The DEVELOPERS entry was missing.
Fixes: 35eb74c634 ("configs/am574x_idk_defconfig: new defconfig")
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As advised by Thomas Petazzoni in [1], drop tinymembench which is
abandonned (last commit in 2017). Moreover, it raises the following
build failure in Thumb mode:
/tmp/ccaZHrla.s:40: Error: instruction not supported in Thumb16 mode -- `subs r1,r1,#16'
/tmp/ccaZHrla.s:43: Error: instruction not supported in Thumb16 mode -- `subs r1,r1,#16'
main.c:45: Error: selected processor does not support `mla r2,r10,r2,r5' in Thumb mode
main.c:46: Error: unshifted register required -- `and r8,r7,r2,lsr#16'
main.c:47: Error: selected processor does not support `mla r2,r10,r2,r5' in Thumb mode
main.c:48: Error: unshifted register required -- `and r9,r6,r2,lsr#8'
main.c:49: Error: selected processor does not support `mla r2,r10,r2,r5' in Thumb mode
[1]: https://patchwork.ozlabs.org/project/buildroot/patch/20240114135446.1156025-1-fontaine.fabrice@gmail.com/
Fixes:
- http://autobuild.buildroot.org/results/1e359c294a8d71fb1833e5d04a6bc7d4fd533510
- http://autobuild.buildroot.org/results/c06010d7a2bdb33a1707266133a3880e14be7657
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
phobosdpl is an old work email I don't really use anymore, so I'm
changing it to my personal email.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the AVNET RZBoard V2L.
The board support creates a bootable sd card image. The board is
shipped with a u-boot inside its eMMC. The board support uses this
u-boot and does not build and deploy a u-boot onto the sd card.
Instead the sd card only contains a uEnv.txt, a kernel image and the
rootfs.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Born as a project to read/write the bootcount on the TI am3xx platform,
over time it has introduced bootcount management on EEPROM and for the
stm32mp1 platform. As a result, the project removed the 'davinci' tag
from its name and GitHub link.
The patch aligns the package name in Buildroot with the current one on
GitHub.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Peter: extend/rework legacy handling]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
[Peter: Fix check-package warnings, move to "Shell and utilities" and add
DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current package has not recieved an update since Sat Oct 9 2021
33ece2446e and is not python 3.12 compatible.
Furthermore, the current version requires at least 42 new packages worth of
depedencies of which several require patches to be python 3.12 compatible.
As nobody has stepped up to maintain the package and its ever-growing list of
dependencies, along with the other problems, it is time to drop the package.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-pygame package has not recieved any update since
Sun May 1 22:15:17 2016 (commit: a9ec96e545)
Also, this package no longer builds properly against python 3.12.0. Receiving
the following error when building:
```
src/surface.c:2812:14: error: invalid type argument of unary ‘*’ (have
‘int’)
2812 | ch = *PyUnicode_AS_UNICODE (obj);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
src/surface.c: In function ‘PySurface_Blit’:
```
If someone wants to re-introduce this package at a later date they are more
than welcome to do so!
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building newlib for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building gcc for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building binutils for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
In order to build the zynqmp pmufw and versal plm applications without error,
binutils version 2.41 or higher is required.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new virtual package for adding a bare-metal
toolchain to Buildroot. For now, it depends on nothing, so it will not
actually build anything, but it defines some options that will be
needed by the various packages that will be part of this toolchain
build process.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The buildroot manual says this kind of commit should be done together
with the actual changes made to a config/board. But since a number of
changes will follow for some boards and configs, it seemed more
logical to make a separate commit for this.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a runtime test for fastapi. Use uvicorn as the asgi server
application as does the fastapi hello world example [1].
Fastapi depends on PydanticV2 now which is written in rust so we need to
run the test on armv7.
[1] https://fastapi.tiangolo.com/tutorial/first-steps/
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[Arnout:
- fix flake8 errors
support/testing/tests/package/sample_python_fastapi.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_fastapi.py:8:1: W391 blank line at end of file
- Remove BR2_CCACHE (as requested by Marcus).
- Add a comment explaining that this also tests uvicorn and pydantic.
- Re-try wget in a loop instead of a fixed timeout of 30 seconds.
- Add a DEVELOPERS entry.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
JSON Web Tokens are an open, industry standard RFC 7519
method for representing claims securely between two parties.
This Library is used by Asterisk 20.6.0 and newer.
We need to use autotools to install pkgconfig file.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Peter: drop _SOURCE, add host-pkgconf, add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, micropython-lib was a package that installed v1.9.3, which is
more than 6 years old. This was acceptable since micropython never made
any other official release of the library until v1.20.
Meanwhile, the libraries underwent a reorganization, and they are now
available in a directory structure that cannot be copied directly into
the target. This might explain why v1.9.3 is still present in the
current day buildroot (which comes with micropython v1.22).
As part of the changes made by the micropython project, the libraries
are now released together with the interpreter. They are cloned as a
submodule into the lib/micropython-lib directory, and are present in the
release tarball.
This commit introduces an auxiliary script to collect those libraries
and reorder them into a structure that can then be copied into
/usr/lib/micropython. The script utilizes a module from the tools
directory of the micropython repo.
The helper script is kept as simple as possible, and makes use of
existing micropython tools (used to process manifests) to discover the
list of packages available in micropython-lib. The hope is that by
relying on them, any future changes in directory structure will be
covered by the official "manifestfile.py" tool.
It is to be noted that, even though the manifestfile.py script/module is
part of the micropython package, it is actually written for CPython, and
is not expected to even work when using micropython as an interpreter.
This we do not need to introduce host-micropython to use that tool, and
microython already depends on host-python3 for other parts of the build.
With this commit, micropython-lib is installed (optionally) as part
of micropython, and thus a separate package is no longer needed. The
original config variable name was retained as it fits with the
micropython package "namespace", and thus this is backward compatible
and no legacy handling is needed.
This commit also ensures that the libraries in micropython-lib will
be updated together with newer versions of micropython in the future.
Signed-off-by: Abilio Marques <abiliojr@gmail.com>
[yann.morin.1998@free.fr:
- use if-block in Config.in
- simplify PYTHONPATH
- fix check-package
- reword and reorder parts of the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
