Add support to compile Xen 4.6 and Xen tools for arm32 and arm64
targets.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas:
- Remove all "select" from the main Xen option, since the hypervisor
can build fine without any additional library. The dependencies have
been moved to the "tools" sub-option.
- Make sure that at least one of the sub-option is enabled by selecting
the hypervisor sub-option if the tools sub-option is not enabled.
- Add a Config.in comment about the dependencies of the Xen tools.
- Add missing dependency on argp-standalone in the .mk file.
- Simplify the handling of XEN_INSTALL_TARGET_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A Linux user-space application to modify the Intel Extensible Firmware
Interface (EFI) Boot Manager. This application can create and destroy
boot entries, change the boot order, change the next running boot
option, and more.
The only issue found was that it was trying to include headers from the
host, so $(STAGING_DIR) has been prepended to the include path so that
the package finds the right headers.
efibootmgr depends on the libraries provided by efivar.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
- change the "depends on" for efivar to a "select", and propagate the
relevant dependencies.
- the license is GPLv2+, not GPLv2.
- move the Makefile tweak to a post-patch hook rather than doing it as
part of the build step.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar contains tools and libraries to manipulate EFI variables.
This package has some restrictions to build. It needs uchar.h which
apparently does not come in uClibc, and it also needs
__bswap_constant_*() definitions which are only present in glibc.
So, this package was limited to build with glibc toolchains.
Although it probably makes sense mostly on x86, x86-64 and aarch64
architectures, there are no architecture specific limitations which
would prevent it to build for other architectures, so this restriction
was not imposed. This package has been build-tested additionaly on many
architectures which support glibc, such as mips, MicroBlaze, sparc64,
ppc64. There were some build flag issues found when building to some of
these some architectures, although the flags can be also added in the
general case, so they were added by default.
It has also been found that in some host systems it failed to build due
to not generating the .pc files. This has been tracked to the use of
make 3.81, so a patch was prepared for it and was submitted upstream.
There's also a dependency on the linux/nvme.h header, which is somewhat
conturbed, as it has appeared in user space linux headers 3.12 and in
4.4 it was renamed. This has been solved by restricting it to build with
linux headers >= 3.12 and a patch from upstream was picked which fixes
it for linux headers >= 4.4.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
- Pass TARGET_LDFLAGS in LDFLAGS.
- Pass -shared-libgcc only on Microblaze.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Domoticz is a Home Automation System that lets you monitor and
configure various devices like: Lights, Switches, various
sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water
and much more. Notifications/Alerts can be sent to any mobile device.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Damien Lanson <damien@kal-host.com>
[Thomas:
- Rewrap Config.in help text.
- Add missing new line at the end of the Config.in help text.
- Use 80 # signs for the .mk file header.
- Use <pkg>_SUBDIR = log4cpp instead of moving things around during the
extract step.
- Fix typo in the license (it's LGPL, not GLPL), and make it LGPLv2.1+,
since it's what the HTML documentation says.
- In addition to removing the log4cpp-config script from the target,
tweak the variant installed in staging so that it behaves properly
for cross-compilation. Unfortunately, the <pkg>_CONFIG_SCRIPTS
generic mechanism doesn't work for this config script.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- disable the tracing mechanism using --disable-vt, since it was
causing the build failure. Avoids the need for a patch.
- remove the option to pass arbitrary config options.
- specify the license as being BSD-3c instead of just BSD.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
[Thomas:
- Adjust license: it is "GPLv2+ or BSD-2c" and not "GPLv2, BSD-2c"
- Add the COPYING file to the license files, since it indicates
explictly that the license is GPLv2+ or BSD-2c.
- Remove the --with-shared configure options, which doesn't exist.
- Use LIBCOAP_AUTORECONF = YES instead of calling the autogen.sh script
manually.
- Add patch to fix build with old gcc versions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only enabled on a subset of known-working architectures.
It fails to build on some archs, like blackfin.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- Add comment about the Blackfin exception.
- Propagate the Blackfin exception to the Config.in comment.
- Fix the license, it is the LGPLv2.1+ *with* the unRAR restriction.
- Use $(INSTALL) -D -m 0755 to install the binary instead of cp.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OMXplayer uses openMAX on the RPi to play videos with hardware
acceleration.
Compared to using a gstreamer pipe, OMXplayer uses a complete
"tunnel-mode", in which the video is piped (after demuxing) into the
hardware, all the way down to the display, whereas gstreamer composes
the video using the eglgles sink, which uses mem-to-mem copies.
So, when playing a locally-stored 1080p video, OMXplayer averages 20%
(with peaks up to ~30%, depending on the complexity of the video) CPU,
while gstreamer bursts up to 40+% when playing 720p and totally chokes
on a 1080p video; all on an non-overclocked RPi-1.
Note that we have to depend on rpi-userland. rpi-userland is a GLES/EGL
provider, so it can't be selected (as all providers of a virtual package
can't).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add a depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Free software library that interfaces with selected Z-Wave PC
controllers, allowing anyone to create applications that manipulate and
respond to devices on a Z-Wave network, without requiring in-depth
knowledge of the Z-Wave protocol
[Peter: also pass DOXYGEN=, add _MAKE_OPTS and use for build+install]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package introduces batman-adv, a kernel module implementation of
the B.A.T.M.A.N. IV and V mesh network routing protocols.
While batman-adv exists in the mainline kernel tree, it can also be
built as an external out-of-tree module. This package adds the
flexibility to chose a more up to date version of the module than exists
in the official tree, and also allows for compilation against kernels
without batman-adv in-tree support.
https://www.open-mesh.org/projects/batman-adv/
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas:
- remove "default n", since it's the default
- fix indentation of Config.in help text
- license is GPLv2, not just GPL
- remove variable BATMAN_ADV_MAKE_OPTS, name it directly
BATMAN_ADV_MODULE_MAKE_OPTS as this is what is expected by the kernel
module infrastructure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: use complete license name in <pkg>_LICENSE, i.e "VOSTROM Public
License for Open Source".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- make python-flask a runtime dependency only, as noticed by Yegor
Yefremov.
- use setup.py as the license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the latest 2.12.x upstream stable branch.
Both 2.4.x and 2.12.x can live side-by-side, however only the latest
stable branch/releases are security-maintained, so add it unslotted.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package allows to build the fastboot and adb host utilities,
which can be used to interact with target devices implementing one of
these protocols.
The work behind the host utilities was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
The package also allows to build fastboot, adb and adbd daemon for the
target.
Regarding adbd, the target is required to have the FunctionFS USB Gadget
configuration. Then the following commands enable the use of adb:
# modprobe g_ffs idVendor=0x18d1 idProduct=0x4e42 \
iSerialNumber="buildroot"
# mkdir -p /dev/usb-ffs/adb
# mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
# adbd &
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- update on top of master.
- fix Config.in.host prompt, it should have been "host android-tools"
and not just "android-tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libusbgx is a C library encapsulating the kernel USB gadget-configfs
userspace API functionality.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas: adjust license information, there are included examples that
are installed by default, licensed under GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"A better i7 (and now i3, i5) reporting tool for Linux."
i7z can print out the C-states and temperature for i3, i5 and i7 based
Core processors from Intel (including Nehalems, Sandy Bridge and Ivy
Bridge).
https://github.com/ajaiantilal/i7z
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flannel is a virtual network that gives a subnet to each host for use
with container runtimes.
Cc: Brandon Philips <brandon.philips@coreos.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Don't select BR2_PACKAGE_HOST_GO since this option was removed.
- Take into account the rename of BR2_PACKAGE_GO_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS.
- Rewrap Config.in help text, it was slightly too large.
- Don't use the github function (the link was anyway incorrect), but
instead a direct link to the tarball, since the tarballs are
uploaded by the maintainers.
- Update the hash accordingly.
- Use $() to reference make variables and not ${}.
- Call the go compiler from $(HOST_DIR)/usr/bin, rather than from
HOST_GO_ROOT.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds freeswitch without any configured modules and with a
minimal set of non-optional dependencies. All other dependencies and
modules will be added by further patches in this series.
Please note that freeswitch source repo bundles some libraries which
are also available as buildroot packages. The freeswitch build system
does not allow to use system libraries in these cases:
apr, apr-util, libsrtp, libvpx, libyuv, sofia-sip, tiff
The reason are patches to these packages by the freeswitch project
which are not yet upstream. There is an open JIRA report for this
situation:
https://freeswitch.org/jira/si/jira.issueviews:issue-html/FS-353/FS-353.html
More historic infos can be found here:
http://article.gmane.org/gmane.comp.telephony.freeswitch.devel/2715https://freeswitch.org/the-missing-link/
In the 1.6.7 version bump libvpx & libyuv were also moved in-tree:
febe0f8dac44da905b4f
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
add python to MySQL connection software, written in pure python
Signed-off-by: Steve Calfee <stevecalfee@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
