest of the explanation on external toolchains.
- Remove the now redundant section on toolchains, as this is already
explained in much more detail in the 'Buildroot configuration' chapter.
- Move the sections on busybox/uclibc/kernel configuration from chapter
'Customization' into a separate chapter 'Configuration of other
components'.
- Rename the remaining part of the original 'Customization' chapter into
'Project-specific customization' and fold it together with the next
chapter 'Storing the configuration'
- Remove the chapter 'Going further in Buildroot innards' thanks to:
- Moving the chapter 'How Buildroot works' to the Developer guide.
- Moving the 'Advanced Buildroot usage' section to the 'General Buildroot
usage' chapter.
- Remove the chapter 'Hacking Buildroot' by:
- Adding a reference to adding packages to the 'Project-specific
customizations' chapter
- Leaving out the explicit reference to creating board support, as this is
part of the previous chapter already, so an extra reference is
redundant.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For asciidoc, a string like '+these are some words+' will be displayed in
monospace font. Such sequences are identified by searching for a matching
pair of + signs in the same block.
The string 'C++' also contains such + signs. In most cases, this does not
pose a problem and no escaping is necessary. However, if 'C++' occurs twice
in the same block, the + signs will be matched to each other, and asciidoc
formats all text between them as monospaced text. In this case, escaping of
one of these 'C++' occurances is necessary to get the right formatting.
In one place of the manual, there is a sentence that causes such a problem:
"you only have to tell whether your toolchain supports C++ or not and
whether it has built-in RPC support. If your external toolchain uses
the 'uClibc' library, then you have to tell Buildroot if it supports
largefile, IPv6, RPC, wide-char, locale, program invocation, threads
and C++."
Commit 082dec8ce4 was based on a patch fixing
this problem in one place of the manual, but was incorrectly changed while
committing.
This patch reverts the incorrect changes in that commit, and solves the
problem correctly.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asciidoc supports two syntaxes for section titles: two-line titles (title
plus underline consisting of a particular symbol), and one-line titles
(title prefixed with a specific number of = signs).
The two-line title underlines are:
Level 0 (top level): ======================
Level 1: ----------------------
Level 2: ~~~~~~~~~~~~~~~~~~~~~~
Level 3: ^^^^^^^^^^^^^^^^^^^^^^
Level 4 (bottom level): ++++++++++++++++++++++
and the one-line title prefixes:
= Document Title (level 0) =
== Section title (level 1) ==
=== Section title (level 2) ===
==== Section title (level 3) ====
===== Section title (level 4) =====
The buildroot manual is currenly using the two-line titles, but this has
multiple disadvantages:
- asciidoc also uses some of the underline symbols for other purposes (like
preformatted code, example blocks, ...), which makes it difficult to do
mass replacements, such as a planned follow-up patch that needs to move
all sections one level down.
- it is difficult to remember which level a given underline symbol (=-~^+)
corresponds to, while counting = signs is easy.
This patch changes all two-level titles to one-level titles in the manual.
The bulk of the change was done with the following Python script, except for
the level 1 titles (-----) as these underlines are also used for literal
code blocks.
This patch only changes the titles, no other changes. In
adding-packages-directory.txt, I did add missing newlines between some
titles and their content.
----------------------------------------------------------------------------
#!/usr/bin/env python
import sys
import mmap
import re
for input in sys.argv[1:]:
f = open(input, 'r+')
f.flush()
s = mmap.mmap(f.fileno(), 0)
# Level 0 (top level): ====================== =
# Level 1: ---------------------- ==
# Level 2: ~~~~~~~~~~~~~~~~~~~~~~ ===
# Level 3: ^^^^^^^^^^^^^^^^^^^^^^ ====
# Level 4 (bottom level): ++++++++++++++++++++++ =====
def replace_title(s, symbol, replacement):
pattern = re.compile(r'(.+\n)\%s{2,}\n' % symbol, re.MULTILINE)
return pattern.sub(r'%s \1' % replacement, s)
new = s
new = replace_title(new, '=', '=')
new = replace_title(new, '+', '=====')
new = replace_title(new, '^', '====')
new = replace_title(new, '~', '===')
#new = replace_title(new, '-', '==')
s.seek(0)
s.write(new)
s.resize(s.tell())
s.close()
f.close()
----------------------------------------------------------------------------
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: fix to actually use the correct syntax.]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ELDK now relies on Yocto, so it no longer has the funky
non-standard way of doing multilib. Also, we didn't mention that Yocto
toolchains/SDK are not suitable for usage with Buildroot. Therefore,
this commit rewords this part of the documentation to explain that
Yocto/OpenEmbedded SDKs cannot be used as external toolchains in
Buildroot, and why.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace ADI by Analog Devices, which is clearer for most people, and
remove the Xilinx external toolchains since we have deprecated them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have eglibc and glibc support in the internal backend, and
no longer marked as experimental, a little bit of rewording is
needed. It is no longer necessary to indicate that uClibc was
historically supported as the only C library, and that the glibc
support is experimental. We also update the rest of the description to
be less uClibc specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the /dev management section in the manual with information
about eudev, which replaces udev.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: remove a few more ctng references in customize-store.txt]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds a new section
Working with Buildroot
-> Details in configuration
-> Cross-compilation toolchain
that gives a lot of details about our three toolchain backends. It
takes some elements that were previously later in the manual in
"Embedded basics" and in "External toolchain" and combines them with
more details about internal backend and Crosstool-NG backend.
The "Embedded basics" section becomes empty and is therefore
removed. A few elements have been lost in the process, but they were
considered to not be really useful, especially located so far in the
manual.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed with Samuel Martin, there are a few questions about some
Buildroot configuration aspects that come very often on the IRC
channel and on the mailing-list. Topics such as the /dev management
and init systems are often raised.
Therefore, this patch adds a new section that provides details about
the Buildroot configuration possibilities. It does not aim at
replacing the help text of each configuration option, but rather to
complement them by providing more background. Having those
informations in the manual will also make it easier for us to point
newcomers to the right place in the documentation when they have
questions.
Note that this section will replace the "Embedded basics" section that
comes way too late in the manual. This is done in a followup commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
