Disable paxtest on microblaze to avoid the following build failure:
shlibtest.c:9:1: error: requested alignment '65536' exceeds object file maximum 32768
9 | char shbss[PAGE_SIZE_MAX] __pagealigned;
| ^~~~
Updating second patch to set PAGE_SIZE_MAX to 32768 will raise another
build failure:
/tmp/cccMSYDr.s: Assembler messages:
/tmp/cccMSYDr.s: Error: PC relative branch to label buf which is not in the instruction space
Fixes:
- http://autobuild.buildroot.org/results/aba489143b4017617f67c1012bba1f4687708380
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
More than five years ago, we added some patches to specific versions of
U-Boot. There is actually little point in maintaining patches for some
versions but not others. In addition, it's pretty unlikely that anyone
is using those specific old versions nowadays. Therefore, get rid of
those patches.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Copy the basic syntax of package/polkit/S50polkit and change the following:
- Add DAEMON, DAEMON_PATH, PIDFILE and DAEMON_ARGS variables.
- Fix shellcheck warning SC2166 on line 16.
- Fix shellcheck warning SC2181 on lines 29 and 34 by assigning the return
code from the start-stop-daemon binary to a variable, and then check the
value of the variable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch is a temporary fix for the kv260 u-boot.itb generation
until a proper fix has been implemented within u-boot.
The problem is u-boot can only be configured to use the kria k26
som dts configuration at build time, and the kv260 carrier board
overlay is missing from the build. Without this, all of the carrier
board drivers are missing.
This patch will be removed from buildroot once u-boot can build a
correct u-boot.itb for the kria kv260 starter kit including the
carrier board overlay and corresponding drivers:
https://lore.kernel.org/all/20920b0df6b067aca4040459a9677d7d1d6d766a.1615354376.git.viresh.kumar@linaro.org/
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[yann.morin.1998@free.fr: add URL provided by Luca]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot documentation section 9.2.1.6 "Additional kernel extensions"
indicates support for kernel extensions defined in external buildroot
trees but unfortunately, there didn't seem to be any support in
br2-external script.
This patch copies 'init' code support to include external kernel
extensions defined in 'linux' dir at the br2-external root directory as
explained in documentation.
Signed-off-by: Nicolas POIROT <ni.poirot@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop package as it doesn't build with latest kernel and project is not
maintained anymore: code has been removed in 2017 as driver is available
in the linux-next tree (cf.
3bb1d33ad9):
In file included from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/drv_types.h:25,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./core/rtw_cmd.c:17:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/autoconf.h:27:2: error: #error CONFIG_WIRELESS_EXT needs to be enabled for this driver to work
27 | #error CONFIG_WIRELESS_EXT needs to be enabled for this driver to work
| ^~~~~
In file included from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service.h:23,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/drv_types.h:27,
from /home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./core/rtw_cmd.c:17:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h: In function ‘_init_timer’:
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h:97:8: error: ‘_timer’ {aka ‘struct timer_list’} has no member named ‘data’
97 | ptimer->data = (unsigned long)cntx;
| ^~
/home/autobuild/autobuild/instance-3/output-1/build/rtl8723bs-11ab92d8ccd71c80f0102828366b14ef6b676fb2/./include/osdep_service_linux.h:98:2: error: implicit declaration of function ‘init_timer’; did you mean ‘_init_timer’? [-Werror=implicit-function-declaration]
98 | init_timer(ptimer);
| ^~~~~~~~~~
| _init_timer
Fixes:
- http://autobuild.buildroot.org/results/7a473e83d4a3d1e2228f4ee1282e85697de4ae5d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds a test case that
1) Builds the complete LLVM and CLANG set of host tools
2) Cross-compiles the compiler-rt runtime using CLANG
3) Builds a cross-compiled application using CLANG and the libfuzzer
compiler-rt library.
4) Executes the fuzz application (part of the libfuzzer package) on
target and checks expected output for a heap-buffer-overflow.
Note: The libfuzzer package is just a tutorial example of how to use
the toolkit provided by llvm (Thus not adding it as a full
Buildroot package).
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
[Arnout: add Matt to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to use Clang as a host cross-compiler for Buildroot, we
need to provide at least the path to the sysroot (using
--sysroot) and some other compiler flags.
This series looks to reuse the toolchain wrapper for GCC since
Clang support most of the gcc flags used in the Buildroot's
toolchain wrapper. The only flag -mfused-madd (deprecated
since gcc 4.6) for mips is not supported by clang. Since
Clang require gcc >= 5.x this flag can never be used.
host-clang refers to an existing GCC-based toolchain (internal or
external) for libstdc++. However, a Buildroot external toolchain
gets a different BR_CROSS_PATH_SUFFIX. Therefore, we can't reuse the
toolchain-wrapper that gets built for the GCC-based toolchain, but
instead have to compile an additional clang-specific wrapper, called
toolchain-wrapper-clang.
After building the clang toolchain wrapper, create the symlinks needed
to force package infrastructure to use clang througt the wrapper.
Initially clang install the clang-8 binary and create all other symlinks:
# clang -> clang-8
# clang++ -> clang
# clang-8
# clang-cl -> clang
# clang-cpp -> clang
Use a post install hook to rename the clang-8 binary to clang-8.br_real
and recreate all symlinks:
# clang -> toolchain-wrapper-clang
# clang++ -> toolchain-wrapper-clang
# clang-8 -> toolchain-wrapper-clang
# clang-8.br_real
# clang++.br_real -> clang-8.br_real
# clang.br_real -> clang-8.br_real
# clang-cl -> toolchain-wrapper-clang
# clang-cl.br_real -> clang-8.br_real
# clang-cpp -> toolchain-wrapper-clang
# clang-cpp.br_real -> clang-8.br_real
NOTE: *.br_real symlinks are needed as the wrapper references them
Use the previously introduced CLANG_VERSION_MAJOR variable to create
theses symlinks.
Set BR_CROSS_PATH_SUFFIX to ".br_real" as for the Buildroot's internal
GCC toolchain backend to find the "real" clang binary installed in
$(HOST_DIR)/bin.
Borrow TOOLCHAIN_WRAPPER_BUILD and TOOLCHAIN_WRAPPER_INSTALL to
build and install the specific clang toolchain wrapper.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
To build libfuzzer package Matthew Weber noticed that (host) clang
doesn't run on the host without "-B $(HOST_DIR)/opt/ext-toolchain"
option. This option add a new search path for binaries and object
files used implicitly.
Without -B clang fail to link due to missing crtbeging.o file and libgcc:
output/host/bin/aarch64-linux-gnu-ld: cannot find crtbegin.o: No such file or directory
output/host/bin/aarch64-linux-gnu-ld: cannot find -lgcc
Indeed, clang search path doesn't include the dafault cross-gcc's search paths:
$ output/host/bin/clang -print-search-dirs
programs: = output/host/bin:output/host/bin:/..//bin
libraries: = output/host/lib/clang/8.0.0:
output/host/bin/../lib64:
/lib/../lib64:
/usr/lib/../lib64:
output/host/bin/../lib:
/lib:/usr/lib
Here is the same command for cross-gcc:
$ output/host/bin/aarch64-linux-gnu-gcc -print-search-dirs
install: output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/
programs: = output/host/opt/ext-toolchain/bin/../libexec/gcc/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../libexec/gcc/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/bin/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/bin/
libraries: = output/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../lib/gcc/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/lib/aarch64-linux-gnu/8.3.0/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/lib/../lib64/:
output/host/aarch64-buildroot-linux-gnu/sysroot/lib/aarch64-linux-gnu/8.3.0/:
output/host/aarch64-buildroot-linux-gnu/sysroot/lib/../lib64/:
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/aarch64-linux-gnu/8.3.0/:
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/../lib64/:
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/../../../../aarch64-linux-gnu/lib/:
output/host/aarch64-buildroot-linux-gnu/sysroot/lib/:
output/host/aarch64-buildroot-linux-gnu/sysroot/usr/lib/
We can see that gcc default search path contains
"output/host/opt/ext-toolchain" directory where the external toolchain
has been extracted.
Since we want to use clang without additional option like -B,
patch clang in order to use GCC_INSTALL_PREFIX instead of
using automatic detection (which doesn't work for Buildroot).
We eventually want to relocate the Buildroot SDK containing the clang
cross-compiler, so we provide a relative path to GCC_INSTALL_PREFIX
in order to avoid to hardcode the path to the GCC toolchain.
Also the path between clang and the GCC external toolchain is not always
the same, we have the following case:
* Toolchain to be downloaded and installed
The toolchain is extracted into $(HOST_DIR)/opt/ext-toolchain, so the
path is "../opt/ext-toolchain".
* Pre-installed toolchain
The toolchain is localed somewhere in the host filesystem and
defined by the user using BR2_TOOLCHAIN_EXTERNAL_PATH.
So, set GCC_INSTALL_PREFIX using realpath:
-DGCC_INSTALL_PREFIX:PATH=`realpath --relative-to=$(HOST_DIR)/bin/ $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)`
When we use a Buildroot's internal toolchain, clang will find theses
crt*.o files and libgcc.
http://lists.busybox.net/pipermail/buildroot/2019-August/256204.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds support for the compiler-rt (CLANG runtime) library.
It builds a set of static libraries and installs them into the
CLANG/LLVM toolchain resource folder. These libraries can then be
used by developers in the SDK for building target applications for
analysis.
What is fuzzing and why libfuzzer?
https://www.moritz.systems/blog/an-introduction-to-llvm-libfuzzer/
The compiler-rt fuzzer and address sanitizer tools require additional
LLVM binary tools installed to allow stack trace decoding actively during
executable analysis. This patch conditionally enables these tools.
https://github.com/google/sanitizers/wiki/AddressSanitizerCallStack
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Cc: Michael Drake <michael.drake@codethink.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* Converts to the cmake pkg type
* Updates download site
* Adds a crosscompile fixups patch
* Allow prepare_builtins utility to be directly called
(it isn't installed into the path when cross compiling)
* Fix file_find() for root search limitation
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages such as libclc need to override cmake toolchain
variables, to avoid errors caused by trying to set overriden
variables ensure that they are not defined before being set.
This prevents difficult to debug silent dropping of overriden
variables.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
UUU (Universal Update Utility) is a Freescale/NXP I.MX Chip image deploy
tools. It is an evolution of MFGTools (aka MFGTools v3). For this and
for backward compatibility we have created a new package instead of
updating the mfgtools package.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Arnout: fix check-package warnings]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
arm-gnu-a-toolchain is now deprecated to be replaced by arm-gnu-toolchain.
The old link [1] now points to a shared page between Cortex-A and
Cortex-R/M [2].
Rename the package, taking into account legacy info, while bumping it.
Also update TF-A package that depends on it.
[1] https://developer.arm.com/downloads/-/gnu-a
[2] https://developer.arm.com/Tools%20and%20Software/GNU%20Toolchain
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that all of the extlinux.conf files have been removed,
it is no longer necessary to check if the file exists.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_kria_kv260_defconfig to auto-generate the
extlinux.conf file.
The board/zynqmp/kria/extlinux.conf and board/zynqmp/kria/post-build.sh have
been removed as they are no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_zcu102_defconfig and zynqmp_zcu106_defconfig to
auto-generate the extlinux.conf file.
The board/zynqmp/extlinux.conf has been removed as it is no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch uses the BR2_ROOTFS_POST_SCRIPT_ARGS to auto-generate the
extlinux.conf file, so developers will only need to modify the
board_defconfig file to change the console and boot file system locations.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The support for this architecture has been removed from the upstream
Linux kernel, as of commit:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aec499c75cf8e0b599be4d559e6922b613085f8f
Which states:
The nds32 architecture, also known as AndeStar V3, is a custom
32-bit RISC target designed by Andes Technologies. Support was added
to the kernel in 2016 as the replacement RISC-V based V5 processors
were already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
There has also been little to no maintenance done in Buildroot for
this architecture in recent times, so let's follow the Linux kernel
community decision and drop support for this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support, remove the
only defconfig that used this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure without SSP raised since the addition of
the package in commit f0d37e275a:
/home/autobuild/autobuild/instance-5/output-1/host/lib/gcc/i686-buildroot-linux-musl/9.4.0/../../../../i686-buildroot-linux-musl/bin/ld: talloc.c.5.o: in function `_vasprintf_tc':
talloc.c:(.text+0x427d): undefined reference to `__stack_chk_fail_local'
Fixes:
- http://autobuild.buildroot.org/results/e221bde25c7622db99761d0adcd56663296beb15
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
libmodsecurity embeds several mbedtls source files since version 3.0.0
and
a3ae686f25
resulting in the following static build failure if curl is built with
mbedtls support:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/m68k-buildroot-uclinux-uclibc/bin/ld.real: /home/buildroot/autobuild/instance-0/output-1/host/bin/../m68k-buildroot-uclinux-uclibc/sysroot/usr/lib/libmbedcrypto.a(md5.c.o): in function `mbedtls_md5_free':
md5.c:(.text+0x16): multiple definition of `mbedtls_md5_free'; ../../src/.libs/libmodsecurity.a(libmbedtls_la-md5.o):md5.c:(.text+0x16): first defined here
Fixes:
- http://autobuild.buildroot.org/results/98472a3a41cdbcb3d02289a437074a267f4b2e8e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix version to better match what is expected by NVD NIST database,
release-monitoring.org as well as upstream github
(https://github.com/freeswitch/sofia-sip/tags)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Instead of waiting almost 10 seconds foreground (3 discovery packets for
3 seconds retry delay) at each boot, make only one request then fork to
background. This way, the behavior is the same for working interfaces,
but it's way faster for interfaces where the address cannot be obtained
straight away.
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Actually, configuring a wifi interface as per "interfaces" man:
auto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant.conf
doesn't work on buildroot because the line wpa-conf is ignored due to
the lack of a proper ifupdown script to handle the wpa_supplicant
initialization.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Default configuration file is wrong for the default compiling options.
Fixes:
Successfully initialized wpa_supplicant
Line 1: unknown global field 'ctrl_interface=/var/run/wpa_supplicant'.
Line 1: Invalid configuration line
'ctrl_interface=/var/run/wpa_supplicant'.
Failed to read or parse configuration '/etc/wpa_supplicant.conf'.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is a maintenance release includes important security updates that
fixes possible vulnerability in URL decoding (see the report attached
below). All the qDecoder users are recommended to upgrade to this
version as soon as possible.
Fix CVE-2022-32265
Update hash of COPYING (change in year and URL removed:
51bdcc2c15745878212d)
https://github.com/wolkykim/qdecoder/releases/tag/v12.1.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
