Add support for the SolidRun Armada 8040 based Clearfog GT-8K. This
board has the same processor as the Macchiatobin, so we can reuse the
Macchiatobin U-Boot and image definitions.
The kernel fragment enables drivers that are necessary to make
networking ports work (SFP, Ethernet port, and Ethernet switch).
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 6ebaef3818
("package/python-ipython: bump to version 7.4.0"), ipython is no
longer available for Python 2.x, as it requires Python 3.x.
However, the corresponding test case that was testing iPython under
Python 2.x was not removed at the same time, causing a failure of
TestIPythonPy2 test. Let's drop the test that is no longer relevant.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/210208754
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a
2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided
through a Realtek RTL8189FTV (no mainline driver, not supported).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Triggering a single defconfig or runtime test job can be handy:
- when adding or changing a defconfig;
- when adding or changing a runtime test case;
- when fixing some bug on a use case tested by a runtime test case.
Currently there are 3 subsets of jobs that can easily be triggered by
pushing a temporary branch with specific suffix:
- to trigger only the check-* jobs:
$ git push gitlab HEAD:<name> # currently 4 jobs
- to trigger all defconfigs and all check-* jobs:
$ git push gitlab HEAD:<name>-defconfigs # currently 197 jobs
- to trigger all runtime tests and all check-* jobs:
$ git push gitlab HEAD:<name>-runtime-tests # currently 118 jobs
When the user wants to trigger a single defconfig or runtime test job,
hand-editing the .gitlab-ci.yml and creating a temporary commit are
currently needed.
Add 2 more subsets that can be triggered based on the name of the
branch pushed.
- to trigger one defconfig job:
$ git push gitlab HEAD:<name>-<defconfig name> # currently 1 jobs
- to trigger one runtime job:
$ git push gitlab HEAD:<name>-<test case name> # currently 1 jobs
The check-* jobs are fast, so there is no need to add a per job trigger
for them. Also, they are anyway triggered with every push already.
While adding those new triggers, use the full name of the job as suffix.
This leads to large branch names:
$ git push gitlab HEAD:test1-tests.toolchain.test_external.TestExternalToolchainBuildrootuClibc
$ git push gitlab HEAD:test2-olimex_a20_olinuxino_lime_legacy_defconfig
But those branches are temporary, and this way the user doesn't need to
think much, just copy and paste the job name as suffix.
The hidden keys that now hold the commonalities between jobs does not
hold only a script anymore, so rename then from *_script to *_base.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Arnout: squash two patches]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The board is setup to track upstream Linux as the official
vendor support was complete(depricated) at 4.1 via NXP SDKs.
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to make the file easier to maintain, reorder the keys in a more
logical way:
Keep the docker image at the top.
Then all check-* jobs in the case-insensitive alphabetical order they
appear on Gitlab-CI pipeline results.
Then all keys related to defconfigs.
Finally all keys related to runtime tests.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This test allow to check if the xserver with GLX is working properly.
This is a basic test but it allow to trigger the current bug reported
by [1].
To test if the glxinfo test is working, you can change "-display :0" by
"-display :1" in the glxinfo command line.
[1] https://bugs.buildroot.org/show_bug.cgi?id=11591
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Youssef Harmouch <youssef.harmouch@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We recommend wrapping at 80 columns but we accept 132 columns when it
makes more readable.
When running flake8 locally, use maximum line length 80.
But when running in GitLab CI, keep the check-flake8 job failing only
for lines longer than 132.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This test is a simple "Hello, World" integration test of the OpenJDK
package.
It compiles the Java app on the host, then runs it on an emulated
AARCH64 target and verifies "Hello, World" is printed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The old 3.4 Linux kernel used by this defconfig doesn't build with gcc
7.x.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.
On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/165766194
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configuration contains:
- building tpl, spl and u-boot (forked u-boot repository)
- booting from SD card and network via PXE
- working ethernet, usb and uart
- minimal rootfs with busybox
- ready to flash SD card image
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace all YAML anchors with the new "extends" keyword because it is
more readable and more flexible (it works across configuration files
combined with the new "include" keyword).
Readability is more meaningful in .gitlab-ci.yml.in.
In the part of .gitlab-ci.yml that is auto-generated by 'make
.gitlab-ci.yml' keep the keyword in the same line of the job name.
So instead of this:
zynqmp_zcu106_defconfig:
extends: .defconfig
tests.boot.test_atf.TestATFAllwinner:
extends: .runtime_test
Use this:
zynqmp_zcu106_defconfig: { extends: .defconfig }
tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
Do this to to keep .gitlab-ci.yml easier to be post-processed by a
script.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Build for x86-64 as public containers in general are only available for
x86-64. Docker needs a number of kernel options enabled, so use a custom
kernel config based on the qemu one.
Docker needs entropy at startup, so enable the virtio-rng-pci device to
expose entropy to the guest. The default RAM amount (128M) is not enough to
run docker / docker-compose, so bump to 512MB.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All upcoming tests for git refs will rely on the return code of make to
determine whether a git ref can be downloaded or not and also to
determine whether the downloaded content is correct (all of this taking
advantage of the check-hash mechanism already in place for git
packages).
So to avoid false results i.e. in the case the check-hash mechanism
become broken in the master branch, add some sanity checks before the
actual test of download git refs.
Add the minimum test case for git refs containing only sanity checks.
Reuse the commit in the static repo.
Add a br2-external with two packages to check that:
- trying to download an invalid sha1 generates an error;
- downloading a valid sha1 that contains unexpected content generates
an error.
In order to ease the maintenance and review, each upcoming patch adding
checks to this test case will add at same time the commits to the static
repo, the equivalent packages to the br2-external and code to the test
case.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add one test case to ensure the hash is checked for git packages:
- correct hash;
- wrong hash;
- no hash file.
Add required infra:
- a GitRemote class, that can start a git server in the host machine to
emulate a remote git server under the control of the test;
- a new base class, called GitTestBase, that inherits from BRTest and
must be subclassed by all git test cases.
Its setUp() method takes care of configuring the build with a
br2-external, avoiding to hit http://sources.buildroot.net by using
an empty BR2_BACKUP_SITE. It also avoids downloading not
pre-installed dependencies (i.e. lzip) every time by calling 'make
dependencies' using the common dl directory, and it instantiates the
GitRemote object.
Besides the Python scripts, add some fixtures used during the tests:
- a br2-external (git-hash) with one package for each part of the test
case;
- a static git bare repo (repo.git) to be served using GitRemote class.
Neither the br2-external nor the check hash functionalities are the
subject of these tests per se, so for simplicity limit the check to the
error codes and don't look for the messages in the log.
Thanks to Arnout for the hint about how to add a bare repo to test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: split long line; reorder imports to satisfy flake8]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add initial support for Orangepi Lite2 board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi One Plus board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Buildroot's own .config file, as well as any package's .config file
(uclibc, linux, and busybox), for later inspection should a build fails,
notably due to changes in the kconfig-package infrastructure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
