- Drop second and third patches (alredy in version)
- Add mitigation against an ECDSA timing attack. [T4626,CVE-2019-13627]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 26daf383f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libgrypt provides a config file `libgcrypt-config`. After the version
bump to 1.8.4 upstream added a pkg-config file as well [1].
Using the pkg-config file is preferred over using the package provided
config file. For example, the Meson build system requires that for every
special config file an entry is added to the `[binary]` section in the
cross-compilation.conf file, otherwise it will use the config file found
in `PATH`. This is bad when cross-compiling as `PATH` will include
pathes to the host and therefore Meson will wrongly use the host config
file.
To simplify using libgcrypt for packages using the meson infrastructure
lets add the pkg-config file.
Note, that the additional upstream patch 0003 fixes a typo in the pkg-config
file.
[1] 97194b422b
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 624eb111e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The `ac_cv_sys_symbol_underscore` reconfigure patch was added to
Buildroot back in 2007 [1], but was not reported to upstream back then.
Meanwhile, the issue has been fixed upstream [2] after the version bump to
version 1.8.4.
In order to add another upstream patch, which will add a pkg-config file
for libgrypt and therefore requires autoreconfiguration as well, replace the
current patch with the upstream patch.
[1] https://git.buildroot.net/buildroot/commit/package/libgcrypt?id=f1bcdf518fa7868b7819b0248f4b8da02a954dde
[2] 0f4545b441
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0da00ddc8c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent versions of ncurses now have the license information in a
separate file called COPYING.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 40de427a63)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Joe changed the COPYING file from GPL-1.0 to GPL-2.0 in the development
leading up to 3.8:
d731f9b379/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 0d26068b38)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes WARNINGs in make legal-info of the kind:
WARNING: kf5-extra-cmake-modules-5.47.0: cannot save license
(KF5_EXTRA_CMAKE_MODULES_LICENSE_FILES not defined)
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a6c594b8dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The source files contain the "(at your option) any later version" text, so
change the licese to GPL-2.0+.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f58ea370da)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The source files contain the "(at your option) any later version" text and
the website states:
License
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
http://0pointer.de/lennart/projects/ifplugd/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d8c2d82d7a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which is the version used by docker 18.09.9:
0a3767c7e9
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 02e2fe2eca)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Includes a number of post-18.09.7 bugfixes and to keep in sync with the
docker-engine version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c5568f9985)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2019-13509: Docker Engine in debug mode may sometimes add secrets to the
debug log. This applies to a scenario where docker stack deploy is run to
redeploy a stack that includes (non external) secrets. It potentially
applies to other API users of the stack API if they resend the secret.
And a number of other non-security issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1d1fb619f9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch used previously to support versions of ln lacking the '-r'
option generated broken links:
$ file target/usr/lib/cups/backend/driverless
target/usr/lib/cups/backend/driverless: broken symbolic link to ../../usr/lib/cups/driver/driverless
Add a squashing of two patches already applied upstream that provide a
better solution:
https://github.com/OpenPrinting/cups-filters/pull/154https://github.com/OpenPrinting/cups-filters/pull/157
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f80ec7963a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
texttotext must be linked to libiconv if !BR2_ENABLE_LOCALE so pull a
patch applied upstream that adds libiconv discovery via autoconf.
With this change, autoreconf requires the config.rpath and ABOUT-NLS
files which are not in v1.25.4. Add a pre-configure hook to fake them.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5376b4b4e3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With Microblaze Gcc version < 8.x the build hangs due to gcc bug
85180: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85180. The bug
shows up when building protobuf with optimization but not when building
with -O0. To work around this, if BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y we
force using -O0.
Fixes:
http://autobuild.buildroot.net/results/73dc9610a13d6e14eec58d529617210d93d5dec4/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Arnout: fix variable name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e975f1cbef)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a newer host system cmake to build MariaDB, the following build
error occurs:
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11781
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c2ff8c63da)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mariadb no longer allows the WITH_SSL=OFF configure option. It will
instead search for openssl or gnutls headers, and if missing error out
with:
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find GnuTLS (missing: GNUTLS_LIBRARY GNUTLS_INCLUDE_DIR)
(Required is at least version "3.3.24")
Call Stack (most recent call first):
/usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake/Modules/FindGnuTLS.cmake:54 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
libmariadb/CMakeLists.txt:298 (FIND_PACKAGE)
Therefore, make host-mariadb depend on host-openssl, and tell mariadb
to use the system openssl.
This was not found by autobuilders because mariadb isn't built in the
autobuilders (it's part of a choice).
Note that the target mariadb already has an unconditional dependency
on openssl.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit fca2e83768)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
2.7.12:
- Fix a missing error detection in ECJPAKE. This could have caused a
predictable shared secret if a hardware accelerator failed and the other
side of the key exchange had a similar bug.
- When writing a private EC key, use a constant size for the private value,
as specified in RFC 5915. Previously, the value was written as an ASN.1
INTEGER, which caused the size of the key to leak about 1 bit of
information on average and could cause the value to be 1 byte too large
for the output buffer.
- The deterministic ECDSA calculation reused the scheme's HMAC-DRBG to
implement blinding. Because of this for the same key and message the same
blinding value was generated. This reduced the effectiveness of the
countermeasure and leaked information about the private key through side
channels. Reported by Jack Lloyd.
2.7.11:
- Make mbedtls_ecdh_get_params return an error if the second key belongs to
a different group from the first. Before, if an application passed keys
that belonged to different group, the first key's data was interpreted
according to the second group, which could lead to either an error or a
meaningless output from mbedtls_ecdh_get_params. In the latter case, this
could expose at most 5 bits of the private key.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Remove all patches except first one (already in version)
- Update first patch
- Fix CVE-2019-6471: A race condition when discarding malformed packets
can cause BIND to exit with an assertion failure
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 395ad387e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am exclusively using my Gmail address for now on. Reflect this in
the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 916497d7d5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mathieu is no longer working at Savoir-faire Linux, update his email
address in the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fd7f37606d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a backportport of c5c106e4e3 into 2019.02
If a client sends a SUBSCRIBE packet containing a topic that consists of
approximately 65400 or more '/' characters, i.e. the topic hierarchy
separator, then a stack overflow will occur.
The issue is fixed in Mosquitto 1.6.6 and 1.5.9. Patches for older versions
are available at https://mosquitto.org/files/cve/2019-hier
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This would normally be enabled by systemctl preset-all however since we
don't have a host systemctl we need to enable the service manually.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b81e00e2ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Keep listing the test infra so the developer is included in reviews, but
trim the list of tests to those the developer are most interested in.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 10acb4ff6d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The JSON::PP Perl module is used at build time by the webkitgtk and
wpewebkit packages.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e0c879509d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- ECDSA remote timing attack (CVE-2019-1547)
Severity: Low
- Fork Protection (CVE-2019-1549)
Severity: Low
- Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
Severity: Low
For more details, see the advisory:
https://www.openssl.org/news/secadv/20190910.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 99a2f0dd6a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the SYSV init script allow /etc/default/vmtoolsd to override $ARGS
(if it present)
Signed-off-by: Simon Rowe <simon.rowe@citrix.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3d104ce719)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2019-15903: In libexpat before 2.2.8, crafted XML input could fool the
parser into changing from DTD parsing to document parsing too early; a
consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber)
then resulted in a heap-based buffer over-read.
While we're at it, also change to use .tar.xz rather than the bigger
.tar.bz2.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 386794d02e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc-ng don't build with gcc 9.1 [1] on sparc due to a new check
that "catch illegal asm constraint usage" [2]. This issue has been
fixed in upstream uclibc-ng, so we simply backport the fix.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Thomas: backport the patch that was applied to upstream uclibc-ng]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 08d25f3942)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They are required by the default udev rules.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12141
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0aa6634318)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Useful for test purposes when we want to install util-linux with a
custom TARGET_DIR, e.g.
$ make util-linux-reinstall TARGET_DIR=/tmp/util-linux
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 40af3a6661)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create the configuration file as /etc/thttpd.conf, as expected by the
systemd unit file.
This matches other web server packages that install configuration files
at /etc/lighttpd/, /etc/apache2, etc.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 349501320b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The init script provided by thttpd is for FreeBSD. Add a custom one,
made specifically for Buildroot.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fc7488e99f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dc82013bf5)
[Peter: drop 5.2.x bump]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2019-9511 "Data Dribble": The attacker requests a large amount of data
from a specified resource over multiple streams. They manipulate window
size and stream priority to force the server to queue the data in 1-byte
chunks. Depending on how efficiently this data is queued, this can
consume excess CPU, memory, or both, potentially leading to a denial of
service.
- CVE-2019-9512 "Ping Flood": The attacker sends continual pings to an
HTTP/2 peer, causing the peer to build an internal queue of responses.
Depending on how efficiently this data is queued, this can consume excess
CPU, memory, or both, potentially leading to a denial of service.
- CVE-2019-9513 "Resource Loop": The attacker creates multiple request
streams and continually shuffles the priority of the streams in a way that
causes substantial churn to the priority tree. This can consume excess
CPU, potentially leading to a denial of service.
- CVE-2019-9514 "Reset Flood": The attacker opens a number of streams and
sends an invalid request over each stream that should solicit a stream of
RST_STREAM frames from the peer. Depending on how the peer queues the
RST_STREAM frames, this can consume excess memory, CPU, or both,
potentially leading to a denial of service.
- CVE-2019-9515 "Settings Flood": The attacker sends a stream of SETTINGS
frames to the peer. Since the RFC requires that the peer reply with one
acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost
equivalent in behavior to a ping. Depending on how efficiently this data
is queued, this can consume excess CPU, memory, or both, potentially
leading to a denial of service.
- CVE-2019-9516 "0-Length Headers Leak": The attacker sends a stream of
headers with a 0-length header name and 0-length header value, optionally
Huffman encoded into 1-byte or greater headers. Some implementations
allocate memory for these headers and keep the allocation alive until the
session dies. This can consume excess memory, potentially leading to a
denial of service.
- CVE-2019-9517 "Internal Data Buffering": The attacker opens the HTTP/2
window so the peer can send without constraint; however, they leave the
TCP window closed so the peer cannot actually write (many of) the bytes on
the wire. The attacker then sends a stream of requests for a large
response object. Depending on how the servers queue the responses, this
can consume excess memory, CPU, or both, potentially leading to a denial
of service.
- CVE-2019-9518 "Empty Frames Flood": The attacker sends a stream of frames
with an empty payload and without the end-of-stream flag. These frames
can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends
time processing each frame disproportionate to attack bandwidth. This can
consume excess CPU, potentially leading to a denial of service.
(Discovered by Piotr Sikora of Google)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9a52e173b5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2019-9511: Data Dribble
CVE-2019-9513: Resource Loop
For details, see the advisory:
https://nghttp2.org/blog/2019/08/19/nghttp2-v1-39-2/
Notice that libnghttp2 itself is not affected by these vulnerabilities, only
nghttpx and nghttpd (which are currently not built).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4c7e7acbe4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bd52cb76b0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/a6247b95f1578fe1daec485589582310c75b5d84/
luksmeta-v9 generates man pages at build if a2x is available since:
commit 3fa51bb22350fee101fc52044949f6eb394114ae
Author: Daniel Kopeček <dkopecek@redhat.com>
Date: Fri Jul 13 01:52:45 2018 +0200
Generate manual page from source during build time
If a2x (asciidoc) is not available during configure time,
a warning will be generated and the manual page wont be
generated nor installed.
Man pages are not needed on target and the build step fails in certain
setups, so disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0471f650b1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
