Also mark this driver as broken. It fails to compile since it
needs some headers from OpenBSD/NetBSD. We actually don't care
about this driver.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Also fix building as the patch was correct, but autoreconf
had to be done for it to take effect.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
This reverts commit 1d7b6f65c6.
The fsync patch tries to add the same lines already added by
busybox-1.16.0-compat.patch, so skip it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
First, the build was failing with:
cd .. && /bin/sh /home/test/brbuild/build/cgicc-3.2.7/support/missing --run autoheader
/home/test/brbuild/build/cgicc-3.2.7/support/missing: line 52: autoheader: command not found
WARNING: `autoheader' is missing on your system. You should only need it if
you modified `acconfig.h' or `configure.ac'. You might want
to install the `Autoconf' and `GNU m4' packages. Grab them
from any GNU archive site.
That was because the PATH doesn't contain $(HOST_DIR)/usr/bin. So we
pass $(TARGET_MAKE_ENV) when calling make.
Then, the build was failing because of the crappy configure.ac and
doc/Makefile.am this project has. configure.ac checks if doxygen is
available, and if it isn't, it sets DOXYGEN to /bin/echo. Then,
doc/Makefile.am does:
DATE=`date '+%-d %b %Y'` VERSION=$(VERSION) $(DOXYGEN) Doxyfile
cp $(IMAGES) cgicc-doc.css html
mv html/index.html html/index.html.bak
When DOXYGEN=/bin/echo, then the first line does not generate anything
in html/, and the third line fails.
Therefore, we add a patch that allows to pass a --disable-doc option,
which removes the check for Doxygen. If --enable-doc is passed, then
the configure script fails if Doxygen isn't found (but in the
Buildroot case, we always pass --disable-doc to avoid the doxygen
dependency).
We also take this opportunity to bump the version of libcgicc, and to
remove a patch that is no longer needed due to this version bump.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#1183.
When gmp/mpfr is needed for the host (E.G. when using an internal toolchain),
the host-lib{gmp,mpfr}-source targets weren't added to HOST_SOURCE, so
make source / external-deps didn't handle them.
Notice that we have the same issue with the new host package support,
there we should probably use HOST_<package>_DEPENDENCIES for -source
dependencies.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without intltool, configuration fails with:
checking for intltool >= 0.35.0... ./configure: line 28714: intltool-update: command not found
found
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Before the autotools conversion, xfont_font-util was installed in
staging, so keep this.
However, the current way of handling xfont_font-util is ugly. The
post-install.sh script removes the binaries compiled for the target
from the staging directory and replaces them by symbolic links to
utils installed on the host (making the incorrect assumption that they
are available).
It looks like xfont_font-util needs to be built for the host (using
the new infrastructure for host autotools package). This is certainly
post-2010.02 though.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
madplay was failing to build with errors such as :
audio_alsa.o: In function `config':
audio_alsa.c:(.text+0x200): undefined reference to `snd_pcm_hw_params_set_rate_near@ALSA_0.9'
audio_alsa.c:(.text+0x25c): undefined reference to `snd_pcm_hw_params_set_buffer_time_near@ALSA_0.9'
audio_alsa.c:(.text+0x284): undefined reference to `snd_pcm_hw_params_get_buffer_size@ALSA_0.9'
audio_alsa.c:(.text+0x2a4): undefined reference to `snd_pcm_hw_params_set_period_time_near@ALSA_0.9'
audio_alsa.c:(.text+0x2d4): undefined reference to `snd_pcm_hw_params_get_period_size@ALSA_0.9'
The ALSA library uses symbol versioning by default, to handle ABI
changes. However, since uClibc doesn't seem to support symbol
versioning, we disable this when building the ALSA library by passing
--without-versioned.
However, madplay relies on the old ALSA ABI, so even without symbol
versioning, references to versioned symbols are generated (functions
with the same name, but different API, exist in the old and new API).
The easiest solution is to switch madplay to the new API. This is done
thanks to a patch written by Micha Nelissen <micha@neli.hopto.org> and
available at http://article.gmane.org/gmane.comp.audio.mad.devel/729.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module got disabled when pango was upgraded to 1.19.3. But now,
the module builds fine. And even more: disabling it breaks the build
when modules are compiled statically into pango.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gtk-doc.m4 file is now installed globally (see the automake
package), so there's no point in including a pango-specific patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is an old package. It is currently broken, and probably nobody
uses it. So let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following build failure:
checking lex output file root...
configure: error: cannot find output from flex; giving up
Caused by the fact that a host version of flex is missing
in $(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I could have created a !dependency on !BR2_PTHREADS_OLD, but that
wouldn't work with external toolchains. So, let's just add a notice in
the help message of WebKit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mplayer configure script was failing with:
Checking for iconv program ... no
No working iconv program found, use
--charset=UTF-8 to continue anyway.
If you also have problems with iconv library functions use --charset=noconv.
Messages in the GTK-2 interface will be broken then.
Therefore, we pass --charset=UTF-8 instead of --charset=US-ASCII.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--without-html-dir doesn't work. It leads libsoup ./configure script
to think that HTML_DIR is "no", which leads to the installation of the
documentation in $(STAGING_DIR)no (yes, with the "no" suffix at the
end). The issue is that --with-html-dir is not an enable/disable type
of option, it's an option that only allows to pass a PATH for
documentation installation.
As we don't want the documentation to be installed in this odd
$(STAGING_DIR)no directory, we simply get rid of this option.
See 7e62e8ec72 for another instance of
the same problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes different problems:
* The autogen script of Webkit did not find autoconf, automake and
aclocal since they are not installed in the host, but in
$(HOST_DIR). Therefore we pass HOST_CONFIGURE_OPTS to autogen.sh so
that the PATH is correct.
* The autogen script was complaining that gtk-doc.make could not be
find. As compiling gtk-doc completely is a pain (depends on
Docbook), we just include gtk-doc.make into package/webkit/, and
copy it to the source directory.
* The autogen script was complaining about macros used in
gtk-doc.make that did not exist. This is because aclocal was not
run with $(STAGING_DIR)/usr/share/aclocal/ in the include
path. Therefore, we fix ACLOCAL_FLAGS of Webkit's autogen script
before running it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure that we touch the target so that the target is newer than
the .compiled stamp file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After being copied to target/, touch dmsetup so that its date is newer
than the .built stamp file in lvm2 source directory. This prevents
make from re-installing dmsetup every time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding real targets to $(TARGETS) doesn't work, since they are
prefixed __real_tgt by the main Makefile. 'make' then always thinks
that these targets aren't up-to-date, and re-generate them every time.
Therefore, we switch dosfstools to the more common way of handling
packages, with a phony target added to $(TARGETS), this phony target
depending on real targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Real targets should not depend on phony targets, otherwise they get
rebuilt everytime.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Real targets should not depend on phony targets, otherwise they get
rebuilt every time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox-desktop fails to build because it tries to read
/usr/lib/libxcb.la, which doesn't exist on a very basic system with no
development files instead. The buildroot-libtool.patch must therefore
be applied.
Unfortunately, matchbox doesn't yet use the autotools infrastructure,
so we have to manually apply the patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At install stage, iw needs pkg-config, through the PKG_CONFIG
environment variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some reason, our imagemagick.mk file calls libtool, but assumes
that libtool is available on the host, which may not be
true. Therefore, we use ImageMagick's internal libtool, which has been
used for compiling/linking all the rest of ImageMagic anyway.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
imagemagick configure script wants to run programs to detect the
file_offset_bits, but fails since it is running cross-compile
mode. Therefore, we help the configure script by passing the
appropriate ac_cv variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When installing shared-mime-info on the target, we runn
update-mime-database, which has been built previously by building and
installing shared-mime-info for the host. However, for
update-mime-database (host version) to run properly, we must pass the
appropriate LD_LIBRARY_PATH variable.
We re-use the existing $(HOST_MAKE_ENV) variable to pass all the
appropriate variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gob2 for the target needs both flex on the host (for running the flex
program at compile time) and flex on the target (so that it can link
against libfl.a).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flex contains a libfl.a directory, which programs for the target might
link against. Therefore, we need to install flex to the staging
directory. An example of such a program is gob2, which needs the
yywrap() function, which is implemented by libfl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This XML internationalization set of tools is required to build
several of our packages, and may not be available on the host machine.
Only the host variant has been tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we build Perl modules in $(HOST_DIR), PERLLIB must be defined
to $(HOST_DIR)/usr/lib/perl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This Perl module is needed to build intltool, which in turn is needed
to build several of our packages. We assume that Perl is installed on
the host.
Only the host variant of this package has been tested and is used. The
code for the target variant (what to do at the configure, build and
install steps) isn't implemented, but the GENTARGETS call for the
target is mandatory, due to limitations of the Makefile.package.in
infrastructure (if one wants the host package to be implemented, then
the target package *must* exist). This limitation will be removed
after 2010.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Making a full build of libgtk2 for the host is a pain, since it
requires host-cairo, which it turns requires a full X.org stack to be
compiled for the host.
Moreover, building libgtk2 for the host completely is useless: we only
need gdk-pixbuf-csource and gtk-update-icon-cache.
In this patch, we add a new
host-libgtk2-2.12.12-reduce-dependencies.patch, that is only applied
to libgtk2 when being built for the host. This patch removes a lot of
dependencies in configure.in, which allows to:
* run make and make install in gdk-pixbuf/, which compiles and
installs the gdk-pixbuf library and the gdk-pixbuf-csource utility
* run make gtk-update-icon-cache in gtk/, which compiles the
gtk-update-icon-cache utility, which is then installed manually
The compilation and installation steps of libgtk2 for the host are
therefore overriden, so as to not use the default behaviour, which
would attempt to build the full gtk library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is BROKEN in the way it compiles make-imglib and text2c
for the host while being in cross-compiled mode. It does not use
CC_FOR_BUILD and CFLAGS_FOR_BUILD as it should.
No upstream release has been made since 2001 and since it is a
relatively useless package, I don't think it's worth the trouble to
sanitize its build system.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libpng is needed on the host to build the make-imglib utility, built
during the compilation of ace_of_penguins for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the compilation of target or host packages, host tools might be
used, and in turn, they might use host libraries installed in
$(HOST_DIR)/usr/lib. Therefore, we pass a LD_LIBRARY_PATH variable
when building packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
zlib is needed on the host, to build xlib_libfontenc on the host, to
build xapp_mkfontscale on the host, in order to finally build xfonts
encodings on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xlib_libfontenc is required to build xapp_mkfontscale on the host,
which in turn is needed to build font encodings for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfontscale on the host is needed to build xfont_encoding, therefore
we add host-xapp_mkfontscale as a dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfontscale on the host is required to build xfonts-encoding for the
target.
We also fix the dependencies. xlib_libX11 is not needed to compile
xapp_mkfontscale. However, xproto_xproto is needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure that libxcb depends on host-xsltproc, since xsltproc is
required for the compilation of libxcb.
Moreover, remove the XSLTPROC=/usr/bin/xsltproc variable definition,
which was assuming that XSLTPROC was installed on the host. xsltproc
should just be part of the PATH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compiling libxcb (from the X.org stack) requires xsltproc on the host,
which is part of libxslt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libtool patch is not applied when building for the target because
it does not apply, so do not attempt to apply it when building for the
host. This fixes libxml2 build for the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
automake for the target fails to build if autoconf is not installed on
the host:
checking whether autoconf is installed... no
configure: error: Autoconf 2.58 or better is required.
Please make sure it is installed and in your PATH.
make: *** [/home/test/brbuilttest/build/automake-1.10/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package requires Xaw3d, that has never been packaged in
Buildroot. As no-one seems to be using this package, it's probably not
worth the effort of packaging Xaw3d, a old-looking widget
toolkit. Therefore, just drop the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ace_of_penguins fails to build when xlib_libXpm is not selected. Add
it has a dependency. However, contrary to normal dependencies to
libraries (where we use 'select') we use 'depends on' here, otherwise
the X.org server will be get selected automatically without the user
noticing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Two variants of the ncurses library exist: the normal one, and the
ncursesw one, which has support for wide char. Currently, Buildroot
only builds the normal variant (the second variant requires
--enable-widec while compiling ncurses).
Unfortunately, when libncursesw is installed on the host, the
configure script of alsa-utils finds /usr/bin/ncursesw5-config and
thinks that the target has this version. Unfortunately, as this is not
the case, it causes a configure failure when trying to link a sample
program against libpanelw (which is part of ncurses).
Therefore, we force the libncurses variant used by alsa-utils to the
normal variant.
Later on, if needed, support for the wide-char variant of the
libncurses library could be added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this patch alsamixer complains about missing libs and
ldd says:
libform.so.5 => not found
libmenu.so.5 => not found
libpanel.so.5 => not found
libncurses.so.5 => /usr/lib/libncurses.so.5 (0x4000e000)
libasound.so.2 => /usr/lib/libasound.so.2 (0x40056000)
... <cut>
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise, even if speex is selected, as gstreamer is compiled first,
speex plugin is not activated/built.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
rsync source repository has moved (?).
Bump version while we are at it.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current version of alsa-lib (1.0.22) does not build when
--disable-pcm is used at configure time. I've reported the issue at
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4913.
In the mean time, we can prevent the user from not selecting PCM
support by using the following patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version of TCL is bumped from 8.4.9 to 8.4.19, which fixes the
build breakage reported by Maxime Ripard <maxime.ripard@anandra.org>
on January, 6th, 2010.
The tcl-strtod patch is kept since it is still needed, the two other
patches are no longer useful.
At the same time, the package is converted to the autotools
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The .pc file of TrapProto says that it depends on xt, even through it
doesn't depend on it at compile time. However, if xt isn't present
when TrapProto has been installed, the compilation of Xserver fails
telling that there is a missing dependency in TrapProto on Xt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When packages using gtk-doc are autoreconfigured, aclocal complains
because it cannot find the macros defined in gtk-doc.m4. We could
compile the gtk-doc package for the host, but it depends on
gnome-doc-utils, which depends on libxml2, libxslt, and other packages
as well.
Since we don't care about the documentation, all is needed is in fact
the gtk-doc.m4, so that the configure script can be generated, and we
can use the --disable-gtk-doc to not generate the documentation.
To solve this, we include a gtk-doc.m4 file in package/automake/, and
it gets installed in $(STAGING_DIR)/usr/share/aclocal/ during the
installation of the host automake (used for autoreconfiguration of
packages).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch that makes sure config.h gets included in a file that uses
some of the NEEDS_* macros. The yywrap() function was missing when
flex was not available on the target, even though this configuration
is supposed to be supported by at (and handled by NEEDS_YYWRAP).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a patch that includes pcap.h instead of hardcoding an incorrect
prototype for a function provided by libpcap.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch, gotten from liboil git (recent commit), fixes the problem.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And also adapt X depency. Rdesktop only needs libX11/Xt, and long term
we should be able to use the X stuff without having a X server on the
target.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Build host version in build/mtd-utils-<VERSION>-host like other host
packages, and install into host/usr/sbin.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#1003.
Several config options have gotten renamed in 1.16, making the 1.13.x
defconfig not enable the stuff we want.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: renamed patches to get picked up by infrastructure]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch bash32-011 modifies the configure.in script. Therefor we need to
run autoconf before launching the configure script. Otherwise, once
the configure script called, the makefile's dependencies over
configure.in will relaunch autoconf without options/environnement
variables we usually set when calling configure.
[Peter: use our own host-autoconf instead of what's on the host]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: updated to 2.22.4 instead which is so far only on ftp.gnome.org,
fixed build without IPv6 support]
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So "/opt/whatever_toolchain/gcc --sysroot $(STAGING_DIR)" isn't
stripped to "/opt/whatever_toolchain/gcc", making gcc to look at
$(ORIGINAL_TOOLCHAIN_DIRECTORY)/usr/include instead of
$(STAGING_DIR)/usr/include. For more CC is already filled when
running the configure script.
This problem should only be visible with an external toolchain.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make install would fail if target != host, as it tried to use host strip
for install -s.
Patch 1-5 from ptxdist.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Could not apply when missing top level Makefile, which is also
regenerated by the configure script.
Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If SDL is built before tslib, then SDL can't detect it at configure
time and so touchscreen's support in SDL is crappy.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
