Update LICENSE.adoc: change was zlib and year bump.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libXdmcp configure script uses pkg-config, but the Buildroot
package does not depend on host-pkgconf. This is not seen by the
autobuilders most likely because another package that is always built
before libXdmcp builds pkg-config.
However, running:
$ make xlib_libXdmcp
triggers the following build failure:
checking pkg-config is at least version 0.9.0... ./configure: line 12323: /home/thomas/projets/buildroot/output/host/bin/pkg-config: No such file or directory
no
[...]
checking for XDMCP... configure: error: in `/home/thomas/projets/buildroot/output/build/xlib_libXdmcp-1.1.2':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
This was detected using per-package target/host folders, because with
this, only the dependencies explicitly expressed by a package are
available to the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Move to cmake infrastructure
- Do not enforce zlib dependency
- Add optional bzip2 dependency
- Add mandatory host-pkgconf and libbsd dependency
- Remove miniunzip from Config.in, miniunzip (miniunz) has been merged
with minizip:
a66cc31fac
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The woff2 dependency is used to support Web fonts in WOFF2 format.
This is a Web-facing feature that Web sites expect WebKit to support,
and it is recommended to be unconditionally enabled. While it is
possible to disable the feature at build time, upstream only recommends
doing so if the target system cannot provide a woff2 package.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If libglib2 is not found or disable through --without-glib2, irqbalance
will use its own implementation of glib2 so add a mandatory libglib2
dependency especially as upstream now enforce it:
1d2f6a9b6c
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure script of xutil_makedepend uses PKG_CHECK_MODULES(), so
it should depend on host-pkgconf. Otherwise, a "make
host-xutil_makedepend" fails with:
"""
checking for X... configure: error: in `/home/thomas/projets/buildroot/output/build/host-xutil_makedepend-1.0.5':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables X_CFLAGS
and X_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
"""
This was detected using per-package host/target directories, but can
be reproduced without it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2524acd417
("package/x11r7/xlib_libxshmfence: bump version to 1.3"), the patch
0001-configure.ac-call-AC_USE_SYSTEM_EXTENSIONS.patch was dropped, but
the corresponding AUTORECONF = YES was not dropped.
This causes a build issue if just xlib_libxshmfence is built (using
"make xlib_libxshmfence" or using per-package host/target directories):
>>> xlib_libxshmfence 1.3 Autoreconfiguring
configure.ac:40: error: must install xorg-macros 1.3 or later before running autoconf/autogen
configure.ac:40: the top level
This commit fixes that by dropping the no longer needed
AUTORECONF = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When <pkg>_NEEDS_EXTERNAL_WAF is set to YES, <pkg>_WAF is set to
$(HOST_DIR)/bin/waf within the inner-waf-package macro. This reference
to $(HOST_DIR) should use $$(HOST_DIR) so that it is properly expanded
at the time of use, and not at the time of the macro expansion.
In the current Buildroot, this doesn't cause any visible problem
because $(HOST_DIR) points to the same directory for all
packages. However, with per-package host/target directories, this is
no longer the case. It causes a build issue because it tries to use
"waf" from the global host directory, which doesn't exist during the
build.
This commit fixes the following build issue with per package
host/target directories:
/home/test/autobuild/run/instance-2/output/per-package/mpv/host/bin/python2: can't open file '/home/test/autobuild/run/instance-2/output/host/bin/waf': [Errno 2] No such file or directory
make: *** [/home/test/autobuild/run/instance-2/output/build/mpv-0.27.2/.stamp_configured] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- README has been renamed into README.md so update NUMACTL_LICENSE_FILES
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use SPDX short identifier (Imlib2) instead of full name
- Add COPYING-PLAIN to license files
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patch to fix build error:
ping.c: In function ‘main’:
ping.c:212:23: error: ‘AI_CANONIDN’ undeclared (first use in this function); did you mean ‘AI_CANONNAME’?
hints.ai_flags &= ~ AI_CANONIDN;
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make use of https for sqlite.org.
Signed-off-by: Ferdinand van Aartsen <ferdinand@ombud.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The old URL was not working for quite some time.
Signed-off-by: Marcel Patzlaff <m.patzlaff@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add RISC-V 64-bit defconfig for QEMU virt machine.
Tested with QEMU 2.12.1
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the RISC-V Proxy Kernel (pk) package which provides the Berkeley
Boot Loader for booting RISC-V kernel images.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- fix prompt of option to be just "riscv-pk"
- add blank line between help text and upstream URL in Config.in file
- use $(INSTALL) instead of cp to install the generated image]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This enables a riscv64 system to be built with a Buildroot generated
toolchain (gcc >= 7.x, binutils >= 2.30, glibc only).
This configuration has been used to successfully build a qemu-bootable
riscv-linux-4.15 kernel (https://github.com/riscv/riscv-linux.git).
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas:
- simplify arch.mk.riscv by directly setting GCC_TARGET_ARCH
- simplify glibc.mk changes by using GLIBC_CONF_ENV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc is not using the autotools-package infrastructure, so we are
calling the ./configure script manually. Currently, the few autoconf
cache variables are passed as arguments to the ./configure script,
while we pass them through the environment in the autotools-package
infrastructure.
So let's pass them in the environment, and use a GLIBC_CONF_ENV
variable to store them. This will allow in a follow-up commit to
conditionally add more autoconf cache variables to the glibc build.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Copyright and COPYING file sha256 are missing.
Add them calculating locally.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
