The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PLM xilinx_v2023.2
- PSMFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following options were wrongly kept when bumping to version 3.0.3 in
commit 18420d9b6b:
- dmraid (dropped since
d174944a85)
- bcache and kbd (dropped since
c1ff1c87e3)
- python2 (dropped since
8fc33b8345)
- vdo (dropped since
e51faac2a9)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version
1.1.4 in commit 7205df8a4f:
CMake Error at /home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/bin/cmake_install.cmake:60 (file):
file RPATH_CHANGE could not write new RPATH:
$ORIGIN/../lib
to the file:
/home/autobuild/autobuild/instance-13/output-1/host/arc-buildroot-linux-uclibc/sysroot/usr/bin/memcapable
No valid ELF RPATH or RUNPATH entry exists in the file;
Call Stack (most recent call first):
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/src/cmake_install.cmake:52 (include)
/home/autobuild/autobuild/instance-13/output-1/build/libmemcached-1.1.4/cmake_install.cmake:52 (include)
Fixes:
- http://autobuild.buildroot.org/results/778ff517d465896f54a3cd5316a66c54f66fd4cb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add firmware files for RTL8851 and RTL8852 cards used by the rtlbt driver.
Signed-off-by: Jan Čermák <sairon@sairon.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 51d6d6c580.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
51d6d6c580 (Fix rasberry Pi 64bit firmware overlay inclusion); the
commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6021f3678b.
That change is no more relevant since the genimage.cfg files are
generated by the commit e37ee5acdc (board/raspberrypi/post-image.sh:
generate genimage config from template if not present), and since the
variant-specific files were dropped off by the commit fc5cdeed72
(board/raspberrypi: drop variant-specific genimage files).
This removes the very last alive piece of change of the commit
6021f3678b (board/raspberrypi: handle dtb overlays for all variants);
the commit is fully reverted now.
Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As upstream developer mentioned in private communication, the code using
NETDB_INTERNAL is now disabled. Remove the patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imx6ulz supports freescale-imx too so let's add it to the bool name for
completeness.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Switch site to get latest release
- Drop all patches (already in version)
- Update hash of COPYING-LGPL, empty lines removed with
cceb1b2d80
- Pass $(TARGET_CONFIGURE_OPTS) to install targets to avoid using wrong
values since
abdf4074c3https://github.com/johnsonjh/duma/blob/VERSION_2_5_21/CHANGELOG
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--with-ssl-dir will exclusively search for dynamic library so use
--with-ssl-static to fix the following openssl static build failure
raised since bump to version 5.33.0 in commit
8cedb39764:
checking for static SSL support... disabled
checking for SSL support... enabled
checking for SSL include directory... /home/buildroot/autobuild/instance-2/output-1/host/mipsel-buildroot-linux-uclibc/sysroot/usr/include
checking for SSL library directory... /lib64
[...]
mipsel-buildroot-linux-uclibc-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/lib64'
Fixes:
- http://autobuild.buildroot.org/results/4189decbafb5d28c11d89ddac792b4610abeaff1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc >= 12:
task.c: In function 't_start':
task.c:398:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
398 | return ret;
| ^~~
task.c:364:13: note: 'ret' was declared here
364 | int ret;
| ^~~
task.c: In function 't_resume':
task.c:444:16: error: 'ret' may be used uninitialized [-Werror=maybe-uninitialized]
444 | return ret;
| ^~~
task.c:428:13: note: 'ret' was declared here
428 | int ret;
| ^~~
Fixes:
- http://autobuild.buildroot.org/results/bc1b40de22e563b704ad7f20b6bf4d1f73a6ed8a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following NLS build failure raised since the addition of the
package in commit 9f4f8c5f89:
/home/buildroot/autobuild/run/instance-2/output-1/host/lib/gcc/arm-buildroot-linux-musleabihf/12.3.0/../../../../arm-buildroot-linux-musleabihf/bin/ld: ../../src/common/.libs/libcommon.a(libcommon_la-i18n.o): undefined reference to symbol 'libintl_bindtextdomain'
Fixes:
- http://autobuild.buildroot.org/results/8ab13cf474d732c95a1da65592d950b24b3d474b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure with gcc 4.8 raised since bump to
version 1.1.4 in commit 7205df8a4f:
/home/buildroot/autobuild/run/instance-0/output-1/build/libmemcached-1.1.4/src/libmemcachedprotocol/ascii_handler.c: In function 'ascii_get_response_handler':
/home/buildroot/autobuild/run/instance-0/output-1/build/libmemcached-1.1.4/src/libmemcachedprotocol/ascii_handler.c:249:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int x = 0; x < keylen; ++x) {
^
Fixes:
- http://autobuild.buildroot.org/results/202aeec4dda822ac341d8882f84f968a303697c3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-43887: Libde265 v1.0.12 was discovered to contain multiple
buffer overflows via the num_tile_columns and num_tile_row parameters in
the function pic_parameter_set::dump.
Fix CVE-2023-47471: Buffer Overflow vulnerability in strukturag libde265
v1.10.12 allows a local attacker to cause a denial of service via the
slice_segment_header function in the slice.cc component.
https://github.com/strukturag/libde265/releases/tag/v1.0.14https://github.com/strukturag/libde265/releases/tag/v1.0.13
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am no longer work at Synopsys, so remove this email address.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following build failure raised since bump to version 1.1.4 in
commit 7205df8a4f:
/home/buildroot/autobuild/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/sparc-buildroot-linux-uclibc/11.3.0/../../../../sparc-buildroot-linux-uclibc/bin/ld: CMakeFiles/aslap.dir/ms_conn.c.o: undefined reference to symbol '__atomic_fetch_add_4@@LIBATOMIC_1.0'
Fixes:
- http://autobuild.buildroot.org/results/c8e4e1f9609d1339fe070afe440c63660892600e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following selftests build failure raised since kernel >= 6.5 and
9fc96c7c19:
make[1]: Entering directory '/home/autobuild/autobuild/instance-4/output-1/build/linux-6.6.3/tools/testing/selftests'
error: missing kernel header files.
Please run this and try again:
cd ../../..
make headers
make[1]: *** [Makefile:186: kernel_header_files] Error 1
Fixes:
- http://autobuild.buildroot.org/results/7674abb454b46ca768e44b6838a0d8724c772dd6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PUTTY_GSSAPI is enabled by default resulting in the following build
failure since bump to version 0.78 in commit
5673ea3ce4:
/home/fabrice/buildroot/output/build/putty-0.79/unix/gss.c:133:10: fatal error: gssapi/gssapi.h: No such file or directory
133 | #include <gssapi/gssapi.h>
| ^~~~~~~~~~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/d6d06b5aa0df070c3880399e044fb3cd3a830aec
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix CVE-2023-47038 - Write past buffer end via illegal user-defined Unicode property
note: 5.36.2 was a broken release
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2023-38703: PJSIP is a free and open source multimedia
communication library written in C with high level API in C, C++, Java,
C#, and Python languages. SRTP is a higher level media transport which
is stacked upon a lower level media transport such as UDP and ICE.
Currently a higher level transport is not synchronized with its lower
level transport that may introduce use-after-free issue. This
vulnerability affects applications that have SRTP capability
(`PJMEDIA_HAS_SRTP` is set) and use underlying media transport other
than UDP. This vulnerability’s impact may range from unexpected
application termination to control flow hijack/memory corruption. The
patch is available as a commit in the master branch.
https://github.com/pjsip/pjproject/security/advisories/GHSA-f76w-fh7c-pc66https://github.com/pjsip/pjproject/releases/tag/2.14
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Needed in order to use omlibdbi module
Signed-off-by: Flávio Tapajós <flavio.tapajos@newtesc.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following static build failure raised since bump to version 0.78
in commit 5673ea3ce4:
In file included from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/putty.h:8,
from /home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/callback.c:8:
/home/buildroot/autobuild/instance-0/output-1/build/putty-0.78/unix/platform.h:11:10: fatal error: dlfcn.h: No such file or directory
11 | #include <dlfcn.h> /* Dynamic library loading */
| ^~~~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/06f0b14bd0414f97b06070198e290fb3253348c5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-numpy needs gcc >= 8.4 since bump to version 1.25.0 in commit
ca63464e37 and
4002a7d421:
../output-1/build/host-python-numpy-1.25.0/meson.build:30:4: ERROR: Problem encountered: NumPy requires GCC >= 8.4
Fixes:
- http://autobuild.buildroot.org/results/9ec82be71c908873112064792ace283049355031
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3e76df02b3 forgot to add a comment
about threads dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following wolfssl build failure raised at least since bump to
version 7.4.0 in commit 6b5907bf65:
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c: In function 'ssl_last_error_string':
/home/autobuild/autobuild/instance-4/output-1/build/rtty-8.1.0/src/ssl/openssl.c:143:24: error: implicit declaration of function 'ERR_peek_error_line_data'; did you mean 'wolfSSL_ERR_get_error_line_data'? [-Werror=implicit-function-declaration]
143 | ssl_err_code = ERR_peek_error_line_data(&file, &line, &data, &flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| wolfSSL_ERR_get_error_line_data
Fixes:
- http://autobuild.buildroot.org/results/9db9f1dcc6760de4b78771bb79f109c4efd06c36
- http://autobuild.buildroot.org/results/16422af9469de114e552124542508c3b18ea8f19
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: don't force wolfssl-all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Removed backported patch:
- bc3f12bfac.patch
Updated ZFS test to pass this new version; drop the explicit /pool
mountpoint option to rely on the default location (which happens to be
/pool already).
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- needed on master to further bump to a data-corruption fix
]
(cherry picked from commit d153e58d13)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This bump will fix the following build failure with kernel >= 6.2 thanks
to
51761c3fe2:
/home/buildroot/autobuild/instance-1/output-1/build/xtables-addons-3.22/extensions/xt_TARPIT.c:
In function 'xttarpit_honeypot':
/home/buildroot/autobuild/instance-1/output-1/build/xtables-addons-3.22/extensions/xt_TARPIT.c:110:26:
error: implicit declaration of function 'prandom_u32_max'; did you mean
'prandom_u32_state'? [-Werror=implicit-function-declaration]
110 | (prandom_u32_max(0x20) - 0xf);
| ^~~~~~~~~~~~~~~
| prandom_u32_state
Fixes:
- http://autobuild.buildroot.org/results/e8f2a0cb5b38ff98da97268c4b642554a0a732e1
- http://autobuild.buildroot.org/results/0191ee0590c08b73f17b35a5c8521796693772b5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This bump will fix the following build failure with kernel >= 6.2 thanks
to
51761c3fe2:
/home/buildroot/autobuild/instance-1/output-1/build/xtables-addons-3.22/extensions/xt_TARPIT.c:
In function 'xttarpit_honeypot':
/home/buildroot/autobuild/instance-1/output-1/build/xtables-addons-3.22/extensions/xt_TARPIT.c:110:26:
error: implicit declaration of function 'prandom_u32_max'; did you mean
'prandom_u32_state'? [-Werror=implicit-function-declaration]
110 | (prandom_u32_max(0x20) - 0xf);
| ^~~~~~~~~~~~~~~
| prandom_u32_state
Fixes:
- http://autobuild.buildroot.org/results/e8f2a0cb5b38ff98da97268c4b642554a0a732e1
- http://autobuild.buildroot.org/results/0191ee0590c08b73f17b35a5c8521796693772b5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
--with-xtables is an unrecognized option since the addition of the
package in commit 490917387a:
a576f4d43e/configure.ac
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls, --with-xtables
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a small bugfix release which solves a build issue, a memory
leak, and fixes touch input on rotated screens with the DRM/KMS module.
Release notes:
https://wpewebkit.org/release/cog-0.18.1.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream re-released the v0.1.8 tarballs with autotools related stuff. [1]
That makes the hash test to fail:
ERROR: while checking hashes from package/libusb-compat//libusb-compat.hash
ERROR: libusb-compat-0.1.8.tar.bz2 has wrong sha256 hash:
ERROR: expected: 698c76484f3dec1e0175067cbd1556c3021e94e7f2313ae3ea6a66d900e00827
ERROR: got : b692dcf674c070c8c0bee3c8230ce4ee5903f926d77dc8b968a4dd1b70f9b05c
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Update the hash and drop LIBUSB_COMPAT_AUTORECONF.
[1] https://github.com/libusb/libusb-compat-0.1/issues/28#issuecomment-1759400548
[Peter: use .tar.gz to not conflict with s.b.o]
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
