Misc fixes and improvements all over the place, mostly fixes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes a few shortcomings in the boot firmware:
- emmc pll clock issues
- audio underruns and chirps
- unload of sensor drivers (?)
- missing config.txt no longer borks the boot
- lockups during long exposures on the camera
- YUV-to-texture fastpath for the camera
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These instructions should probaby go in the Buildroot manual, but at
this point, it's not clear in which section they should go. So in
order to not loose those notes, add them to the Grub help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Grub can be configured to enable or disable the filesystems supported
in the stage 2. In addition, there are filesystem specific stage
1.5. In order to save space and build time, we provide a new option
that allows to give a space-separated list of filesystems that Grub
should support.
We default to support FAT and ext2, since most of the other
filesystems are fairly unlikely to be used.
We use this option to:
1) Pass --enable-<fs> or --disable-<fs>, which enables/disables the
support of <fs> in Grub stage 2.
2) Install only the stage 1.5 that correspond to the selected
filesystems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the splashimage line in menu.lst only active when splashimage
support has really been enabled in the Grub configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Two improvements to the menu.lst file:
* Do not enforce any video mode, let the kernel use whatever it wants
as the default, or let the user customize it when needed.
* Use /dev/sda1 instead of /dev/hda1. Nowadays, most hard disk
controllers are handled using libata, and therefore the disks are
visible as /dev/sd<X>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit brings a number of improvements to the grub packaging:
* It builds grub with the host compiler, which is needed so that we
can build a 32 bits grub even if the target architecture is
x86-64. To make sure we have a host compiler capable of generating
32 bits code, grub now selects the BR2_HOSTARCH_NEEDS_IA32_COMPILER
option. Building with the host compiler is done by cheating and
passing $(HOST_CONFIGURE_OPTS) in GRUB_CONF_ENV.
* Some additional CFLAGS are added to make sure grub builds properly
with modern compilers (-O0, --build-id=none, -fno-stack-protector).
* Removal of the GRUB_INSTALL_STAGING_CMDS which were not used, since
GRUB_INSTALL_STAGING was not set to YES.
* Installation of the "grub" binary in $(HOST_DIR) instead of
$(TARGET_DIR) since it's actually used only on the host to install
grub into an image or device.
* Removal of the grub uninstall commands, since they are generally
considered useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the OBJCOPY and RANLIB variables to
HOST_CONFIGURE_OPTS, since grub legacy will need these defined in
order to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some bootloaders (such as Grub) need to be built for x86 (i.e IA32)
even if the target architecture is x86-64. However, when the target
architecture is x86-64, the cross-compiler generated by Buildroot is
not able to generate 32 bits code.
To solve this, we will rely on the host compiler being a x86 + x86-64
compiler. Therefore, this commit introduces the
BR2_HOSTARCH_NEEDS_IA32_COMPILER option, which tells the dependency
checking logic to verify that the host compiler is indeed capable of
building x86 32 bits code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnl-3 uses threads and this isn't accounted for in crda or
libnl-3*.pc files since crda doesn't use pkg-config.
Since linking order matters for static scenarios also throw in -lnl-3
into NLLIBS first since it gets appended to in crda makefiles to add
libnl-3.
libgcrypt depends on libgpg-error and this isn't accounted for in
crda makefile, but it is in libgcrypt-config script (in the correct
order for static linking), so set LDLIBS calling this script.
Fixes:
http://autobuild.humanoidz.org/results/31c/31c54e16b60f41e2aa9ea6cd43ced694d3ce3ce0/http://autobuild.humanoidz.org/results/a45/a4548583aa63fbf6db9dbdf7e1556b0d23800de5/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dbus-python requires xml.parsers.expat, which is provided by the pyexpat
module. This patch enables the pyexpat module as a dependency when dbus-python
is selected.
[Peter: fixup whitespace]
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This libtool change ensures that ld uses the right machine emulation file,
which will allow to fix several MIPS64 n64 link failures, such as the one
currently visible on the libiscsi package. Packages affected by this
problem will have to use <pkg>_AUTORECONF = YES to benefit from this libtool
fix, until they are fixed upstream.
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5base fails to compile on MIPS64 BigEndian n64 platforms because there
are multiple calls to some functions that are disabled. Since every Qt5
package depends on qt5base we can disable Qt5 entirely. This is a quick
fix for the next release. In the meantime, a proposed patch to fix this
problem has already been sent to Qt:
https://bugreports.qt-project.org/browse/QTBUG-35228
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnl-3 uses threads and this isn't accounted for in hostapd (or
libnl-3*.pc files for that matter - hostapd doesn't use pkg-config
anyway).
Since linking order matters for static scenarios also throw in -lnl-3
into LIBS first since it gets appended to in hostapd makefiles to add
libnl-3.
Fixes:
http://autobuild.buildroot.net/results/d4a/d4a9f44effeb08eda6c4b32764274ae81d185d5e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove -Werror from CFLAGS to avoid build failures caused by warnings.
Fixes the following autobuild failure on MIPS64 n32/64:
http://autobuild.buildroot.net/results/6be/6be075726ac6db0a48dd6b535841ada932c9ffbb/
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For now, it doesn't use ccache when compiling host tools (e.g. qmake).
It seems the fix is not trivial.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Simplify our custom qmake.conf:
- Include linux_device_{pre,post}.conf to inherit common device
configuration.
- Do not add $(STAGING_DIR)/usr/include to include path. It is
redundant.
In additon to the simplification of code, this change is a preparation
to solve problems occurring when QMAKE_CXX is prepended with ccache path.
Upstream patch is needed by configure to parse device options correctly.
Another upstream patch is needed to remove ARM specific parts from
linux_device_post.conf.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Slim down the kernel config, switch to ext4 (with ext2/3 support),
enable N32 & O32 ABI compatibility for extra testing goodness and enable
keyboard & mouse support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc only works well for O32 ABI on mips64, so default to eglibc that
works just fine with N32 & N64 ABIs as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package selects BR2_PACKAGE_QT_SCRIPT which is not supported on
certain platforms. To prevent this behaviour we use the same solution as
we applied for BR2_PACKAGE_QT_SCRIPT
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BINDIR is used to point systemd/dbus service files to the correct binary
path where wpa_supplicant resides.
So define it to avoid the default /usr/local path that doesn't work.
Solves bug #6704
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_LVM2_DMSETUP_ONLY is a "negative" option that disables
build and install of part of the suite. This option cannot be unselected
by other config options, which gives a problem for BR2_PACKAGE_UDISKS_LVM2:
it needs BR2_PACKAGE_LVM2_APP_LIBRARY, which requires the full suite.
Therefore, replace the negative BR2_PACKAGE_LVM2_DMSETUP_ONLY by a positive
BR2_PACKAGE_LVM2_STANDARD_INSTALL. To make sure that existing defconfigs
keep working, the new option defaults to y unless the legacy
BR2_PACKAGE_LVM2_DMSETUP_ONLY was selected.
Fixes http://autobuild.buildroot.net/results/ea4627cae45e972ebba5b33a2b2871ce7f46fedc/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch has a minor mistake so fix it.
Credit go to Daniel Mentz <daniel@exxm.de> for the detailed bug report.
Closes bug #6428
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
