The layout of the package is not amenable to building both the library
and the utilities at once, so this package will only install the
library.
The other apparmor-related tools however will almost all want to always
link with the static library (it's hard-coded in their Makefiles, like:
AALIB = -Wl,-Bstatic -lapparmor -Wl,-Bdynamic -lpthread), so we also
force the build of the static library.
The kernel headers 3.16 at least are required, for CAP_AUDIT_READ.
We need to force the C standard to gnu99, otherwise:
- autoconf uses wchar_t in C99 test, so considers it to be missing
on toolchains without wchar, but wchar is not otherwise needed for
libapparmor;
- c99 is not enough, otherwise the build fails with errors like:
kernel.c:503:15: error: expected declaration specifiers or ‘...’ before ‘(’ token
extern typeof((__change_hat)) __old_change_hat __attribute__((alias ("__change_hat")));
^
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: strip down the patch to only build the lib]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
This is a duplicate of python-pyasn1.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rhys has asked through private e-mail to be removed:
==
Please can I be removed as the developer, as I’m not longer involved.
Cheers Rhys
==
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Official ALSA Python binding, including hardware management, mixer and
sequencer control.
http://www.alsa-project.org/
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add support for the low cost QMTECH XC7Z010 starter kit
board [1].
[1] http://www.chinaqmtech.com/xilinx_zynq_soc
Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This project is an implementation of the TCG TPM 2.0 specification. It
is based on the TPM specification Parts 3 and 4 source code donated by
Microsoft, with additional files to complete the implementation.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
exFAT filesystem userspace utilities
We need a patch to fix:
error: unknown type name ‘ssize_t’
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package is separated from the regular libfuse package, as it
contains new API (and can co-exist with libfuse).
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a duplicate of python-pyasn1-modules.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Apcupsd is a UPS control system that permits orderly shutdown of your
computer in the event of a power failure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the nanopi_neo4 was added in
d1cd9cdf26, but then removed in
8af7b11bd8 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.
Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.
Compared to the previous defconfig, the following changes were done:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig supports the OLPC XO-1 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are muliple generations of OLPC laptops, x86 ones based on
Geode, VIA and ARM based with Marvell Armada. All of boot with
OpenFirmware and share some peripherals.
This patch adds the common files.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas: add PSF-2.0 to the licenses and LICENSE.PSF to the license files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkcs11-helper is a library that simplifies the interaction with
PKCS#11 providers for end-user applications. Pkcs11-helper allows
using multiple PKCS#11 providers at the same time, enumerating
available token certificates, or selecting a certificate directly by
serialized id, handling card removal and card insert events, handling
card re-insert to a different slot, supporting session expiration and
much more all using a simple API.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python library for the snappy compression library from Google.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pure Python CBOR (de)serializer with extensive tag support.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Python implementation of the CANopen standard.
Signed-off-by: Attila Wagner <attila.wagner@onyxinsight.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upcoming release of kodi 19.0 will add libudfread as optional
dependency: https://github.com/xbmc/xbmc/pull/17612
Please note that the removed support of libudf was added on the master
branch so we do not need to backport udf support to kodi 18.x:
558b54a79e
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Unbound: validating, recursive & caching DNS resolver with
DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- be more explicit with SSL options
- drop logic around luainterpreter since luajit is not properly
detected]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
jbig2dec is a decoder implementation of the JBIG2 image compression format.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since spice ver. 0.12.6 doesn't depend on cegui anymore
let's bump to the latest stable version and rename package.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of AArch64 platforms need to build some bits of ARM32 code,
for example in TF-A (ARM Trusted Firmware) or other
firmware/bootloader.
This package allows to get a pre-built cross-compilation toolchain to
build bare-metal ARM32 code.
https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
[Thomas:
- drop empty LICENSE_FILES
- use VERSION variable in SITE variable
- simplify symlink creation
- drop visible Config.in.host option]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 25033cfb86.
This perl package is deprecated and gives following recommendations while
building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisites
IO::Socket::SSL which is automatically used by LWP::UserAgent unless
this preference is overridden separately. IO::Socket::SSL is a more
complete implementation, and, crucially, it allows hostname
verification. Crypt::SSLeay does not support this. At this point,
Crypt::SSLeay is maintained to support existing software that already
depends on it.
However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability of LWP::UserAgent class to
communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::https and its dependencies, and do not explicitly use
Net::SSL before loading LWP::UserAgent, or override the default socket
class, you are probably using IO::Socket::SSL and do not really need
Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a
dependency on LWP::Protocol::https.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Always use the --disable-dbengine configuration option, because we do
not support libjudy dependency that is required otherwise.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a single module, which implements
a platform independent file lock in Python, which provides
a simple way of inter-process communication.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A simple interface to SFTP. The module offers high level
abstractions and task based routines to handle your SFTP
needs.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- add -DRTTY_SSL_SUPPORT=OFF to explicitly disable SSL support
- fix license file name in the hash file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case runs a simple pipeline for 100 frames to ensure that
gst1-python works properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GStreamer Python binding overrides.
This package also includes a simple upstream patch that fixes building against
python-3.8.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix libpython-dir as noticed by Adam
- rewrap a comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is needed with Freescale i.MX8/i.MX8X defconfigs
version equal to 4.19.35_1.0.0
It is also subject to multi-version support.
The package version aligned with NXP BSP 4.19.35_1.1.0 is 2.3.1
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds EROFS userspace tool erofs-utils to buildroot,
which can be used to generate EROFS images.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- add explicit --enable-lz4
- explain why autoreconf
- add DEVELOPPER entry
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tinyproxy is a small, efficient HTTP/SSL proxy daemon.
https://tinyproxy.github.io
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file was created by utils/scancpan while adding other packages but
apparently not yet added in the repo.
Assign this test case to Bernd in the DEVELOPERS file since he is
listed as the maintainer for this package.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding a host dependency to perl-try-tiny and
target dependency to openssl.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in a subsequent commit)
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in subsequent commit).
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency for perl-lwp-protocol-https (added in a subsequent
patch).
Added via utils/scancpan, updating license only.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note: even though the Chart.js developers make specific tarballs on GitHub
(i.e. not simply 'source code' tarballs), they cannot be used in Buildroot
because their names do not encode a version number, e.g. 'Chart.js.zip'.
This means that on upgrades, the same tarball name would have different
contents and thus a different hash.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding README.pod as license file and updating
license to Artistic-2.0.
Note that the license declared in META.{json,yml} ('perl') would mean either
Artistic or GPL-1.0, while the README.pod file only talks about
Artistic-2.0. Assume the author means the latter one.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, but removing the 'suspicious' dependency on
'host-perl-mojolicious'.
During configuration, the package warns:
Checking prerequisites...
requires:
! Mojo::Base is not installed
build_requires:
! Mojolicious::Lite is not installed
! Test::Mojo is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Run 'Build installdeps' to install missing prerequisites.
But the build and installation continues correctly nonetheless.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency of perl-i18n added in a subsequent patch.
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Convert the package to a meson package.
- Remove 0001-add-PYTHON_INCLUDES-override.patch as it no longer applies.
- Add gobject-introspection as a dependency.
- Add the package under myself in the DEVELOPERS file.
Because gobject-introspection is now a dependency of python-gobject, the test
must be updated at the same time.
- Change TestPythonPy2Gobject to TestPythonPy3Gobject as
gobject-introspection requires python3.
- Refactor test_python_gobject.py to no longer inherit the
TestPythonPackageBase class, as this class uses a base config that does not
support gobject-introspection.
- Update sample_python_gobject to use Glib to find the path of sh.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Belr is Belledonne Communications' language recognition library, written
in C++11. It parses text inputs formatted according to a language
defined by an ABNF grammar, such as the protocols standardized at IETF.
https://gitlab.linphone.org/BC/public/belr
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Belle-sip is a modern library implementing SIP (RFC 3261) transport,
transaction and dialog layers.
http://www.linphone.org/technical-corner/belle-sip
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: select mbedtls as support for crypto is needed in bctoolbox]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BearSSL is an implementation of the SSL/TLS protocol (RFC 5246) written
in C
https://bearssl.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gentoo scripts to initialize udev via openrc, to be used by eudev.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: fix commit title]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GObject introspection is a middleware layer between C
libraries (using GObject) and language bindings. The C library
can be scanned at compile time and generate a metadata file,
in addition to the actual native C library. Then at runtime,
language bindings can read this metadata and automatically
provide bindings to call into the C library.
There's an XML format called GIR used by GObject-Introspection.
The purpose of it is to provide a standard structure to access the complete
available API that a library or other unit of code exports. It's
language-agnostic using namespaces to separate core, language, or
library-specific functionality.
Cross-compiling gobject-introspection is not an easy task. The main issue is
that in the process of creating the XML files, gobject-introspection must first
run and scan the binary, which, if the binary is cross-compiled, would not
typically be possible from the host system.
Because of this limitation, we use several wrappers to call instead first out
qemu, which runs the native scanner to create the binaries.
There are seven total patches and four different wrapper files needed to
successfully cross-compile and run this package, many of them are from
open-embedded, but one of them is of my own doing.
1) Revert a previous, incomplete attempt at adding cross-compiling support.
2) Add support for cross-compiling with meson.
3) Disable tests.
4) Add an option to use a binary wrapper; this patch will force giscanner to
use a wrapper executable to run binaries it's producing, instead of
attempting to run them from the host.
5) Add an option to use an LDD wrapper, again, useful for cross-compiled
environments.
6) Add a --lib-dirs-envar option to pass to giscanner. (See patch for details.)
7) Add rpath-links to ccompiler: when passing the PACKAGE_GIR_EXTRA_LIBS_PATH
to the ccompiler.py script, ccompiler.py needs to add -Wl,-rpath-link to the
environment for the package to correctly link against the passed on paths.
8) Ignore error return codes from ldd-wrapper because prelink-rtld returns 127
when it can't find a library, which breaks subprocess.check_output().
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- host-prelink-cross has no Kconfig entry
- reorder dependencies for arch deps first
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Prelink-cross emulates a runtime linker for a given sysroot. This is
necessary to allow gobject-introspection to build its typelib files
during cross-compiling.
We're using a sha1 on the cross_prelink branch, as we need the
RTLD-enabled variant of prelink-cross.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop HOST_ prefix for inherited variables
- fix licensing info to "or-later"
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages, like prelink-cross, want to use libiberty but do not bundle
their own instance (which is good!).
However, libiberty is made for being bundled in packages: all GNU
packages that use libiberty (gcc, Binutils, gdb, et al...) all have their own
bundled variant. This common practice means that there is no official upstream
for libiberty, the closest being as part of the combined Binutils-gdb tree.
So we introduce a new host-only package, that installs just libiberty from a
Binutils released tarball.
Again, as packages usually bundle libiberty, it usually only installs a static
version. Furthermore, it does not obey the usual --enable-shared and
--disable-static flags; it only ever builds a static version.
Furthermore, -fPIC is not used with this library, but some packages may pick it
to build shared objects. This behavior is the case for host-gdb, for example,
which accidentally picks that library instead of its internal one.
So, rather than fix the various gdb versions and variants we can use, we ensure
that the libiberty we install is usable in shared objects, and we always build
before host-gdb.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix DL_SUBDIR for a host-only package
- add licensing info
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
openFPGALoader is a tool for programming FPGA.
Signed-off-by: Jean Burgat <jeanburgat33@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The first time I worked on the Buildroot's toolchain infra
was to add support for the Sourcery Codebench Standard
(licenced) edition toolchain (from Mentor Graphics) for
x86 target [1]. The series was rejected though.
But the knowledge gained from this work served to refactor
the toolchain-external infra in Buildroot [2].
Nowadays, I'm using toolchains-builder project to do
some toolchain build testing to keep GNU tools up to date
in Buildroot.
[1] http://lists.busybox.net/pipermail/buildroot/2014-November/112036.html
[2] http://lists.busybox.net/pipermail/buildroot/2016-October/175433.html
[3] https://gitlab.com/kubu93/toolchains-builder/
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gstreamer 0.10 has been deprecated upstream since 2012 and is missing a lot
of features and (security) fixes compared to gstreamer1, so remove it.
All gstreamer-0.10 sub packages depends on gstreamer, so we only need to add
a legacy entry for that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GLSL Sandbox standalone player allow one to run and render
(most of) nice shaders available online on the
http://glslsandbox.com/ website, but without the need of an
Internet connection, a web browser or any of its
dependencies. Instead, the only requirement of
glslsandbox-player is a working EGL and GLESv2 libraries.
This package is useful for stressing and testing GLES shader
compiler in GPU drivers.
https://github.com/jolivain/glslsandbox-player
Signed-off-by: Julien Olivain <juju@cotds.org>
[Arnout: add dependency on threads and make BUSYBOX_SHOW_OTHERS
conditional]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This also adds the new tests to the gitlab CI configuration.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
elixir is required to build RabbitMQ starting from v3.7
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides an OpenVPN plugin for network manager.
Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com>
[Peter: add Config.in, DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BlueZ 4.x is deprecated since a long time (BlueZ 5.x has been released
in 2012) so drop it.
For cwiid, sconeserver and ussp-push, replace bluez_utils by
bluez5_utils. All other packages already support bluez5_utils so just
drop bluez_utils.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Validates an archive can be installed and removed
- Builds an archives that uses postinst and prerm scripts
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The RocksDB library provides a persistent key value store. Keys and
values are arbitrary byte arrays. The keys are ordered within the key
value store according to a user-specified comparator function.
The library is maintained by the Facebook Database Engineering Team, and
is based on LevelDB, by Sanjay Ghemawat and Jeff Dean at Google.
http://rocksdb.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add myself as DEVELOPER, as waf is currently orphan,
and I am the last one to fiddle with it.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The name of the package diverges slightly from upstream to maintain
consistency with other nginx modules already present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency on !BR2_STATIC_LIBS is due to missing Libs.private in the
libmodconfig pkg-config file making builds that statically link against
libmodsecurity fail.
Lua is disabled due to using the host libraries.
Yajl is disabled as enabling it forces the tests to be built. These tests have a
hard dependency on libmodsecurity.a which is not built when --disable-static is
used in the configuration. There is no flag to disable these tests.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ptm2human is a decoder for trace data outputted by Program
Trace Macrocell (PTM) and Embedded Trace Macrocell (ETMv4).
It deconstructs ID packets and data packets from the
formatter of ARM Coresight ETB, and then translates the
trace data to a human-readable format.
./utils/test-pkg --package ptm2human --all
44 builds, 29 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien Olivain <juju@cotds.org>
[yann.morin.1998@free.fr:
- drop the host variant
- introduce _ARCH_SUPPORTS
- comment why we need autoreconf
- drop spurious empty line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
His e-mail address is bouncing:
Your message to bachmann@tofwerk.com couldn't be delivered.
bachmann wasn't found at tofwerk.com.
thomas.petazzoni Office 365 bachmann
Action Required Recipient
Unknown To address
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address is bouncing:
----- The following addresses had permanent fatal errors -----
<sbobroff@linux.ibm.com>
(reason: 550 5.1.1 <sbobroff@linux.ibm.com>: Recipient address rejected: User unknown in local recipient table)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove celt051 package as celt has been merged into the IETF Opus codec
and is now obsolete (see http://celt-codec.org/).
The only reverse dependency of celt051 is spice. Opus support on spice
has been added upstream 6 years ago with:
ce9b714137
Spice disabled celt by default since version 0.14.1 and:
72b0d603e1
Spice evens error out, by default, if Opus is missing but not explicitly
disabeld since:
f522473842
This will also fix a static build failure on spice with celt051 and opus.
Fixes:
- http://autobuild.buildroot.org/results/96c786f85d35f33508e9c71778043d16b87f72cd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: slight rephrasing in legacy help]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A library to abstract stream I/O like serial port, TCP, telnet, UDP,
SSL, IPMI SOL, etc.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: explain why we need to unconditionally pass --with-openssl]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
