b731dc7bfb
Commit 23ffa7ec first extracts to the toolchain-external build
directory and then moves everything to $(HOST_DIR)/opt/ext-toolchain.
However, this is not idempotent, because moving directories over
existing ones doesn't always work, particularly if the target is on
another device.
Simply remove the destination contents before moving.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
812 lines
39 KiB
Makefile
812 lines
39 KiB
Makefile
################################################################################
|
|
#
|
|
# toolchain-external
|
|
#
|
|
################################################################################
|
|
|
|
#
|
|
# This package implements the support for external toolchains, i.e
|
|
# toolchains that are available pre-built, ready to use. Such toolchain
|
|
# may either be readily available on the Web (Linaro, Sourcery
|
|
# CodeBench, from processor vendors) or may be built with tools like
|
|
# Crosstool-NG or Buildroot itself. So far, we have tested this
|
|
# with:
|
|
#
|
|
# * Toolchains generated by Crosstool-NG
|
|
# * Toolchains generated by Buildroot
|
|
# * Toolchains provided by Linaro for the ARM and AArch64
|
|
# architectures
|
|
# * Sourcery CodeBench toolchains (from Mentor Graphics) for the ARM,
|
|
# MIPS, PowerPC, x86, x86_64 and NIOS 2 architectures. For the MIPS
|
|
# toolchain, the -muclibc variant isn't supported yet, only the
|
|
# default glibc-based variant is.
|
|
# * Analog Devices toolchains for the Blackfin architecture
|
|
# * Xilinx toolchains for the Microblaze architecture
|
|
# * Synopsys DesignWare toolchains for ARC cores
|
|
#
|
|
# The basic principle is the following
|
|
#
|
|
# 1. If the toolchain is not pre-installed, download and extract it
|
|
# in $(TOOLCHAIN_EXTERNAL_INSTALL_DIR). Otherwise,
|
|
# $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) points to were the toolchain has
|
|
# already been installed by the user.
|
|
#
|
|
# 2. For all external toolchains, perform some checks on the
|
|
# conformity between the toolchain configuration described in the
|
|
# Buildroot menuconfig system, and the real configuration of the
|
|
# external toolchain. This is for example important to make sure that
|
|
# the Buildroot configuration system knows whether the toolchain
|
|
# supports RPC, IPv6, locales, large files, etc. Unfortunately, these
|
|
# things cannot be detected automatically, since the value of these
|
|
# options (such as BR2_TOOLCHAIN_HAS_NATIVE_RPC) are needed at
|
|
# configuration time because these options are used as dependencies
|
|
# for other options. And at configuration time, we are not able to
|
|
# retrieve the external toolchain configuration.
|
|
#
|
|
# 3. Copy the libraries needed at runtime to the target directory,
|
|
# $(TARGET_DIR). Obviously, things such as the C library, the dynamic
|
|
# loader and a few other utility libraries are needed if dynamic
|
|
# applications are to be executed on the target system.
|
|
#
|
|
# 4. Copy the libraries and headers to the staging directory. This
|
|
# will allow all further calls to gcc to be made using --sysroot
|
|
# $(STAGING_DIR), which greatly simplifies the compilation of the
|
|
# packages when using external toolchains. So in the end, only the
|
|
# cross-compiler binaries remains external, all libraries and headers
|
|
# are imported into the Buildroot tree.
|
|
#
|
|
# 5. Build a toolchain wrapper which executes the external toolchain
|
|
# with a number of arguments (sysroot/march/mtune/..) hardcoded,
|
|
# so we're sure the correct configuration is always used and the
|
|
# toolchain behaves similar to an internal toolchain.
|
|
# This toolchain wrapper and symlinks are installed into
|
|
# $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest
|
|
# of Buildroot is handled identical for the 2 toolchain types.
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC),y)
|
|
LIB_EXTERNAL_LIBS += libatomic.so.* libc.so.* libcrypt.so.* libdl.so.* libgcc_s.so.* libm.so.* libnsl.so.* libresolv.so.* librt.so.* libutil.so.*
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_ARM_EABIHF),yy)
|
|
LIB_EXTERNAL_LIBS += ld-linux-armhf.so.*
|
|
else
|
|
LIB_EXTERNAL_LIBS += ld*.so.*
|
|
endif
|
|
ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
|
|
LIB_EXTERNAL_LIBS += libpthread.so.*
|
|
ifneq ($(BR2_PACKAGE_GDB)$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),)
|
|
LIB_EXTERNAL_LIBS += libthread_db.so.*
|
|
endif # gdbserver
|
|
endif # ! no threads
|
|
endif
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y)
|
|
LIB_EXTERNAL_LIBS += libnss_files.so.* libnss_dns.so.*
|
|
endif
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
|
|
LIB_EXTERNAL_LIBS += libc.so libgcc_s.so.*
|
|
endif
|
|
|
|
ifeq ($(BR2_INSTALL_LIBSTDCPP),y)
|
|
USR_LIB_EXTERNAL_LIBS += libstdc++.so.*
|
|
endif
|
|
|
|
LIB_EXTERNAL_LIBS += $(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS))
|
|
|
|
# Details about sysroot directory selection.
|
|
#
|
|
# To find the sysroot directory, we use the trick of looking for the
|
|
# 'libc.a' file with the -print-file-name gcc option, and then
|
|
# mangling the path to find the base directory of the sysroot.
|
|
#
|
|
# Note that we do not use the -print-sysroot option, because it is
|
|
# only available since gcc 4.4.x, and we only recently dropped support
|
|
# for 4.2.x and 4.3.x.
|
|
#
|
|
# When doing this, we don't pass any option to gcc that could select a
|
|
# multilib variant (such as -march) as we want the "main" sysroot,
|
|
# which contains all variants of the C library in the case of multilib
|
|
# toolchains. We use the TARGET_CC_NO_SYSROOT variable, which is the
|
|
# path of the cross-compiler, without the --sysroot=$(STAGING_DIR),
|
|
# since what we want to find is the location of the original toolchain
|
|
# sysroot. This "main" sysroot directory is stored in SYSROOT_DIR.
|
|
#
|
|
# Then, multilib toolchains are a little bit more complicated, since
|
|
# they in fact have multiple sysroots, one for each variant supported
|
|
# by the toolchain. So we need to find the particular sysroot we're
|
|
# interested in.
|
|
#
|
|
# To do so, we ask the compiler where its sysroot is by passing all
|
|
# flags (including -march and al.), except the --sysroot flag since we
|
|
# want to the compiler to tell us where its original sysroot
|
|
# is. ARCH_SUBDIR will contain the subdirectory, in the main
|
|
# SYSROOT_DIR, that corresponds to the selected architecture
|
|
# variant. ARCH_SYSROOT_DIR will contain the full path to this
|
|
# location.
|
|
#
|
|
# One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The
|
|
# fact is that in multilib toolchains, the header files are often only
|
|
# present in the main sysroot, and only the libraries are available in
|
|
# each variant-specific sysroot directory.
|
|
|
|
|
|
TOOLCHAIN_EXTERNAL_PREFIX = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX))
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
|
|
TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(HOST_DIR)/opt/ext-toolchain
|
|
else
|
|
TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH))
|
|
endif
|
|
|
|
ifeq ($(TOOLCHAIN_EXTERNAL_INSTALL_DIR),)
|
|
ifneq ($(TOOLCHAIN_EXTERNAL_PREFIX),)
|
|
# if no path set, figure it out from path
|
|
TOOLCHAIN_EXTERNAL_BIN := $(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc))
|
|
endif
|
|
else
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
|
|
TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
|
|
else
|
|
TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin
|
|
endif
|
|
endif
|
|
|
|
# If this is a buildroot toolchain, it already has a wrapper which we want to
|
|
# bypass. Since this is only evaluated after it has been extracted, we can use
|
|
# $(wildcard ...) here.
|
|
TOOLCHAIN_EXTERNAL_SUFFIX = \
|
|
$(if $(wildcard $(TOOLCHAIN_EXTERNAL_BIN)/*.br_real),.br_real)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
|
|
-DBR_CROSS_PATH_SUFFIX='"$(TOOLCHAIN_EXTERNAL_SUFFIX)"'
|
|
|
|
TOOLCHAIN_EXTERNAL_CROSS = $(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)-
|
|
TOOLCHAIN_EXTERNAL_CC = $(TOOLCHAIN_EXTERNAL_CROSS)gcc$(TOOLCHAIN_EXTERNAL_SUFFIX)
|
|
TOOLCHAIN_EXTERNAL_CXX = $(TOOLCHAIN_EXTERNAL_CROSS)g++$(TOOLCHAIN_EXTERNAL_SUFFIX)
|
|
TOOLCHAIN_EXTERNAL_READELF = $(TOOLCHAIN_EXTERNAL_CROSS)readelf$(TOOLCHAIN_EXTERNAL_SUFFIX)
|
|
|
|
ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),)
|
|
# TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
|
|
-DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"'
|
|
else
|
|
# TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += \
|
|
-DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"'
|
|
endif
|
|
|
|
ifeq ($(call qstrip,$(BR2_GCC_TARGET_CPU_REVISION)),)
|
|
CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU))
|
|
else
|
|
CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)-$(BR2_GCC_TARGET_CPU_REVISION))
|
|
endif
|
|
CC_TARGET_ARCH_ := $(call qstrip,$(BR2_GCC_TARGET_ARCH))
|
|
CC_TARGET_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_ABI))
|
|
CC_TARGET_FPU_ := $(call qstrip,$(BR2_GCC_TARGET_FPU))
|
|
CC_TARGET_FLOAT_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
|
|
CC_TARGET_MODE_ := $(call qstrip,$(BR2_GCC_TARGET_MODE))
|
|
|
|
# march/mtune/floating point mode needs to be passed to the external toolchain
|
|
# to select the right multilib variant
|
|
ifeq ($(BR2_x86_64),y)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -m64
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_64
|
|
endif
|
|
ifneq ($(CC_TARGET_ARCH_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_CPU_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_ABI_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_FPU_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=$(CC_TARGET_FPU_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_FLOAT_ABI_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -mfloat-abi=$(CC_TARGET_FLOAT_ABI_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"'
|
|
endif
|
|
ifneq ($(CC_TARGET_MODE_),)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -m$(CC_TARGET_MODE_)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"'
|
|
endif
|
|
ifeq ($(BR2_BINFMT_FLAT),y)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -Wl,-elf2flt
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_BINFMT_FLAT
|
|
endif
|
|
ifeq ($(BR2_mipsel)$(BR2_mips64el),y)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -EL
|
|
endif
|
|
ifeq ($(BR2_mips)$(BR2_mips64),y)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -EB
|
|
endif
|
|
ifeq ($(BR2_arceb),y)
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_ARC_TARGET_BIG_ENDIAN
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -EB
|
|
endif
|
|
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION))
|
|
|
|
ifeq ($(BR2_SOFT_FLOAT),y)
|
|
TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float
|
|
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS += -DBR_SOFTFLOAT=1
|
|
endif
|
|
|
|
# The Linaro ARMhf toolchain expects the libraries in
|
|
# {/usr,}/lib/arm-linux-gnueabihf, but Buildroot copies them to
|
|
# {/usr,}/lib, so we need to create a symbolic link.
|
|
define TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
|
|
ln -snf . $(TARGET_DIR)/lib/arm-linux-gnueabihf
|
|
ln -snf . $(TARGET_DIR)/usr/lib/arm-linux-gnueabihf
|
|
endef
|
|
|
|
define TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
|
|
ln -snf . $(TARGET_DIR)/lib/armeb-linux-gnueabihf
|
|
ln -snf . $(TARGET_DIR)/usr/lib/armeb-linux-gnueabihf
|
|
endef
|
|
|
|
define TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
|
|
ln -snf . $(TARGET_DIR)/lib/aarch64-linux-gnu
|
|
ln -snf . $(TARGET_DIR)/usr/lib/aarch64-linux-gnu
|
|
endef
|
|
|
|
# The CodeSourcery MIPS 2015.05 toolchain has some missing headers we
|
|
# need to create manually in order to avoid compilation errors. A bug
|
|
# has been already reported and fixed upstream, and the fix will be
|
|
# included in the next release.
|
|
define TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201505_LIB_NAMES_FIX
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard.h \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h
|
|
$(SED) 's#hard#soft#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard.h \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
$(SED) 's#hard#hard_2008#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
$(SED) 's#ld.so.1#ld-linux-mipsn8.so.1#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
$(SED) '/LD_SO/i \
|
|
#define LD_LINUX_MIPSN8_SO "ld-linux-mipsn8.so.1"' \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h \
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-n64_soft.h
|
|
$(SED) 's#o32#n64#' $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-n64_soft.h
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_soft.h \
|
|
$(STAGING_DIR)/usr/include/gnu/
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-o32_hard_2008.h \
|
|
$(STAGING_DIR)/usr/include/gnu/
|
|
|
|
cp $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/mips-linux-gnu/libc/usr/include/gnu/lib-names-n64_soft.h \
|
|
$(STAGING_DIR)/usr/include/gnu/
|
|
endef
|
|
|
|
# Special handling for Blackfin toolchain, because of the split in two
|
|
# tarballs, and the organization of tarball contents. The tarballs
|
|
# contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
|
|
# which themselves contain the toolchain. This is why we strip more
|
|
# components than usual.
|
|
define TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT
|
|
$(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS) | \
|
|
$(TAR) --strip-components=3 --hard-dereference -C $(@D) $(TAR_OPTIONS) -
|
|
endef
|
|
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.05-24-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.11-33-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv7a-linux-gnueabi-sdk.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2
|
|
define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
|
|
mv $(@D)/arago-2011.09/armv7a/* $(@D)/
|
|
rm -rf $(@D)/arago-2011.09/
|
|
endef
|
|
TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_FIXUP_CMDS
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv5te-linux-gnueabi-sdk.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL = arago-toolchain-2011.09-sources.tar.bz2
|
|
define TOOLCHAIN_EXTERNAL_FIXUP_CMDS
|
|
mv $(@D)/arago-2011.09/armv5te/* $(@D)/
|
|
rm -rf $(@D)/arago-2011.09/
|
|
endef
|
|
TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_FIXUP_CMDS
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y)
|
|
ifeq ($(HOSTARCH),x86)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz
|
|
else
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/components/toolchain/binaries/5.1-2015.08/arm-linux-gnueabihf
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.1-2015.08-x86_64_arm-linux-gnueabihf.tar.xz
|
|
endif
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y)
|
|
ifeq ($(HOSTARCH),x86)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz
|
|
else
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/components/toolchain/binaries/5.1-2015.08/armeb-linux-gnueabihf
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.1-2015.08-x86_64_armeb-linux-gnueabihf.tar.xz
|
|
endif
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201411),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.11-22-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201505),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mips-2015.05-18-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201505_LIB_NAMES_FIX
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2014.05-47-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.03-35-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2011.09-24-i686-pc-linux-gnu-i386-linux.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64_201405),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/x86_64-amd-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = amd-2014.05-25-x86_64-amd-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386
|
|
TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 3
|
|
TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386
|
|
TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2
|
|
TOOLCHAIN_EXTERNAL_STRIP_COMPONENTS = 3
|
|
TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += TOOLCHAIN_EXTERNAL_BLACKFIN_UCLIBC_EXTRA_EXTRACT
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y)
|
|
ifeq ($(HOSTARCH),x86)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz
|
|
else
|
|
TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/components/toolchain/binaries/5.1-2015.08/aarch64-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-5.1-2015.08-x86_64_aarch64-linux-gnu.tar.xz
|
|
endif
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/aarch64-linux-gnu
|
|
TOOLCHAIN_EXTERNAL_SOURCE = aarch64-2014.05-30-aarch64-linux-gnu-i686-pc-linux-gnu.tar.bz2
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y)
|
|
TOOLCHAIN_EXTERNAL_VERSION = 1.1.6
|
|
TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)
|
|
ifeq ($(BR2_arm),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_armeb),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_i386),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_microblazebe),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_mips),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_mipsel),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_powerpc),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
else ifeq ($(BR2_x86_64),y)
|
|
TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz
|
|
endif
|
|
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC_2014_12),y)
|
|
TOOLCHAIN_EXTERNAL_SITE = https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2014.12
|
|
ifeq ($(BR2_arc750d)$(BR2_arc770d),y)
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = arc700
|
|
else
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = archs
|
|
endif
|
|
ifeq ($(BR2_arcle),y)
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = le
|
|
else
|
|
TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = be
|
|
endif
|
|
TOOLCHAIN_EXTERNAL_SOURCE = arc_gnu_2014.12_prebuilt_uclibc_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS)_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE)_linux_install.tar.gz
|
|
else
|
|
# Custom toolchain
|
|
TOOLCHAIN_EXTERNAL_SITE = $(patsubst %/,%,$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))))
|
|
TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
|
|
# We can't check hashes for custom downloaded toolchains
|
|
BR_NO_CHECK_HASH_FOR += $(TOOLCHAIN_EXTERNAL_SOURCE)
|
|
endif
|
|
|
|
# Some toolchain vendors have a regular file naming pattern.
|
|
# For them, mass-define _ACTUAL_SOURCE_TARBALL based _SITE.
|
|
ifneq ($(findstring sourcery.mentor.com/public/gnu_toolchain,$(TOOLCHAIN_EXTERNAL_SITE)),)
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= \
|
|
$(subst -i686-pc-linux-gnu.tar.bz2,.src.tar.bz2,$(subst -i686-pc-linux-gnu-i386-linux.tar.bz2,-i686-pc-linux-gnu.src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE)))
|
|
else ifneq ($(findstring http://releases.linaro.org,$(TOOLCHAIN_EXTERNAL_SITE)),)
|
|
TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= \
|
|
$(subst _linux.tar.xz,_src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE))
|
|
endif
|
|
|
|
# In fact, we don't need to download the toolchain, since it is already
|
|
# available on the system, so force the site and source to be empty so
|
|
# that nothing will be downloaded/extracted.
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED),y)
|
|
TOOLCHAIN_EXTERNAL_SITE =
|
|
TOOLCHAIN_EXTERNAL_SOURCE =
|
|
endif
|
|
|
|
TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO
|
|
|
|
TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES
|
|
|
|
# Normal handling of downloaded toolchain tarball extraction.
|
|
ifneq ($(TOOLCHAIN_EXTERNAL_SOURCE),)
|
|
TOOLCHAIN_EXTERNAL_EXCLUDES = usr/lib/locale/*
|
|
|
|
# As a regular package, the toolchain gets extracted in $(@D), but
|
|
# since it's actually a fairly special package, we need it to be moved
|
|
# into TOOLCHAIN_EXTERNAL_INSTALL_DIR.
|
|
define TOOLCHAIN_EXTERNAL_MOVE
|
|
rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/*
|
|
mkdir -p $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)
|
|
mv $(@D)/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/
|
|
endef
|
|
TOOLCHAIN_EXTERNAL_POST_EXTRACT_HOOKS += \
|
|
TOOLCHAIN_EXTERNAL_MOVE
|
|
endif
|
|
|
|
# Returns the location of the libc.a file for the given compiler + flags
|
|
define toolchain_find_libc_a
|
|
$$(readlink -f $$(LANG=C $(1) -print-file-name=libc.a))
|
|
endef
|
|
|
|
# Returns the sysroot location for the given compiler + flags. We need
|
|
# to handle cases where libc.a is in:
|
|
#
|
|
# - lib/
|
|
# - usr/lib/
|
|
# - lib32/
|
|
# - lib64/
|
|
# - lib32-fp/ (Cavium toolchain)
|
|
# - lib64-fp/ (Cavium toolchain)
|
|
# - usr/lib/<tuple>/ (Linaro toolchain)
|
|
#
|
|
# And variations on these.
|
|
define toolchain_find_sysroot
|
|
$$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64)?([^/]*)?/([^/]*/)?libc\.a::')
|
|
endef
|
|
|
|
# Returns the lib subdirectory for the given compiler + flags (i.e
|
|
# typically lib32 or lib64 for some toolchains)
|
|
define toolchain_find_libdir
|
|
$$(printf $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64)?([^/]*)?)/([^/]*/)?libc.a:\2:')
|
|
endef
|
|
|
|
# Checks for an already installed toolchain: check the toolchain
|
|
# location, check that it supports sysroot, and then verify that it
|
|
# matches the configuration provided in Buildroot: ABI, C++ support,
|
|
# kernel headers version, type of C library and all C library features.
|
|
define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS
|
|
$(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC))
|
|
$(Q)$(call check_unusable_toolchain,$(TOOLCHAIN_EXTERNAL_CC))
|
|
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
|
|
if test -z "$${SYSROOT_DIR}" ; then \
|
|
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
$(call check_kernel_headers_version,\
|
|
$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\
|
|
$(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \
|
|
$(call check_gcc_version,$(TOOLCHAIN_EXTERNAL_CC),\
|
|
$(call qstrip,$(BR2_TOOLCHAIN_GCC_AT_LEAST))); \
|
|
if test "$(BR2_arm)" = "y" ; then \
|
|
$(call check_arm_abi,\
|
|
"$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\
|
|
$(TOOLCHAIN_EXTERNAL_READELF)) ; \
|
|
fi ; \
|
|
if test "$(BR2_INSTALL_LIBSTDCPP)" = "y" ; then \
|
|
$(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \
|
|
fi ; \
|
|
if test "$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)" = "y" ; then \
|
|
$(call check_uclibc,$${SYSROOT_DIR}) ; \
|
|
elif test "$(BR2_TOOLCHAIN_EXTERNAL_MUSL)" = "y" ; then \
|
|
$(call check_musl,$${SYSROOT_DIR}) ; \
|
|
else \
|
|
$(call check_glibc,$${SYSROOT_DIR}) ; \
|
|
fi
|
|
endef
|
|
|
|
# With the musl C library, the libc.so library directly plays the role
|
|
# of the dynamic library loader. We just need to create a symbolic
|
|
# link to libc.so with the appropriate name.
|
|
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y)
|
|
ifeq ($(BR2_i386),y)
|
|
MUSL_ARCH = i386
|
|
else ifeq ($(BR2_ARM_EABIHF),y)
|
|
MUSL_ARCH = armhf
|
|
else
|
|
MUSL_ARCH = $(ARCH)
|
|
endif
|
|
define TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
|
|
ln -sf libc.so $(TARGET_DIR)/lib/ld-musl-$(MUSL_ARCH).so.1
|
|
endef
|
|
TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
|
|
endif
|
|
|
|
# Integration of the toolchain into Buildroot: find the main sysroot
|
|
# and the variant-specific sysroot, then copy the needed libraries to
|
|
# the $(TARGET_DIR) and copy the whole sysroot (libraries and headers)
|
|
# to $(STAGING_DIR).
|
|
#
|
|
# Variables are defined as follows:
|
|
#
|
|
# LIBC_A_LOCATION: location of the libc.a file in the default
|
|
# multilib variant (allows to find the main
|
|
# sysroot directory)
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a
|
|
#
|
|
# SYSROOT_DIR: the main sysroot directory, deduced from
|
|
# LIBC_A_LOCATION by removing the
|
|
# usr/lib[32|64]/libc.a part of the path.
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/
|
|
#
|
|
# ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected
|
|
# multilib variant (taking into account the
|
|
# CFLAGS). Allows to find the sysroot of the
|
|
# selected multilib variant.
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a
|
|
#
|
|
# ARCH_SYSROOT_DIR: the sysroot of the selected multilib variant,
|
|
# deduced from ARCH_LIBC_A_LOCATION by removing
|
|
# usr/lib[32|64]/libc.a at the end of the path.
|
|
# Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/
|
|
#
|
|
# ARCH_LIB_DIR: 'lib', 'lib32' or 'lib64' depending on where libraries
|
|
# are stored. Deduced from ARCH_LIBC_A_LOCATION by
|
|
# looking at usr/lib??/libc.a.
|
|
# Ex: lib
|
|
#
|
|
# ARCH_SUBDIR: the relative location of the sysroot of the selected
|
|
# multilib variant compared to the main sysroot.
|
|
# Ex: mips16/soft-float/el
|
|
#
|
|
# SUPPORT_LIB_DIR: some toolchains, such as recent Linaro toolchains,
|
|
# store GCC support libraries (libstdc++,
|
|
# libgcc_s, etc.) outside of the sysroot. In
|
|
# this case, SUPPORT_LIB_DIR is set to a
|
|
# non-empty value, and points to the directory
|
|
# where these support libraries are
|
|
# available. Those libraries will be copied to
|
|
# our sysroot, and the directory will also be
|
|
# considered when searching libraries for copy
|
|
# to the target filesystem.
|
|
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS
|
|
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
|
|
if test -z "$${SYSROOT_DIR}" ; then \
|
|
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
SUPPORT_LIB_DIR="" ; \
|
|
if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
|
|
LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
|
|
if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \
|
|
SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
|
|
fi ; \
|
|
fi ; \
|
|
ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \
|
|
if test -z "$(BR2_STATIC_LIBS)" ; then \
|
|
$(call MESSAGE,"Copying external toolchain libraries to target...") ; \
|
|
for libs in $(LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/lib); \
|
|
done ; \
|
|
for libs in $(USR_LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/usr/lib); \
|
|
done ; \
|
|
fi ; \
|
|
if test "$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY)" = "y"; then \
|
|
$(call MESSAGE,"Copying gdbserver") ; \
|
|
gdbserver_found=0 ; \
|
|
for d in $${ARCH_SYSROOT_DIR}/usr $${ARCH_SYSROOT_DIR}/../debug-root/usr $${ARCH_SYSROOT_DIR}/usr/$${ARCH_LIB_DIR} ; do \
|
|
if test -f $${d}/bin/gdbserver ; then \
|
|
install -m 0755 -D $${d}/bin/gdbserver $(TARGET_DIR)/usr/bin/gdbserver ; \
|
|
gdbserver_found=1 ; \
|
|
break ; \
|
|
fi ; \
|
|
done ; \
|
|
if [ $${gdbserver_found} -eq 0 ] ; then \
|
|
echo "Could not find gdbserver in external toolchain" ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
fi
|
|
endef
|
|
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS
|
|
$(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \
|
|
if test -z "$${SYSROOT_DIR}" ; then \
|
|
@echo "External toolchain doesn't support --sysroot. Cannot use." ; \
|
|
exit 1 ; \
|
|
fi ; \
|
|
ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
SUPPORT_LIB_DIR="" ; \
|
|
if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
|
|
LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
|
|
if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \
|
|
SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
|
|
fi ; \
|
|
fi ; \
|
|
ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \
|
|
$(call MESSAGE,"Copying external toolchain sysroot to staging...") ; \
|
|
$(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR})
|
|
endef
|
|
|
|
# Special installation target used on the Blackfin architecture when
|
|
# FDPIC is not the primary binary format being used, but the user has
|
|
# nonetheless requested the installation of the FDPIC libraries to the
|
|
# target filesystem.
|
|
ifeq ($(BR2_BFIN_INSTALL_FDPIC_SHARED),y)
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC
|
|
$(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to target...") ; \
|
|
FDPIC_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))/../../bfin-linux-uclibc/bin/bfin-linux-uclibc-gcc ; \
|
|
FDPIC_SYSROOT_DIR="$(call toolchain_find_sysroot,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
FDPIC_LIB_DIR="$(call toolchain_find_libdir,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \
|
|
FDPIC_SUPPORT_LIB_DIR="" ; \
|
|
if test `find $${FDPIC_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \
|
|
FDPIC_LIBSTDCPP_A_LOCATION=$$(LANG=C $${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \
|
|
if [ -e "$${FDPIC_LIBSTDCPP_A_LOCATION}" ]; then \
|
|
FDPIC_SUPPORT_LIB_DIR=`readlink -f $${FDPIC_LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \
|
|
fi ; \
|
|
fi ; \
|
|
for libs in $(LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/lib); \
|
|
done ; \
|
|
for libs in $(USR_LIB_EXTERNAL_LIBS); do \
|
|
$(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/usr/lib); \
|
|
done
|
|
endef
|
|
endif
|
|
|
|
# Special installation target used on the Blackfin architecture when
|
|
# shared FLAT is not the primary format being used, but the user has
|
|
# nonetheless requested the installation of the shared FLAT libraries
|
|
# to the target filesystem. The flat libraries are found and linked
|
|
# according to the index in name "libN.so". Index 1 is reserved for
|
|
# the standard C library. Customer libraries can use 4 and above.
|
|
ifeq ($(BR2_BFIN_INSTALL_FLAT_SHARED),y)
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT
|
|
$(Q)$(call MESSAGE,"Install external toolchain FLAT libraries to target...") ; \
|
|
FLAT_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))../../bfin-uclinux/bin/bfin-uclinux-gcc ; \
|
|
FLAT_LIBC_A_LOCATION=`$${FLAT_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -mid-shared-library -print-file-name=libc`; \
|
|
if [ -f $${FLAT_LIBC_A_LOCATION} -a ! -h $${FLAT_LIBC_A_LOCATION} ] ; then \
|
|
$(INSTALL) -D $${FLAT_LIBC_A_LOCATION} $(TARGET_DIR)/lib/lib1.so; \
|
|
fi
|
|
endef
|
|
endif
|
|
|
|
# Build toolchain wrapper for preprocessor, C and C++ compiler and setup
|
|
# symlinks for everything else. Skip gdb symlink when we are building our
|
|
# own gdb to prevent two gdb's in output/host/usr/bin.
|
|
# The LTO support in gcc creates wrappers for ar, ranlib and nm which load
|
|
# the lto plugin. These wrappers are called *-gcc-ar, *-gcc-ranlib, and
|
|
# *-gcc-nm and should be used instead of the real programs when -flto is
|
|
# used. However, we should not add the toolchain wrapper for them, and they
|
|
# match the *cc-* pattern. Therefore, an additional case is added for *-ar,
|
|
# *-ranlib and *-nm.
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER
|
|
$(Q)cd $(HOST_DIR)/usr/bin; \
|
|
for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \
|
|
base=$${i##*/}; \
|
|
case "$$base" in \
|
|
*-ar|*-ranlib|*-nm) \
|
|
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
|
|
;; \
|
|
*cc|*cc-*|*++|*++-*|*cpp) \
|
|
ln -sf toolchain-wrapper $$base; \
|
|
;; \
|
|
*gdb|*gdbtui) \
|
|
if test "$(BR2_PACKAGE_HOST_GDB)" != "y"; then \
|
|
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
|
|
fi \
|
|
;; \
|
|
*) \
|
|
ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \
|
|
;; \
|
|
esac; \
|
|
done
|
|
endef
|
|
|
|
# This sed magic is taken from Linux headers_install.sh script.
|
|
define TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS
|
|
$(Q)$(call MESSAGE,"Sanitizing kernel headers")
|
|
find $(STAGING_DIR)/usr/include/linux/ -name "*.h" | xargs sed -r -i \
|
|
-e 's/([ \t(])(__user|__force|__iomem)[ \t]/\1/g' \
|
|
-e 's/__attribute_const__([ \t]|$$)/\1/g' \
|
|
-e 's@^#include <linux/compiler.h>@@' \
|
|
-e 's/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$$)/\1__attribute__((packed))\2/g' \
|
|
-e 's/(^|[ \t(])(inline|asm|volatile)([ \t(]|$$)/\1__\2__\3/g' \
|
|
-e 's@#(ifndef|define|endif[ \t]*/[*])[ \t]*_UAPI@#\1 @'
|
|
endef
|
|
|
|
#
|
|
# Generate gdbinit file for use with Buildroot
|
|
#
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT
|
|
$(Q)if test -f $(TARGET_CROSS)gdb ; then \
|
|
$(call MESSAGE,"Installing gdbinit"); \
|
|
$(gen_gdbinit_file); \
|
|
fi
|
|
endef
|
|
|
|
# uClibc-ng dynamic loader is called ld-uClibc.so.1, but gcc is not
|
|
# patched specifically for uClibc-ng, so it continues to generate
|
|
# binaries that expect the dynamic loader to be named ld-uClibc.so.0,
|
|
# like with the original uClibc. Therefore, we create an additional
|
|
# symbolic link to make uClibc-ng systems work properly.
|
|
define TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO
|
|
$(Q)if test -e $(TARGET_DIR)/lib/ld-uClibc.so.1; then \
|
|
ln -sf ld-uClibc.so.1 $(TARGET_DIR)/lib/ld-uClibc.so.0 ; \
|
|
fi
|
|
$(Q)if test -e $(TARGET_DIR)/lib/ld64-uClibc.so.1; then \
|
|
ln -sf ld64-uClibc.so.1 $(TARGET_DIR)/lib/ld64-uClibc.so.0 ; \
|
|
fi
|
|
endef
|
|
|
|
TOOLCHAIN_EXTERNAL_BUILD_CMDS = $(TOOLCHAIN_BUILD_WRAPPER)
|
|
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT)
|
|
endef
|
|
|
|
# Even though we're installing things in both the staging, the host
|
|
# and the target directory, we do everything within the
|
|
# install-staging step, arbitrarily.
|
|
define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_CMDS
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC)
|
|
$(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT)
|
|
$(TOOLCHAIN_EXTERNAL_FIXUP_UCLIBCNG_LDSO)
|
|
endef
|
|
|
|
$(eval $(generic-package))
|