Fixes a number of buffer overflows / use-after-free issues:
http://git.imagemagick.org/repos/ImageMagick/blob/master/ChangeLog
* Prevent buffer overflow in BMP & SGI coders (bug report from
pwchen&rayzhong of tencent).
* Prevent buffer overflow and other problems in SIXEL, PDB, MAP, TIFF and
CALS coders (bug report from Donghai Zhu).
* Prevent buffer overflow (bug report from Max Thrane).
* Prevent memory use after free (reference
https://www.imagemagick.org/discourse-server/viewtopic.php?f=3&t=30245).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default boa.conf we install specifies that boa should run under the
nobody group, but we don't have such a group in our default skeleton (and
boa doesn't add it), causing boa to fail to start:
[01/Jan/1970:00:00:10 +0000] No such group: nobody
Instead use the nogroup group, which is presumably what was meant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configure.ac has AM_GNU_GETTEXT(), which will enable i18n if a gettext
library is found. For uClibc, it is found if the gettext package has
been built, and it will add -lintl to the link flags. For musl and
glibc, it is always found, in libc itself so nothing is added to the
link flags.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Matthew Weber <matt@thewebers.ws>
Tested-by: Matthew Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The source files in the domoticz tarballs have DOS line endings, which
don't appear when fetching the source code from Git. Therefore, a patch
generated from the Git repository doesn't apply directly on the source
code extracted from the tarball.
This commit fixes the patch so that it applies cleanly to the
tarball. Notice that the CMakeLists.txt file is not affected, only the
domoticz.cpp file uses DOS line endings.
While we're at it, we change the patch title prefix from [PATCH 1/1] to
just [PATCH].
Fixes:
http://autobuild.buildroot.net/results/a0539b3551d482411dd4bcd5c9b8c89f77e68475/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump runc to cc29e3dded8e27ba8f65738f40d251c885030a28
This version is required by Docker Engine v1.12.0.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6ad14a3687)
Bump docker-engine to the latest stable v1.12.0 from v1.12.0-rc3.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f892015d78)
domoticz.cpp currently assumes that on GNU/Linux systems header
<execinfo.h> is available. But that is not true. Since it provided by
C library and uClibc can be built without backtrace support. And in
such cases we get following build error.
domoticz-3.4834/main/domoticz.cpp:48:22: fatal error: execinfo.h: No such file or directory
#include <execinfo.h>
^
compilation terminated.
This commit adds patch for detecting presence of <execinfo.h>
and guards code accordingly.
Fixes:
http://autobuild.buildroot.net/results/393/393f839e160b51ca12ac36058718ad2f0c1b50a6/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When commit 031130a4 added the dependency on shared libs for FIT support
in uboot-tools, the dependency of the comment was added exactly as the
dependency of the symbol.
That means the comment is shown when FIT support is possible, and hidden
when it is not, while we want it the other way around...
Fix the dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The reproducible build is only in its infancy; it is far from being
complete.
As such, move it to the "advanced" build sub-menu, where it belong for
now...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libbsd installs at least one .pc file that contains a -isystem include
path (-isystem /usr.include/bsd), but -isystem is not munged by
pkg-config, so we end up using /usr/include/bsd which is not suitable
for the target. And breaks big time (see failures, below).
But using libbsd is completely optional. In fact, our lldpd.mk did not
even express the dependency on libbsd, so we may well have had builds
without libbsd.
The functionality brought in by using libbsd is very minor (just setting
the neighbour name in /proc/self/cmdline), so we just make lldpd not use
libbsd at all. There is no --disable-libbsd or such, so we just patch it
out of configure.ac.
Fixes:
http://autobuild.buildroot.org/results/6b7/6b70fa379e834ec71cc260ba6af771b531ca3511/http://autobuild.buildroot.org/results/769/769074c4bb67336ae6679f2c1cd2a8220d2bec24/http://autobuild.buildroot.org/results/c8a/c8a6001f437701ecc75f6c9252935645bda8a8c8/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_BINFMT_FLAT_SEP_DATA can be used to create XIP userland and works fine
for m68k. Unfortunately a lot of basic packages as pcre are not compileable
because of a CPU or hardware limitation. The reason for failing are very
big functions used in the libraries or application code.
Typical errors are:
Fatal error: Tried to convert PC relative branch to absolute jump
or
error: value -yyyyy out of range
Add kernel patch from 4ec5542679 to make
BR2_BINFMT_FLAT_ONE compiled firmware work fine.
Fixes:
http://autobuild.buildroot.net/results/20b/20b1586757450d6aad8583ad7a787a7ca11acef1/http://autobuild.buildroot.net/results/d31/d311955ada1ffcd7f69e82965c8fe33eabe488cd/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment in Config.in file about sep-data existing on m68k,
but being disabled due to build issues with numerous packages.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64_efi reference defconfig is targeted towards an EFI
environment but the kernel which comes with it does not enable EFI
support by default.
Booting this defconfig without kernel EFI support on a qemu virtual
machine with EFI firmware resulted in no output to tty1 or ttyS0.
Enabling EFI support in the kernel fixed this and seems saner for an EFI
reference Buildroot defconfig.
Adding CONFIG_EFI to board/pc/linux-extras.config also affects
pc_x86_64_bios_defconfig which doesn't require it, however it was
observed that the extra overhead is small and so this is preferred
rather than having a separate config file.
This was tested with qemu 2.6.0 running with kvm enabled and firmware
EFI v2.60 by EDK II. Also built and verified bios defconfig on the same
setup but with BIOS firmware instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Older toolchains that use binutils <= 2.23.2 are affected by binutils
bug #14887 (https://sourceware.org/bugzilla/show_bug.cgi?id=14887),
where:
someinstruction [ foo, something ]
is not accepted, due to the whitespace after [ and before ], causing the
following build failures for OpenBLAS:
ARM register expected -- `pld [ r1,#512 ]'
Since we don't have any mechanism to add dependencies on binutils
versions, we work around this problem by patching the code to remove the
problematic whitespaces. As there are many many instances of this in the
ARM assembly code of OpenBLAS, we use a sed expression to make this
modification rather than a patch.
Fixes:
http://autobuild.buildroot.net/results/43e50b480b4aea0fdec745d7875c85377c114cac/
[Peter: use single quotes in sed invocation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise the build fail with this error:
configure.in:53: error: possibly undefined macro: AC_MSG_ERROR
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:95: error: possibly undefined macro: AM_CONDITIONAL
Also, there is a PKG_CHECK_MODULES used for GTK.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The instructions listed sdcard.img as output image name but
board/pc/genimage-*.cfg generate it named as disk.img instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses buildsystem does not recognise 'uclinux' as being a 'linux',
so it falls back to generic checks, especially when trying to decide
what macros to define. So it misses defining absolutely required macros
when doing widechar, which break the bui,d.
But 'uclinux' is just a 'linux' like any other in this respect.
We fix both aclocal.m4 and the generated ./configure script because
ncurses does not autoreconf correctly (see comment in 0001-*.patch).
Fixes:
http://autobuild.buildroot.org/results/d5c/d5c787d34acbfc0c0c7bd8cc0e15b5bc2460d88a/http://autobuild.buildroot.org/results/fc4/fc4b41fb955c390913a879e0202760347ce29987/
[...too many to list...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pinentry currently fails to build with gcc 5.x, because it uses some
functionality from std::string that requires C++11 without passing the
appropriate -std= value. We fix this by passing a proper -std= option
when gcc >= 5.x. Note that this can be removed once pinentry is bumped
to the newest version (currently 0.9.7) because they no longer use
std::string in the Qt part.
Fixes:
http://autobuild.buildroot.net/results/6ea64f692acaebc4d58f3371c632b5121500f17e/
(and many, many similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One-beer-granted-to: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise the configure script will probe the distro directories for it
and it may not match what we use, for example fedora uses /etc/pki
instead of /etc/ssl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version brings in several bug fixes: one of which partially
addresses Buildroot autobuilder failures for static configurations.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some older versions of glibc, clock_gettime() is in librt, so we need
to link with librt when clock_gettime() is used. This commit adds a
lirc-tools patch to make sure we link with librt when needed.
Fixes:
http://autobuild.buildroot.net/results/2770360880c9b265c8e019141925e56c35ba22dc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the SourceForge page still exists, it seems to be a bit outdated,
and there is now a much newer Github repository with recent activity, so
mention it as well in the Config.in help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The three patches allow to compile applications using TLS emulation from
libgcc or C++ applications.
The patches 892-libgcc-mkmap-symver-support-skip_underscore.patch and
893-libgcc-config-bfin-use-the-generic-linker-version-in.patch fixes how
libgcc is generated, by making the necessary libgcc symbols declared
"GLOBAL", and therefore visible outside of libgcc. This fixes a large
number of undefined reference issues (for either C++ applications or
applications using TLS emulation). This was reported as gcc PR74748.
The patch 894-libgcc-fix-DWARF-compilation-with-FDPIC-targets.patch
allows to build DWARF in FDPIC mode. This patch replaces the older
892-disable-dwarf-bfin.patch, as instead of disabling DWARF support, it
fixes it. This was reported as gcc PR68468.
In order to get C++ working without unresolved symbols, we also need to
disable symbol versioning (--disable-symvers). This is a remaining issue
in gcc which will be investigated at a later point.
Since this commit fixes C++ support in Blackfin, it re-enables the
selection of C++ support for this architecture.
Fixes:
(alsa-lib emutls)
http://autobuild.buildroot.net/results/8544ce58d75820666579db93a25ca5656a8efa8e/
(cairo emutls)
http://autobuild.buildroot.net/results/88b02a5dd5408318941ccbfcea0a9cbaa331500a/
(audiofile c++)
http://autobuild.buildroot.net/results/394e530c5dcd9ccb590eb151aeaadb37d11e0e39/
(assimp c++)
http://autobuild.buildroot.net/results/01f4be126c2d786a5ad7f220c2cf60539888a480/
(bellagio c++)
http://autobuild.buildroot.net/results/ada/ada44228bf13ec05382275bd6571396f5ba2b1f7/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
