Bump to version 8.2.
Define CONFIG_DIR=/etc/hiawatha, LOG_DIR=/var/log, PID_DIR=/var/run and
WEBROOT_DIR=/var/www/hiawatha which are the same as the defaults but
without the /usr prefix.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When vala is built inside a Git repository with uncommitted changes, the
valac version number has -dirty appended. This creates problems for
packages (e.g. Midori) which require a valac version number without
the -dirty suffix.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing ccache infrastructure sets the cache directory hardcoded in the
ccache binary. As this directory was set to ~/.buildroot-ccache, the cache
is not necessarily local (e.g. in corporate environments the home directories
may be mounted over NFS.)
Previous versions of buildroot did allow to set the cache directory, but this
was also hardcoded (so you had to rebuild ccache to change it), plus that
support was removed.
See http://lists.busybox.net/pipermail/buildroot/2011-July/044511.html for
a discussion on this.
This patch modifies ccache to respect a new shell variable (exported from
the Makefile, based on a configuration option) instead of CCACHE_DIR.
The name CCACHE_DIR itself is already used by autotargets for the ccache
package.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation generation process requires a special yold2man
program, for which we don't have a package in Buildroot. Since we
generally don't care much about documentation of packages, just adjust
the package Makefile.in to not build/install its documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In kernel >= 3.3, the ext2_fs.h can no longer be imported from
userspace. This has been fixed for internal toolchains by adding a
patch to kernel headers, but this doesn't work with toolchains
generated by Crosstool-NG, or potentially upcoming external
toolchains.
socat in fact has a test in its configure.in, but the configure was
generated too long ago, and the generated test relies on the
preprocessor result and not the compiler result (but warns that in the
future, the compiler result will be used instead of the preprocessor
result).
So, by running autoconf on this package, we fix the problem: it
properly checks whether ext2_fs is usable or not, and acts
accordingly. Of course, it means that with recent versions of the
kernel, ext2-specific features of socat are unavailable, and we'll
have to wait for the socat developers to adapt their code so that they
use the e2fsprogs headers.
We also bump the version, since a new minor version fixing a security
problem has been released.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The apr library requires shared library support unconditionally, so
make it depend on !BR2_PREFER_STATIC_LIB, so that architectures that
support static libraries only do not make this package available.
Solves
http://autobuild.buildroot.org/results/f4cd9751e85e9ee7fde2e9479e0f01ab2be93e84/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The opencv package selects zlib, but it does not depend on it. This
leads to cases where opencv gets built before zlib, and in this case,
opencv uses its internal version of zlib, which doesn't build properly
(it has some conditional code for ARM that is probably broken), see:
http://autobuild.buildroot.org/results/45f4e195fe0cc5acace10287f5ff33aa953d5430/build-end.log
We fix this by properly adding the opencv dependency on zlib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libnl support is enabled by default since version 1.0, so disable it
to avoid build breakage when there's no libnl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Decimal floats were introduced circa gcc-4.2 or -4.3, and requires
the floating-point environement fenv.h in the C library.
The uClibc .config file used by crosstool-NG to build uClibc is the
same as used by the internal buildroot mechanism, and explcitly
disables fenv support.
The quick workaround is to simply disable decimal floats in all
crosstool-NG config files.
In the long run, it might be better to check this situation, and/or
add code and/or options in crosstool-NG to handle this (but it is
much more involved, and this workaround is sane).
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having dtc as a host tool can be useful for users that have a custom
boot scenario where the device tree is not embedded in the kernel.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
SUPPORT_LIB_DIR would get resolved to the main buildroot directory for
external toolchains without C++ support, as:
- gcc -print-file-name=<nonexisting-file> returns <nonexisting-file>
- readlink -f <nonexisting-file> returns $PWD/<nonexisting-file>
So fix it by ensuring output of gcc -print-file-name actually exists
before using it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 1.0
Also convert to gentargets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 1.0
Also convert to gentargets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 3.2.9 and add an option to install the tools.
Since they're not usually required we default to N to reduce size.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The heirloom-mailx Makefile runs makeconfig if this has not been done
before. In a parallel build, this means makeconfig may be run several
times in parallel because there are two targets that depend on makeconfig.
See for instance
http://autobuild.buildroot.net/results/d24854be69961f71db189f9d804d4bd2cfa078da
To avoid this, run makeconfig in the configure step, which is not parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 1.0.0j to fix CVE-2012-2333
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
