This commit adds support for gcc 5.1 in Buildroot. In terms of gcc
patches, compared to gcc 4.9.x:
* Kept as is, sometimes after minor adjusments:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
850-libstdcxx-uclibc-c99.patch
860-cilk-wchar.patch
* Dropped:
110-pr64896.patch
111-pr65730.patch
* Split in multiple parts:
900-musl-support.patch
The patches from Crosstool-NG for muls support are used instead of
one single patch.
* Renamed:
910-gcc-poison-system-directories.patch to
200-gcc-poison-system-directories.patch
920-libgcc-remove-unistd-header.patch to
201-libgcc-remove-unistd-header.patch
Since the 9xx part of the series is now used by the various musl
related patches.
We have tested the following configurations, with a minimal Busybox
system:
* ARM, uClibc-ng
* ARM, glibc
* ARM, musl
* x86, uClibc-ng and uClibc 0.9.33.2
* x86, glibc
* x86, musl
All of the configurations built fine. All the configurations boot fine
in Qemu, except x86/uClibc (either ng or 0.9.33.2), it segfaults when
running init:
devtmpfs: mounted
Freeing unused kernel memory: 300K (c1389000 - c13d4000)
init[1]: segfault at 0 ip b77708c1 sp bfa9bb0c error 4 in ld-uClibc-0.9.33.2.so[b776c000+6000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
We'll give some time for the uClibc developers to fix the problem
before taking other measures in Buildroot to exclude gcc 5.1 from a
x86/uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise it's a no-op for sh4.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Note: host-binutils-arc-2014.12 install libiberty.a in HOST_DIR
but it was overwritten by the gcc one. The host-binutils's
libiberty.a also broke the host-gdb build. This should be
fixed in a followup patch.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Fixes:
http://autobuild.buildroot.net/results/28f/28f3074e99a35f4321dad2fa6c5abdad14d2d2c6/
And many more.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.
So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.
Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.
Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(ARM and SH4 uClibc toolchain builds)
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Target size growth is ~15 KiB for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally libsanitizer handles the different functionalities gracefully for
each architecture, but it doesn't seem to be the case for SPARC.
Since in general it doesn't support anything for SPARC just disable it.
Fixes bug #7951.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory remove support for non-lfs
tweaks/variables in the package infra and the gcc build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support an internal bfin toolchain hence it's dead code.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was kept for the internal blackfin toolchain which has been removed
since because of lack of maintenance and testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we don't support the internal blackfin toolchain any more
remove unnecessary conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add fix for GCC PR 64896 from the gcc-4_9-branch of gcc.
This fixes bugzilla bug 7961.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libcilk library (used on x86/x86-64 when building with C++ support)
unconditionally uses WCHAR_MIN / WCHAR_MAX, causing build issues with uClibc
when configured without wchar support.
Reported-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new option BR2_GCC_ENABLE_LTO that builds gcc and binutils with
LTO support.
Individual packages still have to enable LTO explicitly by passing '-flto' to
GCC, which passes it on to the linker. This option does not add that flag
globally. Some packages detect if the compiler supports LTO and enable the flag
if it does.
To support LTO, ar and ranlib must be called with an argument which triggers the
usage of the LTO plugin. Since GCC doesn't call these tools itself, it instead
provides wrappers for ar and ranlib that pass the LTO arguments. This way
existing Makefiles don't need to be changed for LTO support. However, these
wrappers are called <tuple>-gcc-ar which matches the pattern to link to the
buildroot wrapper in the external toolchain logic. So the external toolchain
logic is updated to provide the correct symlink.
[Thomas:
- Add a separate BR2_BINUTILS_ENABLE_LTO option to enable LTO
support in binutils. This is a blind option, selected by
BR2_GCC_ENABLE_LTO. It just avoids having binutils.mk poke
directly into gcc Config.in options.
- Remove the check on the AVR32 special gcc version, which we don't
support anymore.
- Adapt the help text of the LTO Config.in option to no longer
mention "Since version 4.5", since we only support gcc >= 4.5 in
Buildroot anyway.
- Fix typo in toolchain-external.mk comment.]
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for AMD steamroller optimizations, available in gcc 4.8+ as
bdver3.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't support older versions that can't handle it any more.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Versions older than GCC v4.9 do not support the Nios-II architecture
so disable them.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to gcc removing a unistd.h header include
in libgcc/config/nios2/linux-atomic.c
The file is built as part of GCC first stage (host-gcc-initial),
and so the header is not accesible. Given the header is not needed
it's fine to simply remove it.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now when new shiny tools are released by Synopsys we're ready for
version update in Buildroot again.
More details about arc-2014.12 release are available here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2014.12
Following patches were removed from GCC since they are a part of release
now:
* 200-size_type_unsigned_int.patch
* 300-ptrdiff_type_int.patch
* 400-call-arc_hazard-before-branch-shortening.patch
* 401-fix-length-attribute-for-casesi_load-pattern.patch
* 402-fix-length-of-instructions-that-are-in-delay-slot-and-needs-to-be-predicated.patch
* 403-update-casesi_compact_jump-instruction-length.patch
But since arc-2014.12 tools are still based on GCC 4.8 following patches
ar still relevant so moving to the new folder to match ARC gcc bump.
* 100-libstdcxx-uclibc-c99.patch
* 910-gcc-poison-system-directories.patch
Binutils are still based on 2.23 so following patch still makes sense:
* 600-poison-system-directories.patch
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libitm (transactional memory) needs SPARC V9+ ISA, otherwise when
enabling C++ the toolchain fails to build:
/tmp/cclQ6hrD.s: Assembler messages:
/tmp/cclQ6hrD.s:1261: Error: Architecture mismatch on "rd".
/tmp/cclQ6hrD.s:1261: (Requires v9|v9a|v9b; requested architecture is
v8.)
Makefile:517: recipe for target 'beginend.lo' failed
make[5]: *** [beginend.lo] Error 1
So disable it for our current (v8, leon3) support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit enables the poison system directories option, which is now
available thanks to the gcc patches that have been added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.7.4, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc arc-2014.08,
and modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH
environment variable to error out instead of just warn when unsafe
paths are used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.8.3, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
This commit adds a patch to gcc borrowed from CodeSourcery/Yocto that
warns about unsafe include paths (i.e /usr/include,
/usr/local/include, etc.). The patch was adapted to gcc 4.9.1, and
modified to support the BR_COMPILER_PARANOID_UNSAFE_PATH environment
variable to error out instead of just warn when unsafe paths are
used. Even though erroring out can be chosen by passing
-Werror=poison-system-directories, we are not sure this option in
CFLAGS will always be passed, so having an environment variable
guarantees it will always be passed, and also allows to have an
identical behavior to the external toolchain wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Freescale e5500 and e6500 cores are supported for versions >= 4.8
So filter out all of the older versions to avoid build failures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the fortran and objective C language support since these have
been deprecated since more than a year ago.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the BR2_GCC_TARGET_TUNE value is always empty now, there is no
longer a point in using it in the gcc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
That gcc series is old and is not used as the default version for
any of the architectures we support, so this commit gets rid of it.
[Thomas: move the Config.in.legacy option at the right location.]
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is support for -mcpu=leon3 from gcc 4.8.3. Use this for LEON systems
instead of the non-mainline targets sparcsfleon, sparchfleon, sparcsfleonv8, and
sparchfleonv8.
[Thomas: add Config.in.legacy handling for the removed options.]
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop PR60102 patch which is now upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed during the dev days. It is broken for uClibc/musl and
architectures not using mainline gcc, so it has only very limited
usefulness.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we switched to a two stage gcc build process, the AVR32
toolchain stopped building. This is because with such an old gcc
version, we cannot use the all-target-libgcc and install-target-libgcc
targets.
Before the two stage gcc, libgcc was only built in gcc-intermediate,
which carried a similar logic. This commit basically restores in
gcc-initial the logic that used to be in gcc-intermediate, which
consists in using the all-target-libcc and install-target-libgcc
targets only for gcc versions others than the AVR32 one.
Using the BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE option has a way of
distinguishing the old AVR32 compiler from the other gcc versions is a
bit ugly, but it's what was done in gcc-intermediate before. And since
the AVR32 support is due to go away at some point in the hopefully
near future, we don't care that much.
This will fix the build of the two AVR32 defconfig that have been
constantly failing since switching to the two stage gcc process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Symptoms usually seen are like that:
--->---
Error: operand out of range (128 is not between -128 and 127)
--->---
where range may differ.
Since compiler tries to use jump/branch instructions with the shortest encoding
of offset it's important to calculate required offset properly.
In case of miscalculation by compiler later assembler throws an error because of
inability to encode requested value.
Fixes are taken from current development branch of GCC for ARC and will be a
part of the next release of ARC tools, so at that point patch should be dropped.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new patch to the ARC 2014.08 gcc specific version,
that redefines PTRDIFF_TYPE from "long int" to "int".
The change of SIZE_TYPE from "long unsigned int" to "unsigned int"
http://git.buildroot.net/buildroot/commit/?id=0f236c1fef669192c8f5cc8ef26e93da91438dc2
introduced a regression due to the existing PTRDIFF_TYPE.
Now to fix regression the patch converts PTRDIFF_TYPE to simple "int".
The fix is taken from current development branch of GCC for ARC and
will be a part of the next release of ARC tools, so at that point
patch should be dropped.
846e92167a
[Thomas: tweak commit log.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cleanup arch/cpu combination limits, we had super-wide depends and it
doesn't help readability, version bumps or testing.
Make the bool/depends/select order the same for all entries.
Drop redundant limitations, for example sparc* if sparc wasn't
supported in general.
Power8 requires at least gcc 4.9.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the kernel patch from:
http://patchwork.ozlabs.org/patch/384285/
There is no problem with latest gcc anymore.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This makes size_t to be "unsigned" ssize_t which makes happy compiler on data
type checks.
Fix is taken from current development branch of GCC for ARC and will be a
part of the next release of ARC tools, so at that point patch should be dropped.
249f040299
Fixes http://autobuild.buildroot.net/results/405/405da9a945511329929b18740b983c51b8dcc43e
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have switched to a two steps gcc build process that uses
only gcc-initial and gcc-final, we can get rid of the gcc-intermediate
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the internal toolchain backend does a three stage gcc
build, with the following sequence of builds:
- build gcc-initial
- configure libc, install headers and start files
- build gcc-intermediate
- build libc
- build gcc-final
However, it turns out that this is not necessary, and only a two stage
gcc build is needed. At some point, it was believed that a three stage
gcc build was needed for NPTL based toolchains with old gcc versions,
but even a gcc 4.4 build with a NPTL toolchain works fine.
So, this commit switches the internal toolchain backend to use a two
stage gcc build: just gcc-initial and gcc-final. It does so by:
* Removing the custom dependency of all C libraries build step to
host-gcc-intermediate. Now the C library packages simply have to
depend on host-gcc-initial as a normal dependency (which they
already do), and that's it.
* Build and install both gcc *and* libgcc in
host-gcc-initial. Previously, only gcc was built and installed in
host-gcc-initial. libgcc was only done in host-gcc-intermediate,
but now we need libgcc to build the C library.
* Pass appropriate environment variables to get SSP (Stack Smashing
Protection) to work properly:
- Tell the compiler that the libc will provide the SSP support, by
passing gcc_cv_libc_provides_ssp=yes. In Buildroot, we have
chosen to use the SSP support from the C library instead of the
SSP support from the compiler (this is not changed by this patch
series, it was already the case).
- Tell glibc to *not* build its own programs with SSP support. The
issue is that if glibc detects that the compiler supports
-fstack-protector, then glibc uses it to build a few things with
SSP. However, at this point, the support is not complete (we
only have host-gcc-initial, and the C library is not completely
built). So, we pass libc_cv_ssp=no to tell the C library to not
use SSP support itself. Note that this is not a big loss: only a
few parts of the C library were built with -fstack-protector,
not the entire library.
* A special change is needed for ARC, because its libgcc depends on
the C library, which breaks building libgcc in
host-gcc-initial. This looks like a bug in the ARC compiler, as it
does not obey the inhibit_libc variable which tells the compiler
build process to *not* enable things that depend on the C
library. So for now, in host-gcc-initial, we simply disable the
build of libgmon.a for ARC. It's going to be built as part of
host-gcc-final, so the final compiler will have gmon support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now when new shiny tools are released by Synopsys we're ready for version
update in Buildroot.
Important change in this release is switching to combined "binutils-gdb" repo
in accordance to upstream move.
Following patch now is a part of the most recent relese:
e6ab8cac62
So dropping it.
package/binutils/arc-4.8-R3/0001-arc-Honor-DESTDIR-in-custom-Makefile.patch
Since arc-2014.08 tools are still based on GCC 4.8 following patch is still
relevant so moving to the new folder to matxh ARC gcc bump.
package/gcc/arc-4.8-R3/100-libstdcxx-uclibc-c99.patch ->
package/gcc/arc-2014.08/100-libstdcxx-uclibc-c99.patch
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.
The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.
This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.
It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.
Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.
The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.
This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.
It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.
Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.
The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.
This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.
It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.
Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.
A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.
Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable shared build for host-gcc-final when building for static targets.
We really want static or shared, there's no such thing as "preferring static"
since we can't choose with any degree of granularity for which packages.
And it confuses linking scripts having both available at the same time. Fixes:
http://autobuild.buildroot.net/results/c54/c54bdf88eff6d60c7001cb0e2cb6792cc75178db/
[Thomas: slightly amend the commit to factorize the installation of
static libraries.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Exclude gcc 4.9.x for PowerPC SPE toolchains because of an ICE
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60102
There's a patch available but it's somewhat intrusive with PPC in
general and hasn't been well tested yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those gcc series are old and are not used as the default versions for
any of the architectures we support, so this commit gets rid of them.
The gcc 4.3.x series technically remains used by the LPC32xx
defconfigs we have:
configs/ea3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/fdi3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/phy3250_defconfig:BR2_GCC_VERSION_4_3_X=y
Back when those defconfigs were introduced, gcc 4.3 was chosen because
it was the only one capable of building a fully working kernel for
those ARM-based platforms. However, the original submitter, Alexandre
Belloni, no longer has access to the hardware platforms, so he is
unable to test if newer gcc versions have fixed the problem. It
certainly doesn't make sense to keep gcc 4.3.x just for those three
boards, so we'll wait for someone actually using those defconfigs to
complain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the switch to 4.8.x as default, the qemu-sparc target is broken.
For a gcc bug report see here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60624
Switch back to gcc 4.7.x as default for sparc.
Disable 4.8/4.9 as suggested by Thomas Petazzoni.
I even disabled gcc snapshot, it works right now, because
it is an old 4.8.0 snapshot by default, but as soon as this is updated
sparc build will break.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gcc graphite optimisations such as loop-interchange, blocking
and loop-flattening, also known as graphite are an optional feature of
gcc that is very well supported since about gcc version 4.5.
This patch adds support for graphite for the toolchain as an optional
flag for versions 4.8 onwards as an optional flag, that is disabled by
default.
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 4.7.x is going to be retired soon, and now that gcc 4.9.0 is out,
it's time for Buildroot to switch to gcc 4.8.x as the default gcc
compiler version.
See https://gcc.gnu.org/ml/gcc/2014-05/msg00324.html for details about
gcc 4.7.x life cycle.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update 900-musl-support.patch with upstreamed chunks.
Now upstreamed hence dropped:
840-PR57717.patch (in another way).
842-gcc-4.8.2-Fix-PR-target-58854.patch
843-gcc-4.8.2-Fix-PR-target-58595.patch
850-xtensa-libgcc-linker-script.patch
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A build issue affects libsanitizer on musl toolchains, even with
previous versions of gcc such as 4.8.x, so we disable building
libsanitizer when working with musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For the moment, the musl support is not in mainline gcc, so it
requires a few patches. We have integrated those patches only for gcc
4.7 and gcc 4.8 at the moment, so only allow those gcc versions when
the musl library is selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc support was added in version 4.6:
http://gcc.gnu.org/gcc-4.6/changes.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to gcc 4.9.x for microblaze since it's a better target than
4.8.x, and also add a build patch that fixes (e)glibc build issues.
Hence disable 4.8.x for microblaze.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Somehow the 'else' part got dropped from commit 3f82e9dbcd (use default gcc
4.8.2 for microblaze), breaking download for "normal" architectures.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream gcc 4.8.2 works fine for microblaze, no need for
Xilinx Git.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only version 4.8+ supports it so keep it narrowed down.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsanitizer requires wordexp() support which we lack in our current
default uClibc configurations (and it's fat & big).
Hence disable it when the toolchain is uClibc-based.
It only affects gcc 4.9+ since it's default on now for supported
platforms.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the arm processor types: add the cortex A12 variant supported by
gcc 4.9.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the recently released gcc 4.9.0.
Use 4.8.2 patches and remove those that no longer apply/are needed
(mostly PR fixes and xtensa).
libmudflap was removed upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add gcc snapshot versions dependency on host-flex and host-bison
(done as suggested by Thomas Petazzoni [1]).
Fixes gcc snapshot version 4.9-20140309 compile failure [2].
Tested the following buildroot configs
BR2_arm=y
BR2_cortex_a9=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_BINUTILS_VERSION_2_24=y
BR2_GCC_VERSION_SNAP=y
BR2_GCC_SNAP_DATE="4.9-20140309"
and
BR2_arcle=y
For the ARC case disabled the BINUTILS_FROM_GIT host-flex and host-bison
dependency.
[1] http://lists.busybox.net/pipermail/buildroot/2014-March/092490.html
[2] http://lists.busybox.net/pipermail/buildroot/2014-March/092459.html
[Peter: simplify logic]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc build scripts use wrong variable name to specify xtensa overlay
application command. As a result gcc is built with the default overlay,
which leads to obscure failures later in the build process.
xtensa toolchain needs an additional configuration for a specific core
variant we're building for. This configuration is called 'overlay' and
is an archive with files for binutils, gcc and gdb that replace
corresponding files in toolchain components.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The xtensa port uses __xtensa_libgcc_window_spill in libgcc to implement
__builtin_frame_address. This symbol is local/hidden in libgcc. This is not a
problem when linking against static libgcc. But g++ defaults to
-shared-libgcc, thus breaking link against C++ shared libraries that are using
__builtin_frame_address as follows:
ld: test: hidden symbol `__xtensa_libgcc_window_spill' in .../libgcc.a(lib2funcs.o) is referenced by DSO
Add upstream patches that make libgcc_s.so a linker script that links in
unresolved symbols from the static libgcc, similar to the ARM and PowerPC
ports.
Fixes:
http://autobuild.buildroot.net/results/e2d/e2d1a763fa86b8575e2e48e6d73c018175f43e7c/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current stripping strategy requires that shared libraries have the
executable permission. However, this is by far not something
recognized as a standard behavior: Debian/Ubuntu distributions for
example do not have executable permissions on their
libraries. Therefore, pushing to upstream packages fixes that add the
executable permissions is not easy.
As a result, this commit improves the stripping logic so that it not
only strips the files that are executable, but also the ones that
match '*.so*', which should match both the shared libraries and the
dlopen()'able plugins, as long as they have a .so extension.
Thanks to this addition, a number of manual "chmod +x" done by various
packages can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This seems to especially affect the kernel, but in an
interrupt-heavy system, this fixes a bug that can cause frequent
NULL pointer dereference crashes on ARM systems.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AMD Jaguar ( https://en.wikipedia.org/wiki/Jaguar_%28microarchitecture%29 ) is
suddenly a popular architecture since it is used in the PS4 and the XBox One.
Many embedded systems are also likely to use it in the next years.
This patch adds support for GCC architecture-specific optimisations and
tuning for these CPUs.
These optimizations are available with GCC 4.8+.
Signed-off-by: Adrien Beraud <adrien.beraud@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since default configure options for host packages include
--disable-static, gcc was not configured to build static version of its
libraries (libgcc.a, libstdc++.a, ...).
This patch replace --disable-static by --enable-static in configure
command. Notice some options was removed sinces they was ignored by gcc
configure script.
Once it was compiled, this commit takes care to copy static libraries to
$STAGING
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The github release mechanism only supports .tar.gz, hence the ugly
GCC_UNPACK variable.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the generic package handler checks for a directory with patches
before starting apply-patches.sh, this is not the case for gcc: the
script is called, even if there is no directory with patches. This results
into a build failure, as apply-patches exits with error code 1 if the
directory doesn't exist.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Config.in(.host) files have constructs like:
config FOO_VERSION
string
default "1.0" if FOO_1_0
default "2.0" if FOO_2_0
default $FOO_CUSTOM_VERSION if FOO_CUSTOM
The dollar sign here is not needed and confusing, so can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the idea of skipping the intermediate gcc step seems to work
fine in most situations, it causes problems with the SSP
support. Until we can figure out a proper solution for this problem,
we need to revert back to the previous solution of a three stages
build.
This reverts commit 2babed4a50.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed on the list. They have been broken for a long time, and are
not commonly used in embedded systems.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mudflap library is only useful if one uses the -fmudflap gcc
option to do more checks on pointers/arrays. This commit adds an
option to enable/disable mudflap support at the gcc level. By default,
it is disabled, which saves a little bit of build time compared to the
default of gcc which consists in enabling mudflap support.
Since mudflap is now disabled by default, and ensured to never be enabled
on platforms where it is not available, some gcc.mk code that was used to
disable mudflap in problematic configurations can be removed.
Whether -fmudflap is used when building is left to the user.
[Peter: tweak commit text, fix white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The HOST_GCC_CONFIGURE_SYMLINK creates a symbolic link
$(@D)/build/configure -> $(@D)/configure for each build step of
gcc. However, it was only using 'ln -s' and not 'ln -sf', which was
causing problems when doing 'make host-gcc-final-reconfigure' for
example, because the configure commands (including this macro) are
being re-executed, but the symbolic link already exists.
Changing this symbolic link creation to 'ln -sf' fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Each stage of the gcc build needs to make a small dance before the
configuration step to create a build sub-directory and a symbolic link
to the configure script. The common gcc.mk had a
HOST_GCC_CONFIGURE_SYMLINK already used by the gcc-initial and
gcc-intermediate steps, but the gcc-final step wasn't using it.
This commit fixes this inconsistency, and therefore removes the
HOST_GCC_FINAL_CONFIGURE_SYMLINK macro.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for eglibc 2.17 was added to the internal toolchain
backend for 2013.08. This commit now adds glibc 2.18 support to the
internal toolchain backend.
Since the building procedure is very similar to the one of eglibc, we
have renamed the 'eglibc' package to 'glibc', and made it capable of
handling either glibc or eglibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The option to enable C++ support was still located in
toolchain/toolchain-buildroot/Config.in.2, with misc other toolchain
options. It seems more logical to have this option with the other
options to select the languages supported by the cross-compiler, so we
move it next to the Fortran/Objective-C options in
package/gcc/Config.in.host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Objective-C support in the gcc package by making
sure that the runtime Objective-C library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_OBJC option rather than the non-existing
BR2_GCC_CROSS_OBJC option, to decide whether Objective-C support
should be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Fortran support in the gcc package by making
sure that the runtime Fortran library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text, to no longer mention gcc < 4.2 since they are no longer
supported in Buildroot, and to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_FORTRAN option rather than the non-existing
BR2_GCC_CROSS_FORTRAN option, to decide whether Fortran support should
be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When NPTL support was introduced, gcc required a three stages build
process. Since gcc 4.7, this is no longer necessary, and it is
possible to get back to a two stages build process. This patch takes
advantage of this, by doing a two stages build process when possible.
We introduce a few hidden kconfig options:
* BR2_GCC_VERSION_NEEDS_THREE_STAGE_BUILD, which is set by the gcc
Config.in logic to indicate that the compiler might need a three
stages build. Currently, all versions prior to 4.7.x are selecting
this kconfig option.
* BR2_TOOLCHAIN_LIBC_NEEDS_THREE_STAGE_BUILD, which indicates whether
the C library might need a three stages build. This is the case for
eglibc, and uClibc when NPTL is enabled.
* BR2_TOOLCHAIN_NEEDS_THREE_STAGE_BUILD finally is enabled when both
of the previous options are enabled. It indicates that a three
stages build is actually needed.
In addition to those options, the uClibc/gcc build logic is changed to
use only a two stages build process when possible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add host-elf2flt to the gcc common dependencies so we get it built after
binutils but before gcc/uclibc since it's required for all packages and
in some uClibc configuration scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build issue with the avr32 toolchain:
http://jenkins.free-electrons.com/job/buildroot/config=atngw100_defconfig/104/
Invalid configuration `MAKEINFO=missing': machine `MAKEINFO=missing' not
recognized
Instead pass it in the environment of ./configure, similar to how it was
done originally in 62322acb2c (toolchain/gcc: disable makeinfo).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation of older GCC versions (E.G. 4.3.x) contain constructs
that are no longer accepted by recent (5.x) versions of makeinfo, breaking
the build.
The documentation isn't really needed, and takes up extra space/build time,
so work around it by disabling documentation, like we had before the
conversion of the toolchain to the package infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5628776c4a
"toolchain-external: fix lib64 symlinks"
lib64 is a symlink to lib so there is no reason to copy the libraries
to lib64 anymore. This fixes multiple building problems
for buildroot toolchains:
[...]
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libuClibc-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libuClibc-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil.so.0'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil.so.0'
are the same file
rmdir: failed to remove
'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64': Not a directory
[...]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It is not clear why 300-libstdc++-pic.patch pre-applied to
gcc-4.2.2-avr32-2.1.5 seems to have come from some older version
of gcc (as early as 4.0.3). This older patch incorrectly refers to
object files to be included in the library libstdc++_pic.a as *.o,
while their location seems to be in .libs/*.o (see the contents at
e.g. https://github.com/ZigFisher/Midge/blob/master/toolchain/gcc/4.0.3/300-libstdc%2B%2B-pic.patch ).
The same patch for gcc 4.1.0 refers to the files as .libs/*.o (see
https://github.com/ZigFisher/Midge/blob/master/toolchain/gcc/4.1.0/300-libstdc%2B%2B-pic.patch ).
This patch corrects rules in Makefile.in.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libmudflap doesn't build for a thumb(1) toolchain so disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes multiple issues, including:
- 'operand out of range' errors (due to defaulting to
medium calls instead of short calls)
- library dependencies that were not being found
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we were using the default ARM instruction set, as used by
the toolchain: the 32 bits ARM instruction set for the internal
backend, and for external toolchain, whatever default was chosen when
the toolchain was generated.
This commit adds support for the Thumb2 instruction set. To do so, it:
* provides a menuconfig choice between ARM and Thumb2. The choice is
only shown when Thumb2 is supported, i.e on ARMv7-A CPUs.
* passes the --with-mode={arm,thumb} option when building gcc in the
internal backend. This tells the compiler which type of
instructions it should generate.
* passes the m{arm,thumb} option in the external toolchain
wrapper. ARM and Thumb2 code can freely be mixed together, so the
fact that the C library has been built either ARM or Thumb2 and
that the rest of the code is built Thumb2 or ARM is not a problem.
[Peter: fix empty BR2_GCC_TARGET_MODE check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using eglibc, the ld-linux loader is installed as
ld-linux-armhf.so.3, but gcc 4.7.x was not yet updated, and generates
binaries that reference ld-linux.so.3. This was fixed starting with
gcc 4.8.x. In order to be able to use gcc 4.7, we create the
appropriate symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ARM EABIhf support was introduced in gcc 4.6.x, so versions
earlier than this one should not be used when EABIhf is selected.
The ARM VFPv4 support was introduced in gcc 4.5.x, so versions earlier
than this one should not be used when VFPv4 is used.
[Peter: drop OABI dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot already has the BR2_GCC_TARGET_{TUNE,ARCH,ABI,CPU} hidden
kconfig strings that allow per-architecture Config.in files to feed
the appropriate values of --with-{tune,arch,abi-cpu} when building
gcc, or the appropriate flags for the external toolchain wrapper.
This commit has two additional options:
BR2_GCC_TARGET_{FPU,FLOAT_ABI}, that allows to define the
--with-{fpu,float} gcc configure options for the internal backend, or
the -m{fpu,float-abi} options for the flags of the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When refactoring the internal toolchain backend logic, the code was
changed to pass the custom configure options given through
BR2_EXTRA_GCC_CONFIG_OPTIONS only for the gcc final pass, with the
idea that we're only interested by user customization for the final
compiler.
However, the beaglebone_defconfig was passing --with-float=hard
--with-fpu=vfpv3-d16 as BR2_EXTRA_GCC_CONFIG_OPTIONS, and since the
refactoring, it was causing build failures of the beaglebone_defconfig
(with messages saying that Busybox is built to use VFP arguments, but
libc/libm are not). This is due to the fact that the gcc intermediate,
which is used to build the C library, wasn't built to generate hard
float, while the final compiler was generating hard float.
So, we get back to the original situation where the options in
BR2_EXTRA_GCC_CONFIG_OPTIONS are passed to all of the compiler
passes. Of course, the specific case of hard float will be fixed by
following patches in this area, but the idea still remains: the three
gcc should have the same options, if those options affected the ABI of
the generated code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 6b48b48034 ("add a know to enable/disable building a shared
libgcc"), from october 2006, isn't really as to why a
BR2_GCC_SHARED_LIBGCC option was needed. However, now that gcc has
been converted to the package infrastructure, it causes problems
because the host packages are always being passed --enable-shared
--disable-static, so re-adding --disable-shared on top of that break
things.
Moreover, our tests indicate that both a shared *and* a static version
of libgcc are built, and that linking dynamically and statically a
program that uses libgcc_s gives correct results: dynamically linked
against libgcc_s in the first case, statically linked in the second
case.
Therefore, it appears that this option is no longer necessary, and
removing it has the advantage of fixing the builds of
qemu_mips64_malta_defconfig and qemu_sparc_ss10_defconfig, both of
which had BR2_GCC_SHARED_LIBGCC not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using the newly introduced 'eglibc' package, this commit enables the
option of building a toolchain using the eglibc C library in the
Buildroot toolchain backend.
In details, this commit:
* Creates a choice to select uClibc or eglibc in the Buildroot
toolchain backend (in toolchain/toolchain-buildroot/Config.in), and
removes the fact that the Buildroot toolchain backend forcefully
enables uClibc (toolchain/Config.in).
* Creates a BUILDROOT_LIBC variables, which points to the package
implementing the C library (i.e either 'uclibc' or 'eglibc').
* Modifies the gcc-final and gcc-intermediate makefiles to use the
BUILDROOT_LIBC variable instead of hardcoding the use of uclibc.
* Ensures that TLS support is always enabled when building eglibc.
[Peter: fix commit text to refer to BUILDROOT_LIBC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update manual to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several sub-directories of the gcc code base are in fact not needed
for the Buildroot build: libjava/, libgo/ and gcc/testsuite/ being the
biggest ones. Avoiding their extraction saves quite a bit of disk
space, and compensates a bit the fact that we now extract three times
the gcc source code.
This requires changing the 100-uclibc-conf.patch to no longer patch
files from the libjava/ directory, since this directory is no longer
extracted.
[Peter: add comment about why this is done]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
