The Acqua A5 is a system on module based on the Microchip SAMA5D31 SoC:
https://www.acmesystems.it/acqua
It is available in both 256 MiB and 512 MiB versions, hence the two
defconfig files. These configs build microSD card images with:
- AT91Bootstrap 3
- Linux 5.4.107
- default buildroot packages (uClibc, Busybox)
The device tree blob comes from Acme Systems:
https://github.com/AcmeSystems/dts-archive
It is licensed under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 5502a889dd
("configs/beaglebone_qt5: don't use custom post-image script") removed the use
of genimage_linux41.cfg but didn't remove the file.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Almost identical as i.MX 8M Nano, with a couple of differences:
- different ATF load address [1]
- different entry point [2]
[1] e8e2703a30
[2] https://source.denx.de/u-boot/u-boot/-/blob/v2021.04-rc4/configs/imx8mp_evk_defconfig#L14
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump TF-A to version 2.4.
- Bump u-boot to version 2021.01.
- Bump kernel to version 5.11.3.
We switch TF-A to a single FIP image. Thanks to this, TF-A does not need to
use semihosting to load the various BL* anymore (but U-Boot still does).
Update the readme.txt accordingly.
We switch to a u-boot image for the ramdisk. This removes the need to
update the fdt chosen node manually in the bootcmd.
While at it, we drop the generation of the kernel dtb, which we do not use.
In this config, we are indeed using the dtb generated on-the-fly by qemu
and amended by TF-A.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds a 32-bit equivalent configuration of ppc64-e5500 board.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have defconfigs for quite a few friendlyarm boards, but the
naming for the defconfigs for those boards is inconsistent: some
start with 'friendlyarm_' while others don't.
Although the number of boards starting with 'friendlyarm_' is
less than those which do not, we still choose to rename the
boards so all have the 'friendlyarm_' prefix.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Chakra Divi <chakra@openedev.com>
Cc: Davide Viti <zinosat@gmail.com>
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Very similar to the other stm32mp157-based boards, except that we use the
multi_v7 defconfig for ease of maintenance.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so get rid of
the hardcoded root=/dev/mmcblk1p2. The old vendor U-Boot unfortunately does
not have GPT support, so stick to MBR and use the legacy
root=PARTUUID=<disksignature>-<partition> format and set a fixed disk
signature, similar to how it was done for orangepi-r1 in commit 34cce93adb
(configs/orangepi_r1_defconfig: bump kernel to 5.10.10, u-boot to 2020.10).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 38d04e6b13, I did a last-minute change by adding the comment
to explain where the PARTLABEL was coming from, and introduced a typo in
that comment.
Fix it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Patch that pins mmc indexes was not accepted to mainline kernel. Drop that
patch and switch to GPT to use partition labels. For GPT the name of the
partition in genimage.cfg is used as the label for that partition. Note
that the default GPT partition table location conflicts with the SPL
location, so move GPT table after bootloaders.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to use the official linux kernel v5.10 instead of an
out-of-tree kernel, and use the official U-Boot v2021.01 as the
bootloader. Provide two configuration files of genimage for different
boot flows:
- Boot from SD card (default)
- Boot from SPI flash
A boot script is generated to automatically boot the distro.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
So the normal DHCP-on-eth0 logic works for the graphical defconfig where
eudev is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explicitly enable PCI support in the kernel after commit eb01d42a77785 (PCI:
consolidate PCI config entry in drivers/pci) and change to GPT partitions /
root=PARTLABEL to find the rootfs instead of hardcoding /dev/mmcblk2p2 as
the mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4).
This has the additional advantage that the same image will work when written
to a USB drive instead of a microsd.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc
driver has been switched to asynchronous probe. As a result, mmc indexes
can be shuffled breaking board boot. Add patch that pins mmc indexes to
their original ordered values.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for Sinovoip's Banana Pi
M1+. It is mostly based on bananapro_defconfig
but with appropriate device tree and minor tweaks:
- apply bananapi-m1-plus device tree in linux
- apply bananapi_m1_plus defconfig for uboot
- apply patch for OOB IRQs on new device tree
- update device tree name in boot.cmd, genimage.cfg
- update symlink for BRCM driver in rootfs_overlay
- overall clean-up of the config
Tested on BPI-M1+ V1_1.
Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GPT provides partition labels, which can be used to tell the kernel to find
the rootfs based on it (root=PARTLABEL=rootfs) as a nicer/more extensible
solution than the MBR disk signature / PARTUUID.
When using GPT, the name of the partition in genimage.cfg is used as the
label for that partition.
The default GPT partition table location unfortunately conflicts with the
SPL location, so move the 16KB GPT table after it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: add the comment about 'rootfs']
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The probing order of the two mmc controllers (sdcard and sdio wifi) has
changed in kernel 5.10 since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4), so change to
root=PARTUUID=.. instead of hardcoding /dev/mmcblkXp2.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: use feedc0de as magic]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
HDMI support is enabled by default in sunxi_defconfig since commit
c822a3ec17 (ARM: configs: sunxi: Add DRM output-related options), so drop
from fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for this board was removed in Linux upstream [1] since Xilinx
new design tools dropped these platforms in 2013, along with all
PPC405/PPC440 new designs. They are not maintained nor tested anymore.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7ade8495dcfd788a76e6877c9ea86f5207369ea4
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump most QEMU defconfigs (every one that was previously on 5.4.y)
to latest longterm kernel 5.10.7.
Please note the following exceptions/modifications:
- board/qemu/qemu_s390x_defconfig: ignored (already up to date)
- board/qemu/sh4*-r2d:
- Remove the remaining kernel patch [1] provided by Alan Modra
fixing rodata alignment, carried here by Romain Naour [2] to
fix an issue preventing kernel from booting with binutils 2.23.
Patch is present in upstream Linux now.
- Fix compile-time error regarding 64-bit time data structures
from kernel headers when building with uclibc. Previous fix [3]
existed upstream; but see details below.
- board/qemu/ppc-mpc8544ds: Updated kernel patch
- board/qemu/arm-versatile: Updated kernel patch
- board/qemu/mips*r6*: Updated kernel patch
Tested on all configs/qemu* configurations. [4]
[1] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html
[2] https://git.busybox.net/buildroot/commit/?id=a2331c8a61bdd71c47492efc818fb0458a349219
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fc94cf2092c7c1267fa2deb8388d624f50eba808
[4] https://gitlab.com/clumsyape/buildroot/-/pipelines/244024195
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Integrate the RCW into the storage device image, so the image can also
be used a boot source. The SoC expects the RCW at offset 4096 of the SD
card or eMMC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable building of the bootloader and integrate it into the resulting
image.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump QEMU defconfigs to latest longterm kernel 5.4.88.
Please note that QEMU boards not based on 5.4.y were ignored:
- qemu_csky810_virt_defconfig
- qemu_csky807_virt_defconfig
- qemu_csky610_virt_defconfig
- qemu_csky860_virt_defconfig
Tests were carried out on all QEMU boards using Gitlab [1] (commit
message was slightly different, but the patch is identical)
Additional actions needed were:
- board/qemu/sh4-r2d: Remove one of the two kernel patches [2] provided
by Alan Modra fixing rodata alignment, carried here by Romain Naour [3]
to fix an issue preventing kernel from booting with binutils 2.23.
Patch is present in upstream Linux now.
[1] https://gitlab.com/clumsyape/buildroot/-/pipelines/239483891
[2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html
[3] https://git.busybox.net/buildroot/commit/?id=a2331c8a61bdd71c47492efc818fb0458a349219
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the new SAM9X60 Evaluation Kit with linux4sam_2020.04
components. Update README file with new defconfigs.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Re-introduced rock64_defconfig which was dropped by commit
a5fa2469e6 ('Revert
"configs/rock64_defconfig: remove defconfig"').
Signed-off-by: Min Xu <xuminready@gmail.com>
Tested-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It may be useful for users using Boundary Devices boards to find
more advanced defconfigs that the one provided by Buildroot.
See:
https://github.com/boundarydevices/buildroot-external-boundary#configurations-details
Update the readme.txt to add the link to the br2_external maintained
by Boundary Devices.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove the note about non-working network. This was actually fixed with
linux kernel 5.9. This board is now on 5.10.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
weston does not work on the ti-sgx SDK, so switch to using KMS directly,
and drop the wayland-related config options.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When tags was added by commit 011206b2bf
to detect the qemu command line, the qemu_arm_vexpress_tz_defconfig
was ignored due to a build issue.
This build issue has been fixed by previous patches, so we can
enable the runtime testing by adding the tag in the readme.txt
and the post-image script in the defconfig.
Since Qemu from HOST_DIR is now executed directly from BINARIES_DIR,
we can remove all the string before "qemu-system-*".
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Usually the qemu command line start directly with "qemu-system-<arch> ...".
But the command line for qemu_arm_vexpress_tz_defconfig start by doing
"cd output/images && ../host/bin/qemu-system-arm". This is necessary
since boot binaries, except BL1, are primarily loaded via semi-hosting
so all binaries has to reside in the same directory as QEMU is started
from [1].
To order to handle this case correctly, update the post-image.sh used
by all qemu defconfigs to execute qemu from BINARIES_DIR.
Since we have to change the current directory use a subshell to
restore the current directory after Qemu execution.
[1] 4ebbea9592/docs/plat/qemu.rst
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The output/images directory is called BINARIES_DIR in the
Buildroot manual, not IMAGE_DIR.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump to the latest kernel v5.9.11 and require openssl.
- Switch to PSCI for bringing up the secondary CPUs.
- Switch to GICv3.
- Update the instruction in the readme.txt to use the latest FVP v8
Foundation Platform 11.12 build 38, and to start 4 cores in SMP.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildroot
This patch is based on Orangepi Zero Plus2 board support, so genimage
configuration and description is copy pasted. One difference is that
newer Linux and U-Boot are selected. Another difference is Ethernet
support (Plus) instead of WiFi (Plus2).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For grub-efi we can align the rootfs to start at exactly 16MB from the
beginning of the disk. This can be done by reducing the vfat partition to
be 32 KB smaller than its 16MB size, just like the offset of the vfat
partition.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
[Peter: drop redundant offset/size settings, add comment]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As resizing the rootfs partition using a partition manager can result
in a non booting image due to the firmware's location, removal of the
size limit for the rootfs allows better match size-wise.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot 2020.10 no longer provides boot command in default environment for
Udoo Quad/Dual board. Boot script needs to be added to the image. In order
to keep using common infrastructure for freescale boards, move boot files
to root filesystem and add boot script there. Also switch Udoo Neo board
to common freescale infrastructure to simplify maintenance.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After BSP update Udoo Quad/Dual board once again hangs on boot. On a
new kernel disabling CONFIG_USB option is not enough to work around
the troublesome usb host on Udoo Quad/Dual board. So in order to be
future-proof it makes sense to disable usbh1 block in device tree
rather than fine-tune kernel configuration after BSP updates.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit changes the stm32mp1 configurations to use the TF-A ->
U-Boot boot flow (called "trusted boot flow" by ST) instead of the
U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and
it's also the only one that allows to use the STM32 Cube Programmer
for reflashing devices.
As part of this, the genimage configuration file is now generated, as
it contains some file names that depend on the platform. Removing
partition-type from genimage.cfg is mandatory, since it would cause a
hybrid MBR partition table to be created, which itself would prevent
ATF from finding the ssbl parition.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with linux kernel v5.9 all required configuration options are
available in the default config.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 2020.04 version, the enumeration of MMC has changed, so the boot
script must be updated
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the chromebook elm configuration to use v5.9 instead of an
intermediate release candidate.
At the latter stages of the v5.9 release, a patch was added which
broke the Chromebook Elm HDMI. Therefore add a revert patch to get rid
of this problem. The fix (and the revert) are already on the mailing
list (https://lkml.org/lkml/2020/10/10/32) and should become available
with v5.10
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 52f188140c (qemu version bump to 5.1),
the image generated by qemu_riscv64_virt_defconfig doesn't boot anyore with
the following error:
rom: requested regions overlap (rom phdr #0: [...]/images//fw_jump.elf. free=0x000000008000e240, addr=0x0000000080000000)
qemu-system-riscv64: rom check and register reset failed
Update the qemu command line as described in the Qemu wiki for riscv64 [1]
Fixes:
https://gitlab.com/jugurthaB/buildroot/-/jobs/686104707
[1] https://wiki.qemu.org/Documentation/Platforms/RISCV#Booting_64-bit_OpenEmbedded_Images
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[yann.morin.1998@free.fr:
- don't force network range
- don't forward TCP port
- drop post-build script to add tty1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds supports for building buildroot kernel + rootfs
for MT8173 Elm board, also known as Chromebook Elm
(https://www.acer.com/ac/en/US/content/series/acerchromebookr13).
Though Chrome-OS is officially supproted on this board, the
mainline kernel works as well (benchmarks + conformance), and so
the 5.9 kernel is used. As the 5.9 kernel isn't yet released, we
use the 5.9-rc5 for now, which will be up-revd to 5.9 once its
released.
Using the mainline kernel means that we have to apply certain patches
to get the HDMI screen working. These patches are lying in the
"drm-misc-next" list and will make it to the kernel after 5.9. At that
time, we will remove the patches and point Buildroot to use the latest
kernel (hopefully, 5.10).
This commit also adds an ITS file (for creating FIT images), an ARGS
file (for providing kernel args) and a "sign.sh" script to generate
signed kernel images. Though the "sign.sh" is very similar to the
coresponding file under board/chromebook/snow, it cannot be shared
between both boards, as the script requires access to the board
specific its / args file.
Additionally a readme & defconfig is added to help the user get started.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
