Since a few releases, the pre-built musl external toolchain has added
an ARM EABIhf variant, built for ARMv5T. This commit allows this
additional external toolchain to be used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Just rename Kconfig symbols
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Rename the Kconfig symbol even if this toolchain is marked as broken.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old ADI toolchain handling in glog, openpgm and zeromq.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old CS toolchain handling in pixman and liquid-dsp.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some package black list CS NIOSII toolchains, mainly due to _gp link
issue. A follow up patch can remove the restriction case by case.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Musl does not provide a 'sys/queue.h' implementation, and this has been
a problem for packages that depend on it.
So lets create a package called netbsd-queue that will install a
'sys/queue.h' in the staging directory when enabled, based on the
NetBSD implementation.
Musl toolchain and external toolchain packages will depend on this
package, so that 'sys/queue.h' will be always installed when compiling
with a musl based toolchain.
Tested on ARM and x86 in the following cases:
- Buildroot musl toolchain.
- External musl toolchain without 'sys/queue.h'.
- External musl toolchain with 'sys/queue.h'.
Fixes:
http://autobuild.buildroot.net/results/24bad2d06ab40024dacf136bee722072d587f84e
And possibly many others.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the latest Linaro toolchain, the gdbserver has moved (surprise!)
and is now located side-by-side with the toolchain executables.
This commit adds this path as a new location where to search for a
gdbserver, and while at it wraps the line that has become too long in
the process.
[Thomas: rework commit log according to Yann's suggestion.]
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 23ffa7ec first extracts to the toolchain-external build
directory and then moves everything to $(HOST_DIR)/opt/ext-toolchain.
However, this is not idempotent, because moving directories over
existing ones doesn't always work, particularly if the target is on
another device.
Simply remove the destination contents before moving.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The backfin toolchains come in two archives.
We extract the first (main) archive using the generic extract commands,
while the second is extracted as a post-extract hook.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that packages can provide a list of files to be excluded when
extracting their archive, downloaded external toolchains are no longer
special in this respect.
Still, those toolchains are currently extracted directly into their
final location, $(HOST_DIR)/opt/ext-toolchain/ which means we still
need a custom extract command.
Except, we don't really need it: we can just move the toolchain, after
it's been extracted by the generic extract command, with a post-extract
hook.
This means that:
- we now extract the toolchain with the generic extract command,
- the toolchain is thus extracted into $(@D) ,
- fixup commands are run against $(@D), as a post-extract hook,
instead of against $(HOST_DIR)/opt/ext-toolchain ,
- once this is done, we move $(@D)/* into the final location with a
new post-extract hook.
Note: the blackfin case is special, and will be handled in a follow-up
patch.
[Thomas: register the TOOLCHAIN_EXTERNAL_FIXUP_CMDS only for the Arago
case, add some additional comments in the code about why we're moving
the toolchain around.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the blackfin external toolchains, we tell tar to
extract files with the --hard-dereference. However, --hard-dereference
is only meaningful when creating an archive, not when extracting
it. Therefore, let's drop this option.
[Thomas: rework commit title and commit log, after some suggestions
from Arnout.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
[Thomas: tweak Config.in help text to actually match this toolchain
instead of being a wrong copy/paste from the old Linaro toolchain for
ARMeb.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
[Thomas: s/eglibc/glibc/ as noticed by Baruch.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildroot internal toolchain now adds a wrapper. When we use a
buildroot toolchain as an external toolchain, we want to bypass this
wrapper and call the compiler directly, for two reasons:
1. The options added by the wrapper are not necessarily appropriate
when it is reused as an external toolchain. For instance, ccache
may have been enabled while building the toolchain but not when
using it as an external toolchain.
2. Currently, the wrapper expects to reside in .../usr/bin, but when
used as an external toolchain it will be in .../ext-toolchain/bin.
Therefore, the wrapper can't find the real binary and sysroot
anymore.
To bypass the wrapper, we check for the existence of *.br_real files in
the external toolchain directory. If any such file exists, the wrapper
will add the .br_real suffix for all the wrapped files. Note that the
wrapper doesn't check if the *.br_real exists for each individual
wrapped file, it just assumes that all wrapped files have a
corresponding .br_real. This is currently true but that may change in
the future of course.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The toolchain wrapper will be reused for the internal toolchain, so it
belongs in the toolchain directory. Also, the ext- prefix is removed
from it. The build commands are moved to a new toolchain-wrapper.mk.
The wrapper arguments that are also relevant for the internal toolchain
wrapper are moved to toolchain-wrapper.mk, the rest stays in
toolchain-external.mk.
While we're at it, move the building of the toolchain wrapper to the
build step of toolchain-external. There is no specific reason to do
this, other than that it fits better semantically. Also remove the
MESSAGE call, otherwise we'd see:
>>> toolchain-external undefined Building
>>> toolchain-external undefined Building toolchain wrapper
/usr/bin/gcc ...
Having an extra "Building toolchain wrapper' message is pointless.
The useless condition on $(BR2_TARGET_OPTIMIZATION) is removed. It was
always true because it wasn't qstrip'ped first, so clearly it works
without that condition as well.
Also rewrapped some comments and removed the 'external' reference.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some external toolchain vendors the actual source code URL can be simply
derived from the binary file URL.
Here we obtain TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL for all Mentor and
Linaro toolchains with a few $(subst) calls.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Trailing slashes are going to be declared illegal from FOO_SITE
variables.
But Buildroot internally generates such a variable when using a custom
external toolchain (i.e. BR2_TOOLCHAIN_EXTERNAL_CUSTOM). This is
because TOOLCHAIN_EXTERNAL_SITE is set to
$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))), and $(dir)
leaves a trailing slash.
Fix it using patsubst, just like linux and the bootloaders do.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When ARCH is arm and the hard-floating-point option is on executables
expect to find the dynamic linker at /lib/ld-musl-armhf.so.1 and not
/lib/ld-musl-arm.so.1.
This patch adjusts the logic that creates the symbolic link from the
dynamic linker path to the musl C library (since musl has everything
built into a single file).
[Thomas: tweak the commit log.]
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Before this commit, the output of the toolchain-external build steps
looked like this (abbreviated for clarity):
>>> toolchain-external undefined Building
>>> toolchain-external undefined Installing to staging directory
>>> toolchain-external undefined Copying external toolchain sysroot to staging...
>>> toolchain-external undefined Building ext-toolchain wrapper
mkdir -p output/host/usr/bin; cd output/host/usr/bin; for i in ...
/usr/bin/gcc -O2 -Ioutput/host/usr/include -DBR_SYSROOT='...
if test -f output/host/usr/bin/i686-pc-linux-gnu-gdb ; then mkdir -p ...
>>> toolchain-external undefined Fixing libtool files
>>> toolchain-external undefined Installing to target
>>> toolchain-external undefined Copying external toolchain libraries to target...
if test -e output/target/lib/ld-uClibc.so.1; then ln -sf ld-uClibc.so.1 output/target/lib/ld-uClibc.so.0 ; fi
if test -e output/target/lib/ld64-uClibc.so.1; then ln -sf ld64-uClibc.so.1 output/target/lib/ld64-uClibc.so.0 ; fi
All the long lines with conditions and loops in them are not usefull,
so put $(Q) in front of them. The line with mkdir can better be split
on a separate line so the cd stands out more. There are two redundant
semicolons that can be removed. The installation of gdbinit could
use an extra message so the user can see what is going on.
After this commit, the toolchain-external build steps look like this:
>>> toolchain-external undefined Building
>>> toolchain-external undefined Installing to staging directory
>>> toolchain-external undefined Copying external toolchain sysroot to staging...
>>> toolchain-external undefined Building ext-toolchain wrapper
/usr/bin/gcc -O2 -Ioutput/host/usr/include -DBR_SYSROOT='...
>>> toolchain-external undefined Installing gdbinit
>>> toolchain-external undefined Fixing libtool files
>>> toolchain-external undefined Installing to target
>>> toolchain-external undefined Copying external toolchain libraries to target...
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c68c365d29 ("toolchain-external:
remove CS sh2 toolchains") removed the definitions of the
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 and
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009, but did not actually
remove the code that was using those options.
So this commit removes the parts of the code that are currently dead
due to this: the definition of the prefix of those toolchains, the
hashes, and the URLs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit wires up the gcc version dependency mechanism in the
external toolchain backend. To do so, it:
* Changes the definition of all pre-defined external toolchain
profiles to select the appropriate BR2_TOOLCHAIN_GCC_AT_LEAST_*
option.
* For custom external toolchains, provides a visible Config.in
"choice" to select the gcc version used in the external toolchain.
* Adds a new check_gcc_version function, that verifies that the real
gcc version found in the external toolchain matches the one
declared in the Buildroot configuration.
[Thomas: use better sed expression proposed by Yann E. Morin, which
works with more cases.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 34f95bf9db (toolchain-external: fix support of uClibc-ng toolchains,
2015-07-13) added the missing ld-uClibc.so.1 dynamic linker symlink that
binaries expect when linked with uClibc-ng. However on 64bit targets the
linker is called ld64-uClibc.so.1. Handle that case as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uClibc-ng dynamic loader is called ld-uClibc.so.1, but gcc is not
patched specifically for uClibc-ng, so it continues to generate
binaries that expect the dynamic loader to be named ld-uClibc.so.0,
like with the original uClibc.
Therefore, when a uClibc-ng toolchain is used as an external
toolchain, we need to create an additional symbolic link to make
uClibc-ng systems work properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain from the Cavium Networks Octeon SDK provides a sysroot
with library directories lib32, lib32-fp, lib64 and lib64-fp. The -fp
variants are used for processors with hardware floating point unit, such
as the Octeon III variants.
When specifying -march=octeon3 in BR2_TARGET_OPTIMIZATION, the toolchain
will use lib32-fp, but currently Buildroot does not accept that pattern.
This patch improves the matching by accepting lib(32|64)?([^/]*)? as lib
directory name.
Signed-off-by: Bai Yingjie <byj.tea@gmail.com>
[ThomasDS: update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas: add comment above the function being modified to illustrate
the various cases we try to handle.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 1.1.6, the mips softfloat toolchains are merged into the mips
toolchain using multilib. Our external toolchain infrastructure copies
the correct version to the target depending on the BR2_SOFT_FLOAT
option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For Linaro toolchains, a special post install staging hook is used to
create two symlinks needed for the dynamic loader to find the
libraries. However, the way the link is created prevents a 'make
toolchain-external-reinstall' from succeeding, because the symlink
already exists and points to a directory:
ln -sf . /home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf
ln: '/home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf/.': cannot overwrite directory
This commit adjust the hook to pass the '-n' option so that the link
name is treated as a normal file if it is a symbolic link to a
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We will *always* be missing a hash file for custom external toolchains
that are downloaded.
So, just ignore that failure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 1.1.6 version of musl-cross fixes the two issues that had been
preventing versions after 1.1.1 being used by buildroot, namely:
- sysroot is enabled again
- kernel headers are included again
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this change we add pre-built external toolachins for DesignWare ARC
cores. All currently existed flavours are supported:
* ARC 700 and ARC HS cores
* Little- and big-endian configurations
These pre-built tools are built with build scripts available here
(https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/tree/arc-2014.12)
and correspond to arc-2014.12 release of sources.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
The computation of TOOLCHAIN_EXTERNAL_BIN has a special case for
Blackfin, where it's set to
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
instead of $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin for other
architectures.
However, this is actually only true for Analog Devices pre-built
toolchains. Other Blackfin external toolchains (such as ones built by
Buildroot) do not have this special organization.
Therefore, in order to make those non-ADI Blackfin toolchains work, we
need to change the condition from BR2_bfin to testing specifically for
the ADI toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new option BR2_GCC_ENABLE_LTO that builds gcc and binutils with
LTO support.
Individual packages still have to enable LTO explicitly by passing '-flto' to
GCC, which passes it on to the linker. This option does not add that flag
globally. Some packages detect if the compiler supports LTO and enable the flag
if it does.
To support LTO, ar and ranlib must be called with an argument which triggers the
usage of the LTO plugin. Since GCC doesn't call these tools itself, it instead
provides wrappers for ar and ranlib that pass the LTO arguments. This way
existing Makefiles don't need to be changed for LTO support. However, these
wrappers are called <tuple>-gcc-ar which matches the pattern to link to the
buildroot wrapper in the external toolchain logic. So the external toolchain
logic is updated to provide the correct symlink.
[Thomas:
- Add a separate BR2_BINUTILS_ENABLE_LTO option to enable LTO
support in binutils. This is a blind option, selected by
BR2_GCC_ENABLE_LTO. It just avoids having binutils.mk poke
directly into gcc Config.in options.
- Remove the check on the AVR32 special gcc version, which we don't
support anymore.
- Adapt the help text of the LTO Config.in option to no longer
mention "Since version 4.5", since we only support gcc >= 4.5 in
Buildroot anyway.
- Fix typo in toolchain-external.mk comment.]
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain is AMD64-only so restrict it accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These have been deprecated since 2014.02
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
External toolchain can also have been generated by Buildroot previously, as
the list that follows demonstrates. Rephrase the paragraph describing what an
external toolchain is as suggested by Thomas Petazzoni, to make it clearer.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Slightly reword a comment to no longer mention avr32.
This part dealing with sysroot detection will have to be reworked, now
that we got rid of avr32: we can now require a fully sysroot-aware
toolchain, i.e. at least gcc-4.4.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all the installation work of the toolchain-external package
is done during the install-staging step. However, in order to be able
to properly collect the size added by each package to the target
filesystem, we need to make sure that toolchain-external installs its
files to $(TARGET_DIR) during the install-target step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jérôme Pouiller <jezz@sysmic.org>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Some crazy folks use MIPS machines as build machines. ;-)
On MIPS, the only acceptable hash-style is 'sysv', because the MIPS ABI
defines that the GOT ordering to be the same as the symbols ordering,
while GNU hash requires symbols to be sorted by their hash.
Looking at binutils' code, it seems that only MIPS suffers from that
limitation.
Currently, we force the toolchain wrapper to be linked with both hash
styles, which breaks on MIPS.
So, fix that by singling out MIPS, and use sysv in that case, and both
otherwise.
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the ARM, ARMeb and AArch64 Linaro toolchains from 14.08 to
14.09. We can't bump to 14.10, because they completely changed the
toolchains and they are now completely broken: they switched from
Crosstool-NG to a new build tool to generate the toolchain, and now
the sysroot handling is completely borked.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the BR2_GCC_TARGET_TUNE value is always empty now, there is no
longer a point in using it in the external toolchain logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new toolchain release fixes a number of issues found with the previous
one. In particular, the issues with fallocate64, prlimit64 and the
ill-installed linux headers seem to be fixed now.
Therefore, there's not need to sanitize the headers for this toolchain and some
packages should now build fine (e.g. fio).
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 2014R1 toolchain is provided in two flavours by Analog Devices:
one based on gcc 4.3.x, which is considered stable, and one based on
gcc 4.5.x, considered experimental. In commit
5a65b8e185 ("toolchain-external: add ADI
Blackfin 2014R1 toolchain, remove 2012R1") both variants were added.
However, after some testing in the autobuilders, and discussion with
the Analog Devices folks, it turns out that the experimental version
of the toolchain is too experimental. It causes numerous build
failures, and the Analog Devices folks clearly say that it's an early
release and that they expect quite a few problems to show up.
Therefore, this commit removes the experimental flavor and keeps only
the stable variant. Note that the removal/renaming of the Config.in
options is not a problem, since those options were added after the
2014.05 release.
Fixes:
http://autobuild.buildroot.org/results/2a9/2a9d9c332a206fdb46bc8ba022c74d23082a6312/http://autobuild.buildroot.org/results/e1c/e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/http://autobuild.buildroot.org/results/993/993aca3f4719afaa4b37524f9136fb8cdc53a066/
and more.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
However, this toolchain is only usable for e500v2 with the SPE ABI.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
And while we're at it, factorize the definition of the musl version,
since it's common to the definition of the tarball names for the
various supported architectures.
[Peter: Adjust Config.in info to match new version]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for two ADI Blackfin toolchains: the 'stable'
2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc
4.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For some reason, there is no ARMeb toolchain available in the 2014.05
Linaro release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The major changes are: switch to gcc 4.9 instead of 4.8, and switch to
glibc 2.19 instead of glibc 2.18.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When getting the sysroot used for the kernel headers version check,
passing TOOLCHAIN_EXTERNAL_CFLAGS causes a problem when used with
multilib toolchains, where only the main sysroot has the header files,
and the other sysroots only have the libraries.
Since the kernel headers version used is normally the same for all
sysroots, this commit solves this problem by removing the
TOOLCHAIN_EXTERNAL_CFLAGS argument when calling
toolchain_find_sysroot, so that it returns the main sysroot, in which
<linux/version.h> can be found for the kernel headers version check.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since the introduction of the kernel headers Config.in options, the
external toolchain logic had a check for custom external toolchains to
verify that the kernel headers version entered by the user matches the
one of the toolchain. However, this check was not made for non-custom
external toolchains (i.e the built-in profiles, such as Linaro,
CodeSourcery and al.), making the assumption that the Buildroot
developers will do the right selection.
However, it is quite nice when bumping external toolchains to have
this automatic kernel headers version check, to ensure we select the
appropriate kernel headers version.
Therefore, this commit makes the kernel headers version check
applicable to non-custom external toolchains.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
As reported by William Welch <bvwelch@gmail.com>, the Musl external
toolchain provided by the musl-cross project is only Microblaze
big-endian. In fact, Musl seems to only support the big endian variant
of the Microblaze architecture, with the microblaze-* tuple.
This commit makes sure the Musl pre-built external toolchain provided
by musl-cross can only be selected for a big-endian Microblaze
configuration.
Reported-by: William Welch <bvwelch@gmail.com>
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit cd32da8f79
("toolchain-external: add Linaro ARM big endian toolchain") a mistake
was made, probably due to a rebase conflict that was incorrectly solved:
the call to the post install staging hook that creates the necessary
symbolic links for a root filesystem based on Linaro 2014.02 to work
was removed.
This commit reinstates this call, which should fix the problem
observed by Maxime Hadjinlian while using Linaro 2014.02.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds ten toolchains based on the musl C library that are
publicly available from the musl-cross project.
[Peter: fix ppc prefix, only for classic ABI]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit slightly improves the external toolchain backend, and the
gdb build logic to create a file named
$(STAGING_DIR)/usr/share/buildroot/gdbinit which can be used as a
gdbinit file using gdb -x option. This allows gdb to automatically use
the proper sysroot to find libraries.
The initial insight for this patch comes from the report of Oded
Hanson <OHanson@xsightsys.com>, who found an issue with the Eclipse
Buildroot plugin, which was setting a solib-path in gdb, but not a
sysroot. Setting a solib-path was enough to find shared libraries, but
not the dynamic linker. And since Eclipse doesn't allow to set the
sysroot in any other way than giving a gdbinit file, it makes sense to
have Buildroot generate a gdbinit file (which can be used in other
situations than Eclipse).
To achieve this, this commit introduces a gen_gdbinit_file helper in
toolchain/helpers.mk, and uses it for the internal toolchain and
external toolchain backends.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[ThomasDS: minor updates in commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linaro has started to release ARM big endian toolchains, so we
integrate this toolchain in the external toolchain logic of
Buildroot. Since ARM big endian is probably going to be a lot more
uncommon than ARM little endian, we will only support one version at a
time of this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Nios-II Sourcery external toolchain (the only Nios-II we currently
support) exports broken kernel headers. In particular, these kernels should
be exported using the "headers_install" rule which applies a set of fixes
on the kernel headers so they are suitable for userspace usage.
In order to fix this, add a post-install hook to perform the header fixes
ourselves. The result is equivalent to apply the "headers_install" rule.
Fixes:
http://autobuild.buildroot.net/results/c32/c32ad4bac5f651502e551f7733f702afaa0e742a/
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Old toolchains, with old gcc that do not support -print-sysroot, break the
kernel-headers version check script: it fails to find the sysroot of the
toolchain, and thus ends up including the host's linux/version.h.
Most of the time, this will break early, since the host's kernel headers
will not match the toolchain settings.
But it can happen that the check is succesful, although the configuration
of the toolchain is wrong:
- the custom toolchain has kernel headers vX.Y
- the user selected vX.Z (Z!=Y)
- the host has headers vX.Y
In this case, the check passes OK, but the build of some packages later on
will break (which is exactly what those _AT_LEAST_XXX options were added to
avoid).
Fix that by passing the sysroot to the check script, instead of the cross
compiler.
We get the sysroot as thus:
- for custom toolchains, we use the macro toolchain_find_sysroot. We can
do that, because we already have a complete sysroot with libc.a at that
time.
- for internal toolchain using a custom kernel headers version, we just
use $(STAGING_DIR). We can't use the macro as for custom toolchains
above, because at the time we install the kernel headers, we do not yet
have a complete sysroot with a libc.a. But we can just use
$(STAGING_DIR), since we're only interested in the kernel headers.
For all other types of toolchains, we already have the _AT_LEAST_XXX options
properly set, so we need not add a check in this case.
Fixes:
http://autobuild.buildroot.net/results/f33/f331a6eff0b0b93c73af52db3a6b43e4e598577e/http://autobuild.buildroot.net/results/a57/a5797c025bec50c10efdcff74945aab4021d05e4/
[...]
[Thanks to Thomas for pointing out the toolchain_find_sysroot macro!]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like ARM ones, the Linaro AArch64 toolchains expect libraries in
/lib/aarch64-linux-gnu and /usr/lib/aarch64-linux-gnu, but Buildroot
always installs them in /lib and /usr/lib. Therefore, this commit adds
the appropriate symbolic links, just like we're already doing for
Linaro ARM toolchains.
Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On x86, the symbolic link ld-musl-<ARCH>.so.1 to libc.so must be
ld-musl-i386.so.1 in all cases, but $(ARCH) in Buildroot might be
i386, i486, i586, i686, etc. depending on the specific x86 variants
being selected.
This commit fixes that by creating a MUSL_ARCH variable set to i386 on
x86, and to $(ARCH) on other architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Ensure the kernel headers version used in the custom external toolchain,
or the manually-specified kernel headers version, matches exactly the one
selected by the user.
We do not care about the patch-level, since headers are not supposed to
change between patchlevels. This applies only to kernels >= 3.0, but
those are actually the ones we do care about; we treat all 2.6.x kernels
as being a single version, since we do not support any 2.6 kernels for
packages with kernel-dependant features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently ld-linux-armhf.so.* is added to external libs when
using an EABIhf toolchain, but this naming is not used by uClibc.
Fix by adding a check for glibc.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Linaro ARM 2013.10 and Linaro ARM 2013.11, and remove Linaro ARM
2013.07 and Linaro ARM 2013.08.
The main change for those versions is the switch to eglibc 2.18.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for the recently release Sourcery MIPS
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery MIPS 2012.03 toolchain.
While we're at it, also fix the incorrect help text related to the
MIPS64 multilib selection.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds the support for the recently release Sourcery ARM
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery ARM 2011.09 toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Based on a suggestion from Peter, this commit factorizes the logic and
regular expressions that are used to find the sysroot and libdir for a
given compiler. It reduces a bit the duplication of code, and
centralizes the most bizarre part of this logic in one place.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop extra # as pointed out by Baruch Siach]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
