This reverts commit 7e50574965.
Now that we've bumped the libpng version, we shouldn't look for it among the
older releases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes e.g.
http://autobuild.buildroot.net/results/9c7/9c7a97882d446a42cabcb07e4af7e6825192e70b
VLC cannot build static and shared libraries at the same time.
Also, live555 only has a static library, and VLC tries to link this into
a shared library. Therefore, disable the live555 plugin unless static
linking is selected. It would be better to build live555 as a shared
library, but that's for another patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix a large number of incorrect configure options for vlc.
Configure warnings reported by Arnout Vandecappelle, in his analysis of vlc
autobuild failures.
Notice that this change of configure options is caused by our AUTORECONF
picking up a different PKG_WITH_MODULES definition. If vlc is bumped in the
future and AUTORECONF is turned off, then this needs to be reverted.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libusb support is requested in pcsc-lite, the configure script will try
to link a test application to check libusb_init(). However, when libusb
needs threads, the linking step should link in threads as well.
The configure script, first tries to call libusb-config to determine the
necessary cflags and libraries (which should include the thread flags), but
this program does not exist, so the cflags/libs variables are empty.
Therefore, add a patch to explicitly add PTHREAD_CFLAGS and PTHREAD_LIBS to
the libusb test, so libusb is detected correctly.
Fixes
http://autobuild.buildroot.org/results/432/432be0db3f8415f6a026b69234579ad4d23b6421/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(external) nios2 toolchain is currently missing the fallocate64 system
call. Because of compiling the e2fsprogs package with _FILE_OFFSET_BITS=64,
_LARGEFILE_SOURCE and _LARGEFILE64_SOURCE the fallocate call is replaced
by fallocate64 by the glibc. Therefore fallocate is entirely disabled while
configuring the package.
Fixes http://autobuild.buildroot.org/results/70a/70a47bd7392560cbc1c64769c8357c0b4c91ca3b/
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
e4defrag has to be disabled because of the (external) toolchain declares
the fallocate64 call in the header files but don't implement it in the
library. e4defrag defines its own fallocate64 function that throws an
error because of the previous declaration in the toolchain header.
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc build scripts use wrong variable name to specify xtensa overlay
application command. As a result gcc is built with the default overlay,
which leads to obscure failures later in the build process.
xtensa toolchain needs an additional configuration for a specific core
variant we're building for. This configuration is called 'overlay' and
is an archive with files for binutils, gcc and gdb that replace
corresponding files in toolchain components.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-libxml2 package does not depend on zlib or lzma, but may
detect versions available on the host. This can cause problems in the
following situation:
1 host-libxml2 is built, finds an available lzma library in the
system, enables lzma support by using it.
2 host-xz is built, which installs a different version of the lzma
library into $(HOST_DIR)
3 host-libxslt is built, tries to link against libxml2, which fails
because now the visible lzma library is the one from
$(HOST_DIR)/usr/lib and no longer the one libxml2 was built agains.
To fix this, this patch passes --without-zlib and --without-lzma to
the host package.
In addition, since the target variant of libxml2 does not have
provisions to depend on the target lzma, we also pass --without-lzma
for the target variant. The case of zlib for the target was already
properly taken into account.
Fixes:
http://autobuild.buildroot.org/results/6dc/6dcef647eb0f0db7de3f34194eb15ceebc645b39/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To install its shared library, the luajit Makefile does:
cd src && test -f $(FILE_SO) && \
$(INSTALL_X) $(FILE_SO) $(INSTALL_DYN) && \
$(LDCONFIG) $(INSTALL_LIB) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT1) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT2) || :
This means that if ldconfig doesn't work or isn't available on the
system, it won't create the libluajit-5.1.so -> libluajit-5.1.so.5.2.0
symbolic link.
Not having this symbolic link prevents lua-ev from finding the shared
version of the luajit library, and it fallbacks to using the
libluajit.a static library. However, this static library is not built
with -fPIC, so using it within a shared library doesn't work, and
leads to build failures on architectures that really do want to have
non-fPIC code into a shared library, such as x86-64.
By passing LDCONFIG=true during the installation steps of luajit, we
ensure that the symbolic links are created, which allows lua-ev to
detect the shared library properly, making everybody happy.
Investigation conducted with Samuel Martin. Thanks!
Fixes:
http://autobuild.buildroot.org/results/41c/41c8bb9cf91a86908a150dae27726136cb56f5b7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default $(PKG)_AUTORECONF_OPT already includes the -i and -f flags,
so there is no point in specifying these in the package makefile. Further,
the -v option to autoreconf is not required.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default $(PKG)_AUTORECONF_OPT already includes the -i flag,
so there is no point in specifying this in the package makefile.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default $(PKG)_AUTORECONF_OPT already includes the -i and -f flags,
so there is no point in specifying these in the package makefile.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ti-gfx uses custom extract commands, which first and foremost removes
the source dir unconditionally.
Thee side-effect of this is that make will re-extract, re-patch and
probably re-build ti-gfx at each run.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a sequence number to the newclkapi patch.
Rebase it ontop of the 5.01.00.01 release.
Note: this is barely tested. It applies neatly, but I can't test it,
since I do not have the hardware. I bumped the patch by basically
renaming the problematic functions like the previous patch did:
s/clk_enable/clk_prepare_enable/
s/clk_disable/clk_disable_unprepare/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this config prevents the introduction of some HOST_DIR paths on target
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
since the comeback of version in module path (see commit ccd68a51)
the upstream Makefiles are usable for install.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Useless since the uninstall commands were removed in eb7bd9ef
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A bug has been reported upstream to fix this issue properly, and a
GStreamer developer agreed with our proposal. We add the bug URL to
comments on Config.in to let the interested users follow the progress of
this issue.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CHANGES version 5.7:
https://mmonit.com/monit/dist/CHANGES.txt
Signed-off-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We've seen autobuilder failures for vlc on many platforms and we don't
know how to solve them. It is also currently orphaned, i.e. there is
nobody who is actively using the package and maintaining it in
buildroot.
We could mark the package as BROKEN, but that would make it completely
invisible for the users and the autobuilders, which would not help its
orphan-ness. Therefore, instead, add a big fat warning in the config
menus that it has known issues.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When I saw this patch it took me a while to figure out how/why it worked,
so let's make life easier for the eventual version bumper to understand
what's going on here.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/858/8580840f6e41f198d2cfc0609e14765dbc2e7322/
kconfig uses the first 'default ... if' line that matches, so ensure the
arch specific ones come before the generic 7.5.1 default, otherwise
arc/microblaze ends up with 7.5.1 instead of their custom version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of dependency check for virtual package <foo>
defines FOO_CONFIGURE_CMDS to print an error message if the
dependencies are not met.
This patch updates all the virtual packages to use the GNU Make control
function $(error text...) instead.
This makes the error happen at the beginning of the build, with a clearer
message.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When systemd is chosen as init system, the required kernel features are
enabled.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The udev virtual package and its current providers (eudev and systemd)
have been updated to use the latest version of virtual package
infrastructure.
A provider should now select BR2_PACKAGE_HAS_UDEV and well as set a
value for BR2_PACKAGE_PROVIDES_UDEV.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do all substitutions on the .config file in a single sed command.
Make the .config file editing a lot more readable. Based on ideas
brought up by Arnout Vandecappelle on the mailing-list.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(build-test with all features enabled)
[Samuel: rebase on head of master]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This also fixes the download URL as oudated versions have been
moved to the "older-releases" sub-folder.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2013-6466.
openswan-wno-error-cpp.patch is no longer required since it's now
conditional on a check for a modern enough compiler.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gstopencv.c includes the old-style header opencv/cv.h which includes a
set of module's headers. To satisfy the opencv/cv.h requirements we need
to select the modules which provide the required headers.
Fixes:
http://autobuild.buildroot.net/results/f5b/f5b248eb7be38d6eb3655cdc1ab6ee5e716b9b29/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Samuel Martin <smartin@aldebaran-robotics.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 0.8 version hasn't seen any updates since 2005, and there's no real
reason to continue to use it today, so deprecate it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes runtime failure of gst-fsl-plugins, e.g.
(gst-plugin-scanner:1700): GStreamer-WARNING **: Failed to load
plugin '/usr/lib/gstreamer-0.10/libmfw_vpu.so':
/usr/lib/libgstfsl-0.10.so.0: undefined symbol: shm_open)
when compiled with buildroot/glibc toolchain.
See also old buildroot mailing list request [1].
[1] http://lists.busybox.net/pipermail/buildroot/2013-June/073910.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
