Now that we might happen to build libxml-parser-perl and intltool,
Perl becomes a mandatory dependency. This shouldn't be a problem since
most distributions install Perl by default anyway.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This XML internationalization set of tools is required to build
several of our packages, and may not be available on the host machine.
Only the host variant has been tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we build Perl modules in $(HOST_DIR), PERLLIB must be defined
to $(HOST_DIR)/usr/lib/perl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This Perl module is needed to build intltool, which in turn is needed
to build several of our packages. We assume that Perl is installed on
the host.
Only the host variant of this package has been tested and is used. The
code for the target variant (what to do at the configure, build and
install steps) isn't implemented, but the GENTARGETS call for the
target is mandatory, due to limitations of the Makefile.package.in
infrastructure (if one wants the host package to be implemented, then
the target package *must* exist). This limitation will be removed
after 2010.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Making a full build of libgtk2 for the host is a pain, since it
requires host-cairo, which it turns requires a full X.org stack to be
compiled for the host.
Moreover, building libgtk2 for the host completely is useless: we only
need gdk-pixbuf-csource and gtk-update-icon-cache.
In this patch, we add a new
host-libgtk2-2.12.12-reduce-dependencies.patch, that is only applied
to libgtk2 when being built for the host. This patch removes a lot of
dependencies in configure.in, which allows to:
* run make and make install in gdk-pixbuf/, which compiles and
installs the gdk-pixbuf library and the gdk-pixbuf-csource utility
* run make gtk-update-icon-cache in gtk/, which compiles the
gtk-update-icon-cache utility, which is then installed manually
The compilation and installation steps of libgtk2 for the host are
therefore overriden, so as to not use the default behaviour, which
would attempt to build the full gtk library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They are needed to uncompress the tarballs we download. bzip2, for
instance, is not necessarly installed by default on basic Debian
systems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is BROKEN in the way it compiles make-imglib and text2c
for the host while being in cross-compiled mode. It does not use
CC_FOR_BUILD and CFLAGS_FOR_BUILD as it should.
No upstream release has been made since 2001 and since it is a
relatively useless package, I don't think it's worth the trouble to
sanitize its build system.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libpng is needed on the host to build the make-imglib utility, built
during the compilation of ace_of_penguins for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the compilation of target or host packages, host tools might be
used, and in turn, they might use host libraries installed in
$(HOST_DIR)/usr/lib. Therefore, we pass a LD_LIBRARY_PATH variable
when building packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
zlib is needed on the host, to build xlib_libfontenc on the host, to
build xapp_mkfontscale on the host, in order to finally build xfonts
encodings on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xlib_libfontenc is required to build xapp_mkfontscale on the host,
which in turn is needed to build font encodings for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfontscale on the host is needed to build xfont_encoding, therefore
we add host-xapp_mkfontscale as a dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfontscale on the host is required to build xfonts-encoding for the
target.
We also fix the dependencies. xlib_libX11 is not needed to compile
xapp_mkfontscale. However, xproto_xproto is needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure that libxcb depends on host-xsltproc, since xsltproc is
required for the compilation of libxcb.
Moreover, remove the XSLTPROC=/usr/bin/xsltproc variable definition,
which was assuming that XSLTPROC was installed on the host. xsltproc
should just be part of the PATH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compiling libxcb (from the X.org stack) requires xsltproc on the host,
which is part of libxslt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libtool patch is not applied when building for the target because
it does not apply, so do not attempt to apply it when building for the
host. This fixes libxml2 build for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
automake for the target fails to build if autoconf is not installed on
the host:
checking whether autoconf is installed... no
configure: error: Autoconf 2.58 or better is required.
Please make sure it is installed and in your PATH.
make: *** [/home/test/brbuilttest/build/automake-1.10/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package requires Xaw3d, that has never been packaged in
Buildroot. As no-one seems to be using this package, it's probably not
worth the effort of packaging Xaw3d, a old-looking widget
toolkit. Therefore, just drop the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ace_of_penguins fails to build when xlib_libXpm is not selected. Add
it has a dependency. However, contrary to normal dependencies to
libraries (where we use 'select') we use 'depends on' here, otherwise
the X.org server will be get selected automatically without the user
noticing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Two variants of the ncurses library exist: the normal one, and the
ncursesw one, which has support for wide char. Currently, Buildroot
only builds the normal variant (the second variant requires
--enable-widec while compiling ncurses).
Unfortunately, when libncursesw is installed on the host, the
configure script of alsa-utils finds /usr/bin/ncursesw5-config and
thinks that the target has this version. Unfortunately, as this is not
the case, it causes a configure failure when trying to link a sample
program against libpanelw (which is part of ncurses).
Therefore, we force the libncurses variant used by alsa-utils to the
normal variant.
Later on, if needed, support for the wide-char variant of the
libncurses library could be added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this patch alsamixer complains about missing libs and
ldd says:
libform.so.5 => not found
libmenu.so.5 => not found
libpanel.so.5 => not found
libncurses.so.5 => /usr/lib/libncurses.so.5 (0x4000e000)
libasound.so.2 => /usr/lib/libasound.so.2 (0x40056000)
... <cut>
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The rule to copy the resulting binary file into the binary directory had
a typo in the line continuation character that results in a spurious error
message being produced.
Signed-off-by: Rob Alley <Rob.Alley@navmanwireless.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise, even if speex is selected, as gstreamer is compiled first,
speex plugin is not activated/built.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
rsync source repository has moved (?).
Bump version while we are at it.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sets THIS_MINOR to 0 if not valid, ie when processing a Linux config file
which does not have a minor number extension;
ex: "<name>-linux-2.6.<major>.config"
Otherwise bash is raising an error/exception (line 59) and script can not
complete.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current version of alsa-lib (1.0.22) does not build when
--disable-pcm is used at configure time. I've reported the issue at
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4913.
In the mean time, we can prevent the user from not selecting PCM
support by using the following patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version of TCL is bumped from 8.4.9 to 8.4.19, which fixes the
build breakage reported by Maxime Ripard <maxime.ripard@anandra.org>
on January, 6th, 2010.
The tcl-strtod patch is kept since it is still needed, the two other
patches are no longer useful.
At the same time, the package is converted to the autotools
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The .pc file of TrapProto says that it depends on xt, even through it
doesn't depend on it at compile time. However, if xt isn't present
when TrapProto has been installed, the compilation of Xserver fails
telling that there is a missing dependency in TrapProto on Xt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When packages using gtk-doc are autoreconfigured, aclocal complains
because it cannot find the macros defined in gtk-doc.m4. We could
compile the gtk-doc package for the host, but it depends on
gnome-doc-utils, which depends on libxml2, libxslt, and other packages
as well.
Since we don't care about the documentation, all is needed is in fact
the gtk-doc.m4, so that the configure script can be generated, and we
can use the --disable-gtk-doc to not generate the documentation.
To solve this, we include a gtk-doc.m4 file in package/automake/, and
it gets installed in $(STAGING_DIR)/usr/share/aclocal/ during the
installation of the host automake (used for autoreconfiguration of
packages).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes the undefined reference to `__iconv_codesets'
reported at
http://www.mail-archive.com/uclibc@uclibc.org/msg04970.html. The patch
has been taken from the upstream Git repository, and will be part of
uClibc 0.9.30.3. In the mean time, let's integrate it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch that makes sure config.h gets included in a file that uses
some of the NEEDS_* macros. The yywrap() function was missing when
flex was not available on the target, even though this configuration
is supposed to be supported by at (and handled by NEEDS_YYWRAP).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch that includes pcap.h instead of hardcoding an incorrect
prototype for a function provided by libpcap.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the build of libcap, with external toolchain, when it is
the first package being built.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create tarballs with git-archive so we're sure they don't contain
anything not in git (E.G. local backup configs).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
