flake8 complains with:
support/scripts/pkg-stats:339:13: E722 do not use bare 'except'
Due to the construct:
try:
something
except:
print("some message")
raise
Which is in fact OK because the exception is re-raised. This issue is
discussed at https://github.com/PyCQA/pycodestyle/issues/703, and the
general agreement is that these "bare except" are OK, and should be
ignored from flake8 using a noqa statement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
flake8 complains with:
pkg-stats:38:1: E402 module level import not at top of file
This is due to sys.path.append() being before the import from
getdeveloperlib, but we really need this sys.path.append() to be
before, so let's ignore this flake8 warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The C program inside check-kernel-headers.sh has two checking mode: a
strict and a loose one.
In strict mode, we want the kernel headers version declared by the
user to match exactly the one of the toolchain.
In loose mode, we want the kernel headers version of the toolchain to
be greater than or equal to the one declared by the user: this is used
when we have a toolchain that has newer headers than the latest
version known by Buildroot.
However, in loose mode, we continue to show the "Incorrect kernel
headers version" message, even though we then return a zero error
code. This is very confusing: you see an error displayed on the
terminal, but the build goes on.
We fix that by first doing the loose check first, and returning 0 if
it succeeds. And then we move on with the strict check where we want
the version to be identical.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If there is no infra set or infra is virtual the status is set to 'na'.
This is done for the follwing checks:
- license
- license-files
- hash
- hash-license
- patches
- version
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This value can be used for later processing.
In the buildroot-stats application this is used to create links pointing
to the git repo of buildroot.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unify the status check information. The status is stored in a tuple. The
first entry is the status that can be 'ok', 'warning' or 'error'. The
second entry is a verbose message.
The following checks are performed:
- url: status of the URL check
- license: status of the license presence check
- license-files: status of the license file check
- hash: status of the hash file presence check
- patches: status of the patches count check
- pkg-check: status of the check-package script result
- developers: status if a package has developers in the DEVELOPERS file
- version: status of the version check
With that status information the following variables are replaced:
has_license, has_license_files, has_hash, url_status
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the function 'parse_developers' function from getdeveloperlib that
collect the information about the developers and the files they
maintain. Then set the maintainer(s) to each package.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove the patch_count attribute and use a class property instead.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch changes the type of the latest_version variable to a dict.
This is for better readability/usability of the data. With this the json
output is more descriptive in later processing of the json output.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the CVE checking phase, we can still see a huge amount of
Python processes (actually 128) running on the host, even though
the CVE step is entirely ran in the main thread.
These are actually the worker processes spawned to check for the
packages URL statuses and the latest versions from release-monitoring.
This is because of an issue in Python's multiprocessing implementation:
https://bugs.python.org/issue34172
The problem was already there before the CVE matching step was
introduced, but because pkg-stat was terminating right after the
release-monitoring step, it went unnoticed.
Also, do not hold a reference to the multiprocessing pool from
the Package class, as this is not needed.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Python 3, the functions from the subprocess module return bytes
(and no longer strings as in Python 2), which must be decoded for
further text operations.
Now, pkg-stats can be run in Python 3.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems like throughout the series that the CVE pkg-stats support
went through, the support for ignoring CVEs in the per-package
<pkg>_IGNORE_CVES variable was forgotten.
Let's re-introduce this, which is now very simple thanks to the CVE
class, its .identifier() propertly and the .is_cve_ignored() method of
the Package class
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During the CVE checking phase, we can still see a huge amount of
Python processes (actually 128) running on the host, even though
the CVE step is entirely ran in the main thread.
These are actually the worker processes spawned to check for the
packages URL statuses and the latest versions from release-monitoring.
This is because of an issue in Python's multiprocessing implementation:
https://bugs.python.org/issue34172
The problem was already there before the CVE matching step was
introduced, but because pkg-stat was terminating right after the
release-monitoring step, it went unnoticed.
Also, do not hold a reference to the multiprocessing pool from
the Package class, as this is not needed.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Python 3, the functions from the subprocess module return bytes
(and no longer strings as in Python 2), which must be decoded for
further text operations.
Now, pkg-stats can be run in Python 3.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The NVD files that are used to build the list of CVEs affecting
Buildroot packages are quite large (a few hundreds MB of json),
and cause the pkg-stats scripts to have a huge memory footprint
(a few GB with Python 2.7).
However, because we only need to iterate on CVE items one by one,
we can process them in streaming (ie decoding one CVE at a time
from the JSON representation). Because the json module from the
python standard library does not support such a mode of operation,
we switch to the third-party package ijson, which is compatible
with both Python 2 and Python3.
To run the script with these modifications, one should install
the ijson python package. This can be done with pip:
`pip install ijson`. On Debian based distributions, this can
also be done with the apt package manager:
`apt install python-ijson`.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The NVD files that are used to build the list of CVEs affecting
Buildroot packages are quite large (a few hundreds MB of json),
and cause the pkg-stats scripts to have a huge memory footprint
(a few GB with Python 2.7).
However, because we only need to iterate on CVE items one by one,
we can process them in streaming (ie decoding one CVE at a time
from the JSON representation). Because the json module from the
python standard library does not support such a mode of operation,
we switch to the third-party package ijson, which is compatible
with both Python 2 and Python3.
To run the script with these modifications, one should install
the ijson python package. This can be done with pip:
`pip install ijson`. On Debian based distributions, this can
also be done with the apt package manager:
`apt install python-ijson`.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems like throughout the series that the CVE pkg-stats support
went through, the support for ignoring CVEs in the per-package
<pkg>_IGNORE_CVES variable was forgotten.
Let's re-introduce this, which is now very simple thanks to the CVE
class, its .identifier() propertly and the .is_cve_ignored() method of
the Package class
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit extends the pkg-stats script to grab information about the
CVEs affecting the Buildroot packages.
To do so, it downloads the NVD database from
https://nvd.nist.gov/vuln/data-feeds in JSON format, and processes the
JSON file to determine which of our packages is affected by which
CVE. The information is then displayed in both the HTML output and the
JSON output of pkg-stats.
To use this feature, you have to pass the new --nvd-path option,
pointing to a writable directory where pkg-stats will store the NVD
database. If the local database is less than 24 hours old, it will not
re-download it. If it is more than 24 hours old, it will re-download
only the files that have really been updated by upstream NVD.
Packages can use the newly introduced <pkg>_IGNORE_CVES variable to
tell pkg-stats that some CVEs should be ignored: it can be because a
patch we have is fixing the CVE, or because the CVE doesn't apply in
our case.
>From an implementation point of view:
- A new class CVE implement most of the required functionalities:
- Downloading the yearly NVD files
- Reading and extracting relevant data from these files
- Matching Packages against a CVE
- The statistics are extended with the total number of CVEs, and the
total number of packages that have at least one CVE pending.
- The HTML output is extended with these new details. There are no
changes to the code generating the JSON output because the existing
code is smart enough to automatically expose the new information.
This development is a collective effort with Titouan Christophe
<titouan.christophe@railnova.eu> and Thomas De Schampheleire
<thomas.de_schampheleire@nokia.com>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most, but not all our C code follows the Linux kernel code style (as
documented in Documentation/process/coding-style.rst). Adjust the few
places doing differently:
- Braces:
..but the preferred way, as shown to us by the prophets Kernighan
and Ritchie, is to put the opening brace last on the line
- Spaces after keywords:
Use a space after (most) keywords
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When Buildroot is released, it knows up to a certain kernel header
version, and no later. However, it is possible that an external
toolchain will be used, that uses headers newer than the latest version
Buildroot knows about.
This may also happen when testing a development, an rc-class, or a newly
released kernel, either in an external toolchain, or with an internal
toolchain with custom headers (same-as-kernel, custom version, custom
git, custom tarball).
In the current state, Buildroot would refuse to use such toolchains,
because the test is for strict equality.
We'd like to make that situation possible, but we also want the user not
to be lenient at the same time, and select the right headers version
when it is known.
So, we add a new Kconfig blind option that the latest kernel headers
version selects. This options is then used to decide whether we do a
strict or loose check of the kernel headers.
Suggested-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- only do a loose check for the latest version
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit c4e6d5c8be ("core: implement
per-package SDK and target") had a mistake on the regexp that is used
to match $(PER_PACKAGE_DIR)/<something>/, and due to this, the regexp
was never matched.
The + sign in [^/]+ which was suggested by Yann E. Morin during the
review of the per-package patch series (instead of [^/]*) needs to be
escaped to be taken into account correctly. Without this, the regexp
doesn't match, and the replacement is not done, causing:
(1) For the libtool fixup in pkg-generic.mk, the lack of replacement
causes libtool .la files to not be tweaked as expected, which it
turn causes build failures reported by the autobuilder.
(2) For the fix-rpath, the RPATH of host binaries in the SDK were not
correct.
Interestingly, we have the same regexp in
support/scripts/check-host-rpath, but here the + sign does not need to
be escaped.
Fixes:
http://autobuild.buildroot.net/results/d4d996f3923699e266afd40cc7180de0f7257d99/ (libsvg-cairo)
http://autobuild.buildroot.net/results/56330f86872f67a2ce328e09b4c7b12aa835a432/ (bind)
http://autobuild.buildroot.net/results/9e0fc42d2c9f856b92954b08019b83ce668ef289/ (ibrcommon)
and probably a number of other similar issues
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit implements the core of the move to per-package SDK and
target directories. The main idea is that instead of having a global
output/host and output/target in which all packages install files, we
switch to per-package host and target directories, that only contain
their explicit dependencies.
There are two main benefits:
- Packages will now see only the dependencies they explicitly list in
their <pkg>_DEPENDENCIES variable, and the recursive dependencies
thereof.
- We can support top-level parallel build properly, because a package
only "sees" its own host directory and target directory, isolated
from the build of other packages that can happen in parallel.
It works as follows:
- A new output/per-package/ directory is created, which will contain
one sub-directory per package, and inside it, a "host" directory
and a "target" directory:
output/per-package/busybox/target
output/per-package/busybox/host
output/per-package/host-fakeroot/target
output/per-package/host-fakeroot/host
This output/per-package/ directory is PER_PACKAGE_DIR.
- The global TARGET_DIR and HOST_DIR variable now automatically point
to the per-package directory when PKG is defined. So whenever a
package references $(HOST_DIR) or $(TARGET_DIR) in its build
process, it effectively references the per-package host/target
directories. Note that STAGING_DIR is a sub-dir of HOST_DIR, so it
is handled as well.
- Of course, packages have dependencies, so those dependencies must
be installed in the per-package host and target directories. To do
so, we simply rsync (using hard links to save space and time) the
host and target directories of the direct dependencies of the
package to the current package host and target directories.
We only need to take care of direct dependencies (and not
recursively all dependencies), because we accumulate into those
per-package host and target directories the files installed by the
dependencies. Note that this only works because we make the
assumption that one package does *not* overwrite files installed by
another package.
This is done for "extract dependencies" at the beginning of the
extract step, and for "normal dependencies" at the beginning of the
configure step.
This is basically enough to make per-package SDK and target work. The
only gotcha is that at the end of the build, output/target and
output/host are empty, which means that:
- The filesystem image creation code cannot work.
- We don't have a SDK to build code outside of Buildroot.
In order to fix this, this commit extends the target-finalize step so
that it starts by populating output/target and output/host by
rsync-ing into them the target and host directories of all packages
listed in the $(PACKAGES) variable. It is necessary to do this
sequentially in the target-finalize step and not in each
package. Doing it in package installation means that it can be done in
parallel. In that case, there is a chance that two rsyncs are creating
the same hardlink or directory at the same time, which makes one of
them fail.
This change to per-package directories has an impact on the RPATH
built into the host binaries, as those RPATH now point to various
per-package host directories, and no longer to the global host
directory. We do not try to rewrite such RPATHs during the build as
having such RPATHs is perfectly fine, but we still need to handle two
fallouts from this change:
- The check-host-rpath script, which verifies at the end of each
package installation that it has the appropriate RPATH, is modified
to understand that a RPATH to $(PER_PACKAGE_DIR)/<pkg>/host/lib is
a correct RPAT.
- The fix-rpath script, which mungles the RPATH mainly for the SDK
preparation, is modified to rewrite the RPATH to not point to
per-package directories. Indeed the patchelf --make-rpath-relative
call only works if the RPATH points to the ROOTDIR passed as
argument, and this ROOTDIR is the global host directory. Rewriting
the RPATH to not point to per-package host directories prior to
this is an easy solution to this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
genimage makes a full copy of the given rootpath to ${GENIMAGE_TMP}/root
so passing TARGET_DIR would be a waste of time and disk space. We don't
rely on genimage to build the rootfs image, just to insert a pre-built
one in the disk image.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back a few years ago, when we were starting to think about top-level
parallel build, we were not sure how to deal with packages that
installed the same files, so we wanted to catch the situation to assess
how prevalent that was, before we decided what to do and how to address
it.
However, the trend nowadays is that packages will install in a
per-package target/ (and staging/ and host/), and the final directories
will be assembled in a reproducible (alphabetical) order, so if two
packages install the same file, the last one will win (as is currently
the case).
Besides, check-uniq-files reports loads of spurious errors when packages
get reinstalled (e.g. during development).
Finally, check-uniq-files is the only script called during the build,
that is written in python.
So, get rid of check-uniq-files.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When selected, host-ccache is a dependency of almost all packages.
As such, it clutters the dependency graph uselessly.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The POSIX specification defines a 'trap <action> EXIT' mechanism that is
useful to perform clean-up actions in shell scripts. A trap has two main
advantages over hand-crafted clean-up mechanisms:
- It runs even if the process is terminated by a SIGTERM.
- It runs even if the script stops due to a pipeline failure (set -e).
Now we can make the script to stop immediately if a compilation error
occurs, instead of letting it try to run an unexisting program.
This change may appear to be overkill but Buildroot is an open source
project and each piece of code is a potential learning tool for other
developments. We must strive to provide good examples.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Acked-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some installations mount /tmp with the 'noexec' option, which prevents
running the program generated there to check the kernel headers.
Avoid the problem by generating the program under $(BUILD_DIR), passed
as the first argument to check-kernel-headers.sh.
We could globally export a TMPDIR environment variable with some path
under $(BUILD_DIR) but such solution would be too intrusive, depriving
the user from the freedom to set TMPDIR at his will (or needs).
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12241
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As suggested by Baruch Siach, using "git rev-parse HEAD" is a lot
simpler than playing around with "git log" to just retrieve the commit
id corresponding to the current HEAD.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkg-stats extracts the Buildroot commit id from which the package
information was collected. However, when doing so, it always assumes
we're using the master branch, by running "git log master".
But in fact, pkg-stats can be run from any branch/tag, so it makes a
lot more sense to use "git log HEAD".
Cc: victor.huesca@bootlin.com
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we can order packages from biggest to smallest, it makes sense
to assign the most aggressive colours to the biggest packages.
As such, reorder the current colours so that we have, in order:
- red-ish
- orange-ish
- yellow-ish
- purple-ish
- eggplant-ish (is that even a colour? :-] )
- some-indeterminate-blue-ish
- dark-green-ish
- light-green-ish
For the previous, smallest-first ordering, it does not matter much what
the ordering is: the actual colours are still somewhat-unpredictably
assigned to packages, depending on the cut-off limit...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the packages are sorted smallest first, and biggest last
(with unknown and others second-to-last and last, resp.).
Add an option to invert the ordering (but keeping unknown and others at
their current positions).
This has the nice side effect that we can now control the colours
assigned to the biggest package(s), as the colours are cycled from the
first to the last. Currently, the biggest packages gets a redish colour,
which is appropriate, but the second gets a greenish one, which is not
as appropriate (but changing that can come later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When dealing with embedded devices, storage is more often than not some
kind of flash device, on which the memory is usually counted as powers
of 1024 instead of powers of 1000. As such, people may prefer reports
using IEC prefixes [0] instead of the SI prefixes.
Add an option to that effect.
We use argparse's ability to use custom actions [1] [2], to provide a
set of options that act on a boolean, but has a single help entry and
internally ensures consistency of the settings. We could have been using
the more conventional store_true/store_false actions instead, but that
would have meant either two help entries, one for each set of options,
and/or some logic after parse_args() to check the validity of the
settings.
[0] https://en.wikipedia.org/wiki/Binary_prefix
[1] https://docs.python.org/2/library/argparse.html#action
[2] https://docs.python.org/2/library/argparse.html#argparse.Action
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we group packages that contribute less then 1%, into the
"Other" category.
However, in some cases, there can be a lot of very comparatively small
packages, and they may not exceed this limit, and so only the "Others"
category would be displayed, which is not nice.
Conversely, if there are a lot of packages, most of which only so
slightly exceeding this limit, then we get all of them in the graph,
which is not nice either.
Add a way for the developers to pass a different cut-off limit. As for
the dependency graph which has BR2_GRAPH_DEPS_OPTS, add the environment
variable BR2_GRAPH_SIZE_OPTS to carry those extra option (in preparation
for more to come, later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Arnout:
- remove empty base class definition from Config;
- use parser.error instead of ValueError for invalid argument.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we forcibly report sizes in multiple of Kilobytes. In some
big configurations, the sizes of the system as a whole, as well as that
of individual packages, may exceed megabytes, and when some artistic
assets get used, even the gigabyte may get exceed.
These big sizes are not easy to read when expressed in kilobytes.
Additionally, some very small packages might have sizes below the
kilobyte (and when we can specify the cut-off grouping size, they may
get reported), and thus the size displayed for those would be 0 kB.
Add a helper function that can format a floating-point size into a
string with all the appropriate formatting:
- there are at least 3 meaningfull digits visible, i.e. we display
"3.14" or "10.4" instead of just "3" or "10", but for big number we
don't care about too many precision either, so we report "100" or
"1000", not "100.42" or "1000.27";
- the proper SI prefix is appended, if needed.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the "unknown" category may be reported anywhere, so it does
not really stand out when there are a lot of packages in the graph.
Move it towards the end, but right before the "other" category, so that
it is a bit more visible. Like for Others, don't report it if its size
is zero.
Also, make it title case (i.e. "Unknown" instead of "unknown").
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It is nicer overall to have a main() function, like all our other
scripts tend to have too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There are three E501 warnings returned by flake8, when run locally,
because we enforce a local 80-char limit, but that are not reported by
the gitlab-ci jobs because only a 132-char limit is required there.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Similar to toolchains and jpeg, we now offer a way for br2-external
trees to provide their openssl implementation, which gets included in
the openssl choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to toolchains, we now offer a way for br2-external trees to
provide their libjpeg implementation, which gets included in the jpeg
choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we have a choice for the pre-configured pre-built toolchains,
there is no possbility for a br2-external to provide its own. The
only solution so far for defconfigs in br2-external trees is to use
BR2_TOOLCHAIN_EXTERNAL_CUSTOM and define all the bits by itself...
This is not so convemient, so offer a way for br2-external trees to
provide such pre-configured toolchains.
To allow for this, we now scan each br2-external tree and look for a
specific file, provides.toolchains.in. We generate a kconfig file that
sources each such file, and that generated file is sourced from within
the toolchain choice, thus making the toolchains from a br2-external
tree possible and available in the same location as the ones known to
Buildroot:
Toolchain --->
Toolchain type (External toolchain) --->
Toolchain --->
(X) Arm ARM 2019.03
( ) Linaro ARM 2018.05
( ) Custom toolchain
*** Toolchains from my-br2-ext-tree: ***
( ) My custom ARM toolchain
*** Toolchains from another-br2-ext-tree: ***
( ) Another custom ARM toolchain
( ) A third custom ARM toolchain
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the kconfig part contains two things: the kconfig option
with the paths to br2-external trees, and the kconfig menus for the
br2-external trees.
When we want to include more kconfig files from the br2-external tree
(e.g. to get definitions for pre-built toolchains), we will need to
have the paths defined earlier, so they can be used from the br2-external
tree to include files earlier than the existing menus.
Split the generated kconfig file in two: one to define the paths, which
gets included early in our main Config.in, and one to actually define
the existing menus, which still gets included at the same place they
currently are.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
