Bump U-boot version to 2015.07 from the mainline repository. Since there
is SPL support for the wandboard in the U-boot 2015.07, it is now
possible to boot the same U-boot image for all wandboard variants
(solo/dual/quad).
Bump kernel version to 3.14.28_1.0.0 from the wandboard git repository.
Tested on Wandboard Solo, Wandboard Dual and Wandboard Quad.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the upgrade to pkgconf 0.9.12 all directories and variables with
directories are sysroot-prefixed, whereas with the old patch only some
variables were (includedir, mapdir, sdkdir, libdir).
libglib2 uses a giomoduledir=${libdir}/gio/modules variable in
gio-2.0.pc, which when expanded via sysroot by pkgconf at configure time
points to the staging directory (via libdir expansion).
When target install gets called the gio module gets installed to staging
rather than target, with the obvious consequences this has.
Work-around this pkgconfig abuse by overriding GIO_MODULE_DIR at target
install time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2015-4491 already fixed in the release so drop patch.
Fixes a heap overflow with a gif file and a heap overflow and DoS with a
tga file. CVEs not assigned yet.
Tests disabled since they fail to build properly on uClibc toolchains.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It turns out that uClibc only enables the long double math functions
for some architectures (god know why, so what if long double is the
same as double, these functions should still be defined). Since
python-numpy links with those functions, the module will fail to load
on ARM, MIPS and SH.
However, python-numpy actually checks for each function if it is really
available. Only, it overrides that check for ldexpl and frexpl when
long double is the same as double (i.e. in exactly the case the uClibc
doesn't have these functions).
So add another exception for this.
Upstream-status: not applicable (code has changed too much)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Probably a leftover from our last fs infra reworking a couple of years
ago.
Incidentally, also added a newline at the end of the file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches, they aren't required any more.
It fixes a bug where inline comments cause issues, like:
Libs: -lblah # -lbleh
...it would make pkgconf search for the '#' package
This is required for the nettle 3.1.1 upgrade since howgeed.pc adjusts
Libs according to static/dynamic builds using the comment feature.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
API is now compatible with nettle 2.7.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On aarch64, the image name is always Image, so let's add support for
that.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
defconfigs that use U-Boot 2015.07 need host-dtc to build
properly.
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zlib isn't optional even though it seems like it, fixes build failure
such as:
log.cc:51:18: fatal error: zlib.h: No such file or directory
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsigc isn't used/needed any longer so drop it.
And switch to the proper homepage rather than the tarball repository.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsigc isn't used/needed any longer so drop it.
And switch to the proper homepage rather than the tarball repository.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#8386
We should check if BR_CROSS_PATH_ABS is defined, not if it evalutates to
true for the pre processor.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump to version 0.9.6
- Add a hash file.
- Change the website URL to the new official one.
- Tweak the 0001-cross_compile.patch for the new version.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Bump to version 0.13.6.
- Add a hash file.
- Change the website URL to the new official one.
- Help the build system to find the zlib headers, otherwise the
configure script will fail like this:
checking if zlib is wanted... yes
checking for inflateEnd in -lz... no
checking zlib.h usability... no
checking zlib.h presence... no
checking for zlib.h... no
configure: error: either specify a valid zlib installation with
--with-zlib=DIR or disable zlib usage with --without-zlib
- Disable instrumentation support by default since it avoids runtime
failures on rtorrent for some architectures like MIPS, PowerPC or ARM:
https://github.com/rakshasa/rtorrent/issues/156
- Tweak the 0001-cross_compile.patch for this new version.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(wildcard ...) in make doesn't sort the files, so the order of the
hashed files is not predictable. Therefore, the ccache hash could
change from one build to another. We don't want that, so sort the
files explicitly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
olimex_a20_olinuxino_lime_defconfig and zedboard_defconfig use U-Boot
2015.07, and they need host-dtc to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some U-Boot configurations require the Device Tree compiler to be
available, so we need to depend on host-dtc (example configuration:
zynq_zed).
However, we don't want to build it unconditionally, since the vast
majority of U-Boot configurations don't need it (and host-dtc itself
has a bunch of dependencies).
So, we simply add a Config.in option that allows users to indicate
whether their U-Boot needs DTC or not, and depend on host-dtc if this
option is enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Having a host variant of dtc is needed for example for U-Boot, which
uses the Device Tree for a number of platforms.
In addition, now that we have a proper host-dtc package, it is no
longer needed for the linux package to install the host dtc compiler:
users interested in having the host dtc compiler can simply enable
this package.
A Config.in.host option is added to build host-dtc, because the
initial reason why the host DTC built by the kernel was installed in
$(HOST_DIR)/usr/bin (commit 707d44d0a2
from Thomas DS) was:
Having dtc as a host tool can be useful for users that have a
custom boot scenario where the device tree is not embedded in the
kernel.
[Thomas:
- rework the commit log.]
[Peter: keep the (renamed) linux version]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So it doesn't conflict with host-dtc. The Linux kernel version may be a
patched version supporting E.G. overlays.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_PORTAUDIO_ALSA is misspelled in one place, resulting in
alsa-lib not being listed in the dependencies.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those two comments:
- are exactly the same
- have the same dependencies (except for arm/armeb)
So, make it a common comment. It will be useful to have that comment
when we introduce new Linaro toolchain versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Barebox, AT91Bootstrap and Linux patches for the Calao QIL A9260
board are all located in the same directory, board/calao/qil-a9260/,
with only a prefix to indicate to which component they apply.
Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR for all of Barebox, AT91Bootstrap and Linux
patches.
In addition, the defconfig was not specifying explicitly which Barebox
version to use, so right now it's trying to use Barebox 2015.09, on
which the board-specific patch does not apply. So we've forced to use
Barebox 2012.08, which was the lastest release available at the time
the defconfig was initially contributed.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Both the Barebox and AT91Bootstrap patches for the Calao USB A9G20
board are located in the same directory, board/calao/usb-a9g20-lpw/,
with only a prefix making a difference between whether they apply to
Barebox or AT91Bootstrap.
Unfortunately, since commit 0eba4759fa
("packages: apply custom patches using *.patch instead of
<pkg>-*.patch"), the logic to apply custom patches in Barebox and
AT91Bootstrap has been changed from applying <package>-*.patch to
applying *.patch (in order to be consistent with what we do for all
packages in Buildroot).
However, this had the effect of trying to apply both the AT91Bootstrap
and Barebox patches on both packages, which obviously cannot work.
This commit fixes that by moving patches around, and switching to use
BR2_GLOBAL_PATCH_DIR.
Cc: Gregory Hermant <gregory.hermant@calao-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to fetch its kernel source code and U-Boot source
code from gitorious.org, which is not longer available. Therefore,
this defconfig has been failing to build since quite some time. Since
there's no obvious other place to grab the kernel and u-boot source
code, and the defconfig was not updated since a long time, let's
simply get rid of it.
[Peter: also drop README]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit b0f025386f a patch was added
to make sure that python-numpy does work in uClibc. This patch was
needed for the x86 architecture, because uClibc in fact does support
fenv for x86. However, we don't turn on this support in our uClibc
config. Because the Config.in depends still allowed uClibc for x86,
this lead to a built failure, which lead to the fix in commit b0f02538.
But since this fix also fixes it for all other (supported)
architectures, we can just remove the !uClibc dependency completely.
This is also propagated to the reverse dependency in opencv3.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nfs-utils has been patched to install only the needed systemd unit files
supported.
Also tmpfiles was needed because the folder /run/nfs is a tmpfs
and nfs-utils need some files to be there to work correctly.
Signed-off-by: Aurélien Chabot <aurelien@chabot.fr>
[Maxime: Remove patches included originally in the patch as they have
have been merged upstream in v1.3.3]
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas:
- add comment in nfs-utils_env.sh to explain why an empty script is
needed.
- remove incorrect indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lz4 offers a high compression mode. A minimalistic file system shrinks by about 15%.
[Peter: Unconditionally use hc mode for lz4 instead of introducing another option]
Signed-off-by: Matthias Weisser <m.weisser.m@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're disabling fenv.h usage on i386 because it is not available in
musl/uclibc (and not musl/glibc as was written).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The official upstream site is available again, so let's switch to
using it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that xtensa toolchain is able to compile huge functions this
workaround is no longer needed.
This reverts commit d21932508e.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With support from assembler this option allows compiling huge functions,
where single literal pool at the beginning of a function may not be
reachable by L32R instructions at its end.
Currently assembler --auto-litpools option cannot deal with literals
used from multiple locations separated by more than 256 KBytes of code.
Don't turn constants into literals, instead use MOVI instruction to load
them into registers and let the assembler turn them into literals as
necessary.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Auto-litpools is the automated version of text-section-literals: literal
pool candidate frags are planted every N frags and during relaxation
they are turned into actual literal pools where literals are moved to
become reachable for their first reference by L32R instruction.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One of the gcc configure options that we hash for ccache is
--with-pkgversion which is set to something like Buildroot
2015.11-git-00426-ge7e7e4f - i.e., it will change with every buildroot
commit. That's obviously not wanted, so substitute this away.
Also add a \n to the printf so the output is a bit more readable.
[Peter: update documentation to match]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building in a different output directory than the original build,
there will currently be a lot of ccache misses because in many cases
there is some -I/... absolute path in the compilation. Ccache has an
option CCACHE_BASEDIR to substitute absolute paths with relative paths,
so they wil be the same in the hash (and in the output).
Since there are some disadvantages to this path rewriting, it is made
optional as BR2_CCACHE_USE_BASEDIR. It defaults to y because the
usefulness of ccache is severely reduced without this option.
In addition to CCACHE_BASEDIR, we also substitute away the occurences
of $(HOST_DIR) in the calculation of the compiler hash. This is done
regardless of the setting of BR2_CCACHE_USE_BASEDIR because it's
quite harmless.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
