This package adds Marvell Armada SoC DDR training algorithms.
This code is not built separately, it is needed as dependency
to build ATF firmware for Marvell Armada SoCs.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas:
- Remove MV_DDR_MARVELL_SRC_SYMLINK, ATF will directly pick up the
mv-ddr-marvell code from where it is.
- Use "mv-ddr-marvell" as the Config.in prompt, and in the comment
header of the .mk file.
- Add upstream URL in Config.in help text
- Adjust license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some ARM64 platforms (such as Allwinner A64/H5) have a boot process
where U-Boot encapsulates the BL31 part of the ARM trusted
firmware. For such platforms, we need to build ATF before U-Boot, and
pass a BL31 variable pointing to ATF bl31.bin to the U-Boot build
process.
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31 variable to
achieve this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- Rename option to BR2_TARGET_UBOOT_NEEDS_ATF_BL31
- Drop changes to arm-trusted-firmware.mk, they are taken care of by
previous commits.
- Improve Config.in help text
- Add missing dependency on arm-trusted-firmware when
BR2_TARGET_UBOOT_NEEDS_ATF_BL31 is enabled.
- Use bl31.bin from $(BINARIES_DIR) instead of taking it from ATF's
build dir.]
[Peter: depend on toplevel atf option and select bl31 option. Ensure it
cannot be enabled together with ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
as that would cause circular dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some platforms (e.g Allwinner ARM64) don't build a FIP image out of
ATF, but only a BL31 image, which is then encapsulated in U-Boot. This
commit adds an ATF option to build such an image.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ATF can be used in different ways:
- ATF encapsulates U-Boot as the BL33, which is what is done on ARM
Juno (currently supported in Buildroot) and Marvell platforms (soon
to be supported)
- U-Boot encapsulates ATF's BL31, which is what is done on Allwinner
ARM64 platforms.
Until now we were assumming the former was always the case, but
obviously it isn't. Therefore, this patch adds an option that allows
to explicitly tell ATF that it encapsulates U-Boot as its BL33.
We adapt the only defconfig that uses ATF so that it enables this
option as appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, our arm-trusted-firmware unconditionally builds a FIP
(Firmware Image Package). While this is often needed on platforms
where ATF encapsulates U-Boot, it is not the case on some other
platforms where it's U-Boot that encapsulates parts of ATF.
In order to prepare the support for the later platforms, we make
building the FIP image optional, and update the only defconfig we have
that uses ARM Trusted Firmware.
Note: we considered adding a "default y" here to preserve backward
compatibility, but there really isn't any default that is sane:
whether a FIP image needs to be built or not is purely platform
specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license is actually GNU LIBRARY GENERAL PUBLIC LICENSE
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we re-organised the list of cores (in 52d500aa35) and introduced
some new cores (in e9960da6ec, d632d9e5a9, 6317a199ec), the default for
AArch64 was accidently changed from A53 to A35.
So, restore the default to A53 for AArch64.
Reported-by: daggs <daggs@gmx.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: daggs <daggs@gmx.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install the libraries to staging to be usable by other packages.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This board is quite similar to orangepi-one board. Instead of ethernet, it
has RTL8189FTV SDIO WiFi chip.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patches are no longer needed because they have been pushed back into
the upstream axfs repository.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Refresh patch #6.
Drop patch #9, parallel build fixed in upstream commit 7dad1f268f12.
Renumber the next patch.
Add reference to upstream signature, and license hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The HDF5 package is used by flann for testing purpose only and is
not part of buildroot packages. However, if present in the host, it will
be used and trigger the unsafe header/library path used in
cross-compilation error.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 640c988fd4, erts/configure adds -lz to LIBS but
this variable is also used in some Dynamic Erlang drivers. Fix
Makefiles in such drivers to use the LDLIBS variable instead.
This patch has been reported upstream (see
https://bugs.erlang.org/browse/ERL-529) and should fix:
http://autobuild.buildroot.net/results/3a3b9a4568c706bd6caad3c63d356680c8405ac5/
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also update the license file location and add a hash for the license file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new version includes a fix to allow compilation with compilers
defaulting to -fpie (gcc 6+). It also a fix for a critical bug in
Cobalt:
http://xenomai.org/pipermail/xenomai/2017-November/037923.html
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes building against static libssl:
http://autobuild.buildroot.net/results/7edb3756a07bbac27f852332b81677feb6156a48/
The major change between 2.16 and 2.16.1 that fixes static linking
with libssl is that pkg-config is now used to detect
libssl. Therefore, we add a dependency on host-pkgconf.
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openssl is a virtual package, that can be provided by either libressl
or libopenssl, so there's no need to check for libressl separately.
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-1000405.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: adjust commit description to mention the CVE being fixed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed 0006-i18n-Drop-include-xlocale.h.patch, problem was fixed
upstream with a different solution:
http://bugs.icu-project.org/trac/changeset/40603
Added upstream sha512 hash and license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The S20random is indented with tabs, except for 3 lines. Change
to be consistent.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 2.0.16 we now have uncompressed kernel size available
for ARM starting v4.14 and later kernels.
Let's also remove the extra space after the checksum while at it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
