As ARC support is not yet in all upstream packages, a different location is
required to download the packages from. This adds an option to specify a
site for ARC-specific versions of packages such as binutils, gcc.
When ARC support has been upstreamed for all packages, this option can be
removed again.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs that
can be used from deeply embedded to high performance host applications.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Add Faraday FA526/626 as suggested on bug #1291
Note however that these cores are v4 and NOT v4t.
* Make the sa110 & sa1110 cores -> strongarm since they're the same.
* Drop all of the ARM variants lower than v4 including generic, there's
no point in supporting obsolete targets.
* Fix uClibc USE_BX logic, it was always on, this would break the new
FA526/626 support and broke StrongARM since it's a v4 core.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Kconfig does not accepts that a symbol that is part of a choice
be affected a default value.
Fix this by introducing a dummy EABI symbol, and make the real
EABI symbol a prompt-less option that depends on !OABI.
[Peter: drop arm dependency, rename to EABI_CHOICE]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_ARM_EABI config symbol is still kept in order to minimize
the impact.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
According to the ARM1136JF-S and ARM1136J-S Revision r1p5 Technical Reference
Manual, from release rev1 (r1pn), the ARM1136JF-S processor implements the ARMv6
instruction set with the ARMv6k additions.
This patch differentiates the ARM1136JF-S revisions 0 and 1 in order to use
either ARMv6j (e.g. on Freescale i.MX31) or ARMv6k (e.g. on Freescale i.MX35).
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop the old Sun-specific variants used in old workstations (pre-1997)
and other useless ones.
The V7 ISA is a very old cpu only used in the first Sun workstations,
the toolchain support is broken: the cpu doesn't do hardware div and
it's not handled elsewhere.
The sparclite is also a very old Fujitsu cpu only used in early 90s Sun
machines (includes f930 & f934).
The sparclet (tsc701) was a microcontroller-variant.
The supersparc and hypersparc are just V8 variants also used in old Sun
workstations/servers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the arm processor types: add the cortex A5 & A15 variants.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the powerpc processor types.
Remove the 801, it's the original IBM experimental implementation.
Add the 464, 464fp, 476 and 476fp cores.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Suggested by Yann E. Morin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Yann E. Morin, there is a better way than our current
big Config.in.common to define the gcc mtune, mcpu, march,
etc. values. We can split the setting of those values in each
architecture file, which makes a lot more sense.
Therefore, the Config.in file now creates empty kconfig variables
BR2_ARCH, BR2_ENDIAN, BR2_GCC_TARGET_TUNE, BR2_GCC_TARGET_ARCH,
BR2_GCC_TARGET_ABI and BR2_GCC_TARGET_CPU. The values of those
variables are set by the individual Config.in.<arch> files. This is
possible because such files are now only conditionally included
depending on the top-level architecture that has been selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
target/Config.in.arch had become too long, and we want to remove the
target/ directory. So let's move it to arch/ and split it this way:
* An initial Config.in that lists the top-level architecture, and
sources the arch-specific Config.in.<arch> files, as well as
Config.in.common (see below)
* One Config.in.<arch> per architecture, listing the CPU families,
ABI choices, etc.
* One Config.in.common that defines the gcc mtune, march, mcpu values
and other hidden options.
[Peter: space->tab fix, mipsel64 little endian, mips3 as noted by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
