- Update kernel
- Add u-boot configuration
- 6q_bootscript.txt is no more needed by new version of u-boot
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
[build test only]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Enable evdev for extra X testing.
Drop bloat/redundant options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Use a custom kernel config to avoid the caveat of a huge debug-enabled
one.
And also reduce defconfig options to avoid bloat.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch kernel config to ext4, simplify to reduce bloat.
Adjust invocation to keep the framebuffer window for graphics testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch to DTB (mandatory).
And adjust invocation to use dtb and add a little more RAM for testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Remove redudant/pointless kernel options to reduce bloat.
Switch from smc9111 to rtl8139 for networking because of issues.
Enable evdev support for better x11 testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Document the correct defconfig for ARMv7 based RPi-2.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX28 Evaluation Kit (or EVK) is Freescale's evaluation board based on the
i.MX287 Applications Processor.
This defconfig is based on mainline u-boot and Linux kernel.
Also, we add an SD card creation script and documentation, shamelessly based on
the ones for i.MX5/6 by Luca Ceresoli.
[Arnout: fixate U-Boot and kernel (headers) versions]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SABRE Board for Automotive Infotainment (SABRE Auto, a.k.a. SABRE-AI) is
Freescale's evaluation board based on the i.MX 6 ARM Cortex-A9 applications
processor.
Those defconfigs are an adaptation of freescale_imx6{q,dl}sabresd_defconfig for
SABRE Auto, and are thus based on Freescale "official" git repo on
git.freescale.com and SW release 3.10.17_1.0.0_ga.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rename imx6sabresd board folder to imx6sabre, to prepare for Sabre Auto
addition. Update doc, link and defconfigs accordingly.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Eric Bénard <eric@eukrea.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX31 Product Development Kit (or PDK) is Freescale development board
based on the i.MX31 application processor.
This defconfig is based on mainline kernel v3.15.10, and is aimed at a PDK in
"3 stack" configuration, with CPU engine board, personality board and debug
board.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The RPi-2 has its own DTB, so document it in the list of generated
files.
Also, not all DTBs need to be present on the boot partition, so add a
comment that identifies which should be copied for each model.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a small development board, based on Freescale IMX6 Solo SoC
(single core ARM Cortex-A9). The board has excellent support in mainline
U-Boot and Linux.
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update configuration to use the 3.18.8 kernel and update U-Boot to
2015.01. With the switch to 2015.01. use the U-Boot SPL image for the
first stage bootloader instead of the at91bootstrap. The U-Boot SPL
requires that the U-Boot image format be u-boot.img in order to load
from the SD card.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qemu_arm_vexpress_defconfig is broken for 3.19 so keep it with 3.18.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The instructions for the Raspberry Pi 2 (aka model B2) are the same as
the ones for the Raspberry Pi, so:
- state so in the existing readme
- create a symlink raspberrypi2 -> raspberrypi
Also fix typo in spelling of "Raspberry Pi" (two words, not one).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
the loaduimage command was renamed to loadimage when the default kernel
image changed from uImage to zImage in u-boot commit e3cf9692053a, which
made it into the v2013.10 u-boot release that the beaglebone_defconfig
currently builds.
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rootfs.tar file is located under ./output/images/.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is an example of a Device-Tree-enabled Raspberry Pi defconfig.
We have to use a 3.18-based kernel for that, but there are a few
limitations:
- we can not use the minimalist RPi defconfig bundled with the kernel,
namely bcmrpi_quick_defconfig, because it is not DT-enabled, and
sets CONFIG_ARM_PATCH_PHYS_VIRT to 'n', which prompts a value for
CONFIG_PHYS_OFFSET, as it as no default for the bcm familly;
- most importantly, the rpi-3.18.y branch is constantly rebased, so
there is no guarantee that the sha1 I use today will still be usable
in the long term. Using the name of hte branch is not better either.
So, we bundle our own DT-enabled linux defconfig that is based on
bcmrpi_quick_defconfig, with just CONFIG_ARM_PATCH_PHYS_VIRT set and the
Device TRee enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those files were previously installed, but that's no longer the case
since we select in the menuconfig which version of the bootloader we
install.
[Thomas: fix minor typo in commit log.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Used to test the new default binutils 2.24 (all passed).
Also update the virtex readme since the dtb is in output/images as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS Creator CI20 is a Linux and Android development system from
MIPS/Imagination Technologies. It incorporates an Ingenic JZ4780 SoC
which includes a 1.2GHz dual core MIPS32 processor and Imagination
PowerVR SGX540 GPU.
More information can be found at:
http://elinux.org/MIPS_Creator_CI20
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
in order to not depend on the previous permissions of each file
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the apf9238 support is in the mainline kernel, we can bump to
kernel 3.17.2.
The patches can be removed because:
- linux-3.1.1-0001-fixes_arm_mach-types_for_apf9328.patch is no
longer needed, since the machine number for apf9328 is now
upstream.
- linux-3.1.1-0002-add_missing_config_option_for_apf9328.patch is no
longer needed, because the MTD_CFI_INTELEXT option is selected by
the imx_v4_v5_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
