Begin the conversion from hard-coded dependencies on architectures, to
architecture-specified version requirement, using the newly introduced
BR2_ARCH_NEEDS_GCC_AT_LEAST_XXX symbols.
Hard-coded dependencies will be removed progressively, as archs are
individually converted over to using the new symbols.
We do not change the architecture-specific versions for ARC and
OpenRISC, because there is no point in doing so for those, as they use
special, non-upstream versions anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some CPU variants require that a recent-enough gcc be selected. For
example, ARM's cortex-a35 requires gcc-5, while cortex-a73 requires
gcc-7. Same goes for other architectures, of course.
Currently, we hard-code every such conditions in the gcc version choice,
as well as in the individual external toolchains.
However, as we add even more CPU variants, the conditions are getting
more and more complex to write and maintain.
Introduce new symbols, that architectures can select if they have a
specific requirement on the gcc version. gcc and external toolchains
can then properly depend on those symbols.
The burden of maintaining the requirements on the gcc version now falls
down to the architeture, instead of being split up in gcc and all the
external toolchains.
As the oldest gcc version to handle, we can either choose gcc-4.9, as
the oldest version we support in our internal toolchain, or choose
gcc-4.8, as the oldest external toolchain we support (except for the
custom ones, but they'll be handled specifically in upcoming changes).
We choose to go back up to gcc-4.8.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since kernel drivers for Realtek wireless chips use non-standard
interfaces, upstream hostapd does not support them. One have to apply
an external patch for hostapd to work with these chips. See:
https://github.com/pritambaral/hostapd-rtl871xdrv
A configuration option is added to enable support for Realtek chips,
and it's turned off by default.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of letting auto-detection do its job, be explicit about the
fact that we want the JFFS2 and UBIFS utilities when building the host
variant of mtd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some toolchains (musl) have pthread_setname_np but not pthread_getname_np.
The first patch fixes check on pthread_setname_np and the second one add
a check for pthread_getname_np
Fixes:
http://autobuild.buildroot.net/results/65534775c5977e2424c5f5c63c46f9d0f39d7e1b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The addition of a new defconfig in commit
459e3320dc ("configs/imx6sx-sdb: Add new
defconfig") introduced changes in the DEVELOPERS file and
.gitlab-ci.yml file that were not matching the defconfig name. This
commit fixes those issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Renamed --with-libpcre to --with-libpcre1. Currently --with-libpcre
activates pcre1 support but this can change in the future to pcre2:
df7fd961a9/configure.ac (L258)
Please note that we cannot use --with-/--without because it will lead
to an error reported by configure, for example
--with-libpcre1 --without-libpcre2
will produce
configure: error: Only supply one of --with-libpcre1 or --with-libpcre2!
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added new runtime dependency on python-six.
Dropped dbus-python as build time dependency (it's only runtime
dependency).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to a simple bump, the following extra changes have occured:
- Change the refpolicy site to the official release URL.
- Remove REFPOLICY_SITE_METHOD and REFPOLICY_GIT_SUBMODULES as the contrib
submodule is included in the release tarball.
- Refpolicy is now compatible with python3, as such, remove host-python.
from the dependencies and add a check for python3 or python in it's place.
- Add upstreamed 0001-fix-regex-escape-sequence-error.patch to fix building
against python3.6.
- Add sha256 license hash to hash file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.8.2 added OAuth support so we need python-requests-oauthlib
as runtime dependency from now on. This package also has a runtime
dependency on python-requests so all we need is to update the select
command in Config.in.
Removed patch applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the BR2_TARGET_UBOOT_SPL_NAME option accepts a space-separated
list of binaries, the same option can be reuses for TPL binaries as
well. This commit updates the string and help text to indicate that
the same option can be used for SPL and TPL.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building waylandpp for the target requires a wayland-scanner++ binary
built for the host.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: use 'depends on BR2_PACKAGE_WAYLAND' instead of a select.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Omit 5.9.1 as is has broken Python files.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Branch 1.8.x of libupnp is not compatible with branch 1.6.x so add a
dedicated package and make it depends on !BR2_PACKAGE_LIBUPNP as
suggested by Thomas Petazzoni and Arnout Vandecappelle during review
of "libupnp: add 1.8.3 version" patch.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: fix the dependencies of the Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump kernel to version 4.14 and U-Boot to 2017.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6ulevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As there is now a defconfig inside kernel sources for mxs platforms, use it.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenNTPD looks for a crypto library with tls_config_set_ca_mem, which
is available in LibreSSL but not OpenSSL. If tls_config_set_ca_mem is
found, crypto support is added to the build.
Because this is not currently checked, crypto support might not be
added due to the order of the build. Add a small check to see if
BR2_PACKAGE_LIBRESSL is selected, and if so, add a dependency for it.
Also add a note about this in the Config.in help section.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other changes:
- Remove upstream patch.
- Change locally computed hash to hash from the SHA256 URL.
- Add sha256sum for license file.
Note that we need to keep <pkg>_AUTORECONF = YES even though the patch
touching the Makefile.am has been removed, because our libtool patch
doesn't apply on the bundled ltmain.sh.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Prevent the installation from attempting to move shared libraries from
${usrlib_execdir} to ${libdir} if both paths are the same, which leads
to error messages like this:
mv: '$(TARGET_DIR)/usr/lib/libfoo.so.1' and '$(TARGET_DIR)/lib/libfoo.so.1' are the same file
That error is not fatal but let's avoid possible future problems.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes since v2:
- remove newlines from Config.in
- add LICENSE hash
Changes since v1:
- reword commit to match upstream style
- fold the DEVELOPERS modifications into the same commit
- add Config selections for required python core modules
- bump version to 6.3.0
Tested in a clean chroot, events are generated for exceptions, and
reported to the server configured for the client.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, add hashes for all three license files.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, add a hash for the license file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, add a hash for the license file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, add a hash for the license file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition:
- Update license to GPL-3.0+
- Add a shash for the license file.
See: https://lists.gnu.org/archive/html/info-gnu/2017-11/msg00002.html for
more information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, add a hash for the license file
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, remove upstreamed patches and add a hash for the license
file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Thomas: indicate pgp signature file address in hash file, as
suggested by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version has a new command line argument to sgdisk, -j, that lets one
change the starting address of where the GPT partition table entries are
stored.
The iMX SoC ROM loader, and perhaps others, expects the bootloader to start
at sector 2. Using this option with gptfdisk lets the table entries move
to make space for the bootloader image.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove 0001-configure.ac-use-given-CFLAGS-LIBS-for-mysqlclient-l.patch,
it does not have been sent upstream but issue has been fixed by
3b7164f7f9 (diff-67e997bcfdac55191033d57a16d1408a)
- 0002-Rename-base64_encode.patch has been integrated into this version
- --without-jpeg-turbo has been deleted from configure.ac
- libsdl dependency has been removed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This updates the LEGO MINDSTORMS EV3 board to Linux kernel 4.14 and
U-Boot 2017.11.
* Kernel patches are dropped because they are in mainline now.
* This caused the kernel image to be >3M so some adjustments to the image
sizes/layout needed to be made in U-Boot.
* Updated U-Boot version bumped since we are touching this config anyway
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6sx-sdb_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>