This reverts commit bc51605259.
which adds a dependency on python3 as well as adddtional python runtime
modules. So revert this patch to polish a better bump.
Fixes:
- http://autobuild.buildroot.org/results/7d765d2b15bfe72b05de62e86a01d57f1696c837
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Combining musl and binutils 2.31.1 will produce static applications
that crash immediately. This commit picks up 3 upstream commits to
remedy this.
See https://sourceware.org/bugzilla/show_bug.cgi?id=23428
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
aiohttp isn't a required dependency for aiojobs
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The optional bluez_utils dependency of libpcap creates a circular
dependency:
$ make dbus-show-recursive-depends
Recursion detected for : systemd
which is a dependency of: dbus
which is a dependency of: bluez_utils
which is a dependency of: libpcap
which is a dependency of: iptables
which is a dependency of: systemd
make: *** [package/dbus/dbus.mk:121: dbus-show-recursive-depends] Error 1
Drop support for bluez_utils. For bluez5_utils, which also depends on
dbus, we only need the headers in the bluez5_utils-headers package. Use
that to break the circular dependency.
Fixes:
http://autobuild.buildroot.net/results/9c3/9c3ee798fa6bb501a20a7892c0b085d2b279b664/
Suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump version. Freshen a patch that had a conflict.
Remove duplicate env setting.
Add comment about the hack being used to get gRPC to use the buildroot
c-ares library. Otherwise it looks like the cmake env settings are out
of date vs what the gRPC build documentation says to use.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package error:
package/python-terminaltables/Config.in:4: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Update hash for COPYING.rst, it has been updated to remove
BSD-3-Clause text:
5a6ef3e35d
- Add LICENSE to license files as this is now the file that contain
BSD-3-Clause text
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to github
- Remove patch (already in version)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-artifact is a host tool to generate update images
in the Mender artifact file format.
This package uses the binary archive from github because it bundles the
external dependencies.
Example usage:
$ mender-artifact write rootfs-image \
--update rootfs.ext4 \
--output-path rootfs.mender \
--artifact-name "release-v1.0.0" \
--device-type "beaglebone"
Above will generate a Mender artifact called "rootfs.mender"
containing the "rootfs.ext4" image along with meta-data.
One can read-out the meta-data with the following command:
$ mender-artifact read rootfs.mender
Mender artifact:
Name: release-v1.0.0
Format: mender
Version: 2
Signature: no signature
Compatible devices: '[beaglebone]'
Updates:
0000:
Type: rootfs-image
Files:
name: rootfs.ext4
size: 52428800
modified: 2018-08-27 09:10:55 +0200 CEST
checksum: e70b113fb0964a810a3043586eb4fc1c48e684ba78b02ba65fead4aa3e540d87
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this you can add:
$(eval $(host-golang-package))
to a package .mk file to build for host.
Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Acked-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hidden Config.in option BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS name is
not very clear as to whether it says whether Go is available for the
target architecture or the host architecture.
Until now, this was fine since there was support for host Go
packages. But as we are about to introduce support for building host
Go packages, we need to clarify the meaning of
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS. Since it says whether the target
architecture has support for Go or not, we rename it to
BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS.
And since BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS is tightly related,
we rename it to BR2_PACKAGE_HOST_GO_TARGET_CGO_LINKING_SUPPORTS.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
[Thomas: entirely rewrite commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
xlib_libXrender is enabled by default and has been added since version
1.3.4-1 and
a6c4b29a18
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when we tweak the .la files, we do so unconditionally on all
.la files, even those we already fixed in a previous run.
This has the nasty side effect that each .la file will be reported as
being touched by all packages that are installed after the package that
actually installed said .la file.
Since we can't easily know what files were installed by a package (that
is an instrumentation hook, and comes after the mangling), we use a
trick (like is done in libtool?): we do mangle all files, each into a
temporary location; if the result is identical to the input, we remove
the temporary, while if the result differs from the output, we move
the temporary to replace the input.
Reported-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
aiomonitor adds monitor and python REPL capabilities for
asyncio application.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Asynchronous console and interfaces for asyncio.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Generate simple tables in terminals from a nested list of strings.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when we need to build the full dependency graph, we call make
to show the list of packages (make show-targets), and then call it again
and again iteratively while it returns new packages.
Since calling make will parse the whole set of our Makefiles, this takes
quite a bit of time (~4s each here), and the total can get pretty long.
However, make being make, already builds the whole dependency tree
information, so we can just ask for it.
Add a new top-level rule 'show-dependency-tree' that displays the whole
set of dependencies for all packages. For each package, its name, type
and version is displayed, then all the direct, first-level dependencies
are dumped. We choose a format that is not unlike the dot-graph format,
because it is both easy to read as a human, and easy to parse as a
machine:
foo: target 1.2.3
foo -> bar host-meh
bar: target virtual
bar -> buz
buz: target 2.3.4
buz ->
host-meh: host virtual
host-meh -> host-bleark
host-bleark: host 3.4.5
host-bleark ->
rootfs-meh: host
rootfs-meh -> host-bleark
To be noted: rootfs are currently reported as if they were 'host'
packages, to stay aligned with how graph-depends currently treats them.
Ideally, graph-depends could be enhanced to recognise them separately,
but that is another story.
For just plain defconfig, which is about the smallest config we can have
with an internal toolchain, we already have a seven-fold improvement
(with the graph-depends rule modified to not run the pdf generation, to
be able to just compare the tree generation):
$ time make graph-depends
real 0m27.344s
$ time make show-dependency-tree
real 0m3.848s
>From defconfig, C++, wchar, locales, ssp, and allyespackageconfig,
tweaked for even more packages (qt5 not qt4, luajit to avoid multi
providers, etc...), the timings are (graph-depends still modified to
not generate the pdf):
$ time make graph-depends
real 1m56.459s
$ time make show-dependency-tree
real 0m5.748s
There. I don't think those numbers need any explanation whatsoever;
they do speak on their own. OK, for maths sake, the ratio is about
twenty-fold. So, "yeah", I guess... ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Calling to the graph-depends script is very costly, as it calls back to
'make' a lot of time.
It turns out that we already have the list of recursive dependencies, so
we can just print that.
As for the recursive reverse dependencies, we use the same memoisation
technique to cut-down on the expansion cost, which would otherwise be on
the order of 𝑶(𝑛²) (with 𝑛 enabled packages).
>From a defconfig, modified to use glibc, C++, wchar, locales, ssp, and
allyespackageconfig (tweaked to avoid multi providers, etc...), the
timings for X-show-recursive-rdepends are:
before after speedup #rdeps
libnss 0m22.932s 0m5.775s 3.97x 3
qt5base 0m41.176s 0m5.781s 7.12x 67
libjpeg 0m56.185s 0m5.749s 9.71x 228
libxml2 0m54.964s 0m5.795s 9.48x 271
freetype 0m46.754s 0m5.819s 8.07x 287
libpng 0m53.577s 0m5.760s 9.30x 303
sqlite 1m15.222s 0m5.807s 12.95x 801
libopenssl 1m25.471s 0m5.844s 14.63x 931
readline 1m13.805s 0m5.775s 12.78x 958
libzlib 1m11.807s 0m5.820s 12.34x 1039
toolchain 1m23.712s 0m6.080s 13.77x 2107
skeleton 1m27.839s 0m6.293s 13.96x 2111 (+1)
host-skeleton 1m27.405s 0m6.350s 13.76x 2172 (+2)
- speedup: ratio before/after
- #rdeps: number of recursive reverse dependencies, with the extra
dependencies returned with this patch, see below for the
reason.
So, for a low-level package with a lot of reverse dependencies, like
libzlibz, libopenssl or readline are, the timings are already very much
in favour of the change. This is less impressive with packages that
have few dependencies (libnss), but still much faster.
Also, remember that the config tested has as much packages enabled as
possible, so is in itself a degenerate case. With simpler and more
realistic configurations, the gains would probably be a bit lower than
reported above, but various tests still report good improvements
overall (note: coming up with a 'realistic' configuration is pretty
hard, as everyone and their dog have their notion of what is realistic
in their context, so nothing displayed here; timings are left as an
exercise for the interested parties to report aggravation in their
cases should they notice some regression).
Note that, more recursive reverse dependencies may be displayed now,
since we do not apply the exceptions applied in graph-depends. For
example, host-skeleton gains two new recursive reverse dependencies:
skeleton and toolchain, which are both exceptions in graph-depends.
As for direct (not reverse) dependencies: the gain is not as fantastic
as for reverse ones, but it is still noticeable, especially thanks to
a21212fb7c (package/pkg-generic: speed up RECURSIVE_FINAL_DEPENDENCIES);
just a few examples for %-show-recursive-depends:
before after speedup #deps
libzlib 0m46.864s 0m5.902s 7.94x 17
qt5base 0m57.590s 0m5.848s 9.85x 190
sqlite 0m46.601s 0m5.816s 8.01x 24
Basically, displaying recursive dependencies, direct or reverse, is
almost a constant now: it only slightly varies by about 10% depending
on the complexity of the dependency chain, with the parsing of the
Makefiles still accounting for the large majority of the time.
(PS. Thanks to Joseph for suggesting a list of interesting packages
to test, and thanks to Trent for his example of memoisation!)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Joseph Kogut <joseph.kogut@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-gzip is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-gzip would uselessly
clutter the graph.
So, like for the skeleton, host-skeleton, and host-tar, we cut the
dependency chains toward host-gzip.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host-tar is needed, it is a mandatory dependency of all packages.
As such, drawing the dependency lines toward host-tar would uselessly
clutter the graph.
So, like for the skeleton and host-skeleton, we cut the dependency chains
toward host-tar.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-skeleton is a dependency of almost all packages, except a very few.
As such, it clutters the dependency graph uselessly.
Do with it as we do for the skeleton: cut the dependency chains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some times, multiple dependency graphs for a set of packages (mostly
the application-level packages for the project) are included in reports
(e.g. delivery notes). Repeating the mandatory dependencies on all
those graphs is useless and clutters the important dependencies.
When we had only two such mandatory dependencies (toolchain, skeleton),
it was manageable to list them as manual exclusions:
-x toolchain -x skeleton
But we now have quite a few such dependencies, and it becomes a bit more
cumbersome to manage, not counting the ones we may add in the future.
Add an option to exclude all those mandatory dependencies, to generate
neat graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current graph-depends implementation filters out a number of
"mandatory" dependencies that all packages have: dependency on
"toolchain" and dependency on "skeleton".
Despite this filtering, in full graph dependencies, "toolchain" and
"skeleton" are still shown, because they are target packages, and
therefore appear in the result of "make show-targets". Thanks to this,
they will be visible as dependencies of the "ALL" node, which is the
root of the dependency tree.
However, as we are going to introduce host-skeleton as a "mandatory
dependency" to be filtered out, this is no longer going to work.
This commit adjusts the remove_extra_deps() function to ensure that
when a mandatory dependency is removed, this dependency exists between
the root of the dependency tree and the mandatory dependency.
This issue was noticed by Yann E. Morin, and this commit provides a
different implementation than what Yann proposed in
https://patchwork.ozlabs.org/patch/910453/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- list mandatory deps before removing them
- fix flake8 warnings
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The OpenJDK package supports a non-assembler variant of the hotspot
virtual machine. This allows archtectures which don't have hard-coded
support (which provides better performance) to still build a virtual
machine that can execute JAVA.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6f28ce5322 (package/systemd: enable building of systemd-boot)
made the efi and gnu-efi optiona conditional upon whether systemd-boot
is built or not, but forgot to remove the non-conditional ones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/xenomai/xenomai.hash:3: empty line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test is a simple "Hello, World" integration test of the OpenJDK
package.
It compiles the Java app on the host, then runs it on an emulated
AARCH64 target and verifies "Hello, World" is printed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenJDK is a free and open-source implementation of the Java Platform.
This package provides the option to build a client or a server JVM
interpreter.
The default option is the server option, as that is what the majority
of users use. This JVM interpreter loads more slowly, putting more
effort into JIT compilations to yield higher performance.
Unlike most autotools packages, OpenJDK is exceptionally different and
has many quirks, some of which are below:
- X11, alsa, and cups are required to build Java, even if it's a headless build.
See
http://hg.openjdk.java.net/jdk10/jdk10/raw-file/tip/common/doc/building.html#external-library-requirements
for more information.
- host-zip is needed for the zip executable.
- There is no autogen.sh file, instead, a user must call "./configure
autogen."
- OpenJDK ignores some variables unless passed via the environment.
These variables are: PATH, LD, CC, CXX, and CPP.
- OpenJDK defaults ld to the ld binary but passes -Xlinker and -z as
arguments during the linking process, which causes linking failures.
To fix this issue, ld is set to gcc.
- Make -jn is unsupported. Instead, one must use the "--with-jobs="
configure option, and use $(MAKE1).
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas:
- drop explanations about CC, LD, CXX, etc. be set to their "actual
binaries" instead of ccache: TARGET_CC/TARGET_LD/TARGET_CXX point
to the compiler wrapper, so the usage of ccache is hidden
- make sure at least one of the variants is enabled in Config.in
- drop the submenu for variant selection
- use system zlib instead of the bundled one. This works fine when
BUILD_SYSROOT_CFLAGS and BUILD_SYSROOT_LDFLAGS are passed
- fix minor nits in the Config.in comments]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd-boot is the integration of gummiboot into systemd, when
gummiboot is no longer maintained [0].
Add an option to build systemd-boot as part of the systemd build.
Install the boot files, that can serve as a template for the user
to tweak for their system.
[0] https://cgit.freedesktop.org/gummiboot/commit/?id=55df1539c9d330732e88bd196afee386db6e4a1d
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- add missing depends on i386 || x86_64
- add missing dependency to gnu-efi
- add missing boot files
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the problem with undeclared intptr_t type for builds not including
stdint.h, without breaking builds using -nostdinc.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch (included in this release).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add COPYING to license files as README does not contain the full GPL
text
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also:
* License file has been renamed: LICENSE.txt -> LICENSE
* Update license file hash -> List of contributors are in a seperate
file now
* Configure option `--with-alsadatadir` has been renamed to `--with-alsaconfdir`
* Configure option `--enable-pcm-test` has been removed
* New optional configure option `ofono` (no build dependency, will
disable internal HFP in favor of oFonos HFP profile)
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch (included in this release).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version drops python 2 support and requires cffi.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
